Check kube-apiserver up on all masters before upgrade (#7193) (#7197)

Only checking the kubernetes api on the first master when upgrading is not enough.
Each master needs to be checked before it's upgrade.

Signed-off-by: Rick Haan <rickhaan94@gmail.com>

.ansible-lint

@@ -7,33 +7,14 @@ skip_list:
 
   # These rules are intentionally skipped:
   #
-  # [role-name] "meta/main.yml" Role name role-name does not match ``^+$`` pattern
+  # [E204]: "Lines should be no longer than 160 chars"
-  # Meta roles in Kubespray don't need proper names
+  # This could be re-enabled with a major rewrite in the future.
-  # (Disabled in June 2021)
+  # For now, there's not enough value gain from strictly limiting line length.
-  - 'role-name'
+  # (Disabled in May 2019)
+  - '204'
 
-  # [var-naming] "defaults/main.yml" File defines variable 'apiVersion' that violates variable naming standards
+  # [E701]: "meta/main.yml should contain relevant info"
-  # In Kubespray we use variables that use camelCase to match their k8s counterparts
+  # Roles in Kubespray are not intended to be used/imported by Ansible Galaxy.
-  # (Disabled in June 2021)
+  # While it can be useful to have these metadata available, they are also available in the existing documentation.
-  - 'var-naming'
+  # (Disabled in May 2019)
-
+  - '701'
-  # [fqcn-builtins]
-  # Roles in kubespray don't need fully qualified collection names
-  # (Disabled in Feb 2023)
-  - 'fqcn-builtins'
-
-  # We use template in names
-  - 'name[template]'
-
-  # No changed-when on commands
-  # (Disabled in June 2023 after ansible upgrade; FIXME)
-  - 'no-changed-when'
-
-  # Disable run-once check with free strategy
-  # (Disabled in June 2023 after ansible upgrade; FIXME)
-  - 'run-once[task]'
-exclude_paths:
-  # Generated files
-  - tests/files/custom_cni/cilium.yaml
-  - venv
-  - .github

.ansible-lint-ignore

@@ -1,8 +0,0 @@
-# This file contains ignores rule violations for ansible-lint
-inventory/sample/group_vars/k8s_cluster/k8s-cluster.yml jinja[spacing]
-roles/kubernetes/control-plane/defaults/main/kube-proxy.yml jinja[spacing]
-roles/kubernetes/control-plane/defaults/main/main.yml jinja[spacing]
-roles/kubernetes/kubeadm/defaults/main.yml jinja[spacing]
-roles/kubernetes/node/defaults/main.yml jinja[spacing]
-roles/kubernetes/preinstall/defaults/main.yml jinja[spacing]
-roles/kubespray-defaults/defaults/main/main.yml jinja[spacing]

.gitattributes

@@ -1 +0,0 @@
-docs/_sidebar.md linguist-generated=true

.github/ISSUE_TEMPLATE/bug-report.md

@@ -0,0 +1,44 @@
+---
+name: Bug Report
+about: Report a bug encountered while operating Kubernetes
+labels: kind/bug
+
+---
+<!--
+Please, be ready for followup questions, and please respond in a timely
+manner.  If we can't reproduce a bug or think a feature already exists, we
+might close your issue.  If we're wrong, PLEASE feel free to reopen it and
+explain why.
+-->
+
+**Environment**:
+- **Cloud provider or hardware configuration:**
+
+- **OS (`printf "$(uname -srm)\n$(cat /etc/os-release)\n"`):**
+
+- **Version of Ansible** (`ansible --version`):
+
+- **Version of Python** (`python --version`):
+
+
+**Kubespray version (commit) (`git rev-parse --short HEAD`):**
+
+
+**Network plugin used**:
+
+
+**Full inventory with variables (`ansible -i inventory/sample/inventory.ini all -m debug -a "var=hostvars[inventory_hostname]"`):**
+<!-- We recommend using snippets services like https://gist.github.com/ etc. -->
+
+**Command used to invoke ansible**:
+
+
+**Output of ansible run**:
+<!-- We recommend using snippets services like https://gist.github.com/ etc. -->
+
+**Anything else do we need to know**:
+<!-- By running scripts/collect-info.yaml you can get a lot of useful informations.
+Script can be started by:
+ansible-playbook -i <inventory_file_path> -u <ssh_user> -e ansible_ssh_user=<ssh_user> -b --become-user=root -e dir=`pwd` scripts/collect-info.yaml
+(If you using CoreOS remember to add '-e ansible_python_interpreter=/opt/bin/python').
+After running this command you can find logs in `pwd`/logs.tar.gz. You can even upload somewhere entire file and paste link here.-->

.github/ISSUE_TEMPLATE/bug-report.yaml

@@ -1,124 +0,0 @@
----
-name: Bug Report
-description: Report a bug encountered while using Kubespray
-labels: kind/bug
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Please, be ready for followup questions, and please respond in a timely
-        manner.  If we can't reproduce a bug or think a feature already exists, we
-        might close your issue.  If we're wrong, PLEASE feel free to reopen it and
-        explain why.
-  - type: textarea
-    id: problem
-    attributes:
-      label: What happened?
-      description: |
-        Please provide as much info as possible. Not doing so may result in your bug not being addressed in a timely manner.
-    validations:
-      required: true
-  - type: textarea
-    id: expected
-    attributes:
-      label: What did you expect to happen?
-    validations:
-      required: true
-
-  - type: textarea
-    id: repro
-    attributes:
-      label: How can we reproduce it (as minimally and precisely as possible)?
-    validations:
-      required: true
-
-  - type: markdown
-    attributes:
-      value: '### Environment'
-
-  - type: textarea
-    id: os
-    attributes:
-      label: OS
-      placeholder: 'printf "$(uname -srm)\n$(cat /etc/os-release)\n"'
-    validations:
-      required: true
-
-  - type: textarea
-    id: ansible_version
-    attributes:
-      label: Version of Ansible
-      placeholder: 'ansible --version'
-    validations:
-      required: true
-
-  - type: input
-    id: python_version
-    attributes:
-      label: Version of Python
-      placeholder: 'python --version'
-    validations:
-      required: true
-
-  - type: input
-    id: kubespray_version
-    attributes:
-      label: Version of Kubespray (commit)
-      placeholder: 'git rev-parse --short HEAD'
-    validations:
-      required: true
-
-  - type: dropdown
-    id: network_plugin
-    attributes:
-      label: Network plugin used
-      options:
-        - calico
-        - cilium
-        - cni
-        - custom_cni
-        - flannel
-        - kube-ovn
-        - kube-router
-        - macvlan
-        - meta
-        - multus
-        - ovn4nfv
-        - weave
-    validations:
-      required: true
-
-  - type: textarea
-    id: inventory
-    attributes:
-      label: Full inventory with variables
-      placeholder: 'ansible -i inventory/sample/inventory.ini all -m debug -a "var=hostvars[inventory_hostname]"'
-      description: We recommend using snippets services like https://gist.github.com/ etc.
-    validations:
-      required: true
-
-  - type: input
-    id: ansible_command
-    attributes:
-      label: Command used to invoke ansible
-    validations:
-      required: true
-
-  - type: textarea
-    id: ansible_output
-    attributes:
-      label: Output of ansible run
-      description: We recommend using snippets services like https://gist.github.com/ etc.
-    validations:
-      required: true
-
-  - type: textarea
-    id: anything_else
-    attributes:
-      label: Anything else we need to know
-      description: |
-        By running scripts/collect-info.yaml you can get a lot of useful informations.
-        Script can be started by:
-        ansible-playbook -i <inventory_file_path> -u <ssh_user> -e ansible_ssh_user=<ssh_user> -b --become-user=root -e dir=`pwd` scripts/collect-info.yaml
-        (If you using CoreOS remember to add '-e ansible_python_interpreter=/opt/bin/python').
-        After running this command you can find logs in `pwd`/logs.tar.gz. You can even upload somewhere entire file and paste link here

.github/ISSUE_TEMPLATE/config.yml

@@ -1,5 +0,0 @@
----
-contact_links:
-  - name: Support Request
-    url: https://kubernetes.slack.com/channels/kubespray
-    about: Support request or question relating to Kubernetes

.github/ISSUE_TEMPLATE/enhancement.md

@@ -0,0 +1,11 @@
+---
+name: Enhancement Request
+about: Suggest an enhancement to the Kubespray project
+labels: kind/feature
+
+---
+<!-- Please only use this template for submitting enhancement requests -->
+
+**What would you like to be added**:
+
+**Why is this needed**:

.github/ISSUE_TEMPLATE/enhancement.yaml

@@ -1,20 +0,0 @@
----
-name: Enhancement Request
-description: Suggest an enhancement to the Kubespray project
-labels: kind/feature
-body:
-  - type: markdown
-    attributes:
-      value: Please only use this template for submitting enhancement requests
-  - type: textarea
-    id: what
-    attributes:
-      label: What would you like to be added
-    validations:
-      required: true
-  - type: textarea
-    id: why
-    attributes:
-      label: Why is this needed
-    validations:
-      required: true

.github/ISSUE_TEMPLATE/failing-test.md

@@ -0,0 +1,20 @@
+---
+name: Failing Test
+about: Report test failures in Kubespray CI jobs
+labels: kind/failing-test
+
+---
+
+<!-- Please only use this template for submitting reports about failing tests in Kubespray CI jobs -->
+
+**Which jobs are failing**:
+
+**Which test(s) are failing**:
+
+**Since when has it been failing**:
+
+**Testgrid link**:
+
+**Reason for failure**:
+
+**Anything else we need to know**:

.github/ISSUE_TEMPLATE/failing-test.yaml

@@ -1,41 +0,0 @@
----
-name: Failing Test
-description: Report test failures in Kubespray CI jobs
-labels: kind/failing-test
-body:
-  - type: markdown
-    attributes:
-      value: Please only use this template for submitting reports about failing tests in Kubespray CI jobs
-  - type: textarea
-    id: failing_jobs
-    attributes:
-      label: Which jobs are failing ?
-    validations:
-      required: true
-
-  - type: textarea
-    id: failing_tests
-    attributes:
-      label: Which tests are failing ?
-    validations:
-      required: true
-
-  - type: input
-    id: since_when
-    attributes:
-      label: Since when has it been failing ?
-    validations:
-      required: true
-
-  - type: textarea
-    id: failure_reason
-    attributes:
-      label: Reason for failure
-      description: If you don't know and have no guess, just put "Unknown"
-    validations:
-      required: true
-
-  - type: textarea
-    id: anything_else
-    attributes:
-      label: Anything else we need to know

.github/ISSUE_TEMPLATE/support.md

@@ -0,0 +1,18 @@
+---
+name: Support Request
+about: Support request or question relating to Kubespray
+labels: triage/support
+
+---
+
+<!--
+STOP -- PLEASE READ!
+
+GitHub is not the right place for support requests.
+
+If you're looking for help, check [Stack Overflow](https://stackoverflow.com/questions/tagged/kubespray) and the [troubleshooting guide](https://kubernetes.io/docs/tasks/debug-application-cluster/troubleshooting/).
+
+You can also post your question on the [Kubernetes Slack](http://slack.k8s.io/) or the [Discuss Kubernetes](https://discuss.kubernetes.io/) forum.
+
+If the matter is security related, please disclose it privately via https://kubernetes.io/security/.
+-->

.github/dependabot.yml

@@ -1,9 +0,0 @@
-version: 2
-updates:
-  - package-ecosystem: "pip"
-    directory: "/"
-    schedule:
-      interval: "weekly"
-    labels:
-      - dependencies
-      - release-note-none

.gitignore

@@ -3,26 +3,18 @@
 **/vagrant_ansible_inventory
 *.iml
 temp
-contrib/offline/container-images
-contrib/offline/container-images.tar.gz
-contrib/offline/offline-files
-contrib/offline/offline-files.tar.gz
 .idea
-.vscode
 .tox
 .cache
 *.bak
 *.tfstate
-*.tfstate*backup
+*.tfstate.backup
-*.lock.hcl
 .terraform/
 contrib/terraform/aws/credentials.tfvars
-.terraform.lock.hcl
 /ssh-bastion.conf
 **/*.sw[pon]
 *~
 vagrant/
-plugins/mitogen
 
 # Ansible inventory
 inventory/*
@@ -106,17 +98,3 @@ target/
 # virtualenv
 venv/
 ENV/
-
-# molecule
-roles/**/molecule/**/__pycache__/
-
-# macOS
-.DS_Store
-
-# Temp location used by our scripts
-scripts/tmp/
-tmp.md
-
-# Ansible collection files
-kubernetes_sigs-kubespray*tar.gz
-ansible_collections

.gitlab-ci.yml

@@ -1,20 +1,21 @@
 ---
 stages:
-  - build
+  - unit-tests
-  - test
   - deploy-part1
-  - deploy-extended
+  - moderator
+  - deploy-part2
+  - deploy-part3
+  - deploy-special
 
 variables:
-  KUBESPRAY_VERSION: v2.25.0
+  KUBESPRAY_VERSION: v2.13.3
   FAILFASTCI_NAMESPACE: 'kargo-ci'
   GITLAB_REPOSITORY: 'kargo-ci/kubernetes-sigs-kubespray'
   ANSIBLE_FORCE_COLOR: "true"
   MAGIC: "ci check this"
-  TEST_ID: "$CI_PIPELINE_ID-$CI_JOB_ID"
+  TEST_ID: "$CI_PIPELINE_ID-$CI_BUILD_ID"
   CI_TEST_VARS: "./tests/files/${CI_JOB_NAME}.yml"
   CI_TEST_REGISTRY_MIRROR: "./tests/common/_docker_hub_registry_mirror.yml"
-  CI_TEST_SETTING: "./tests/common/_kubespray_test_settings.yml"
   GS_ACCESS_KEY_ID: $GS_KEY
   GS_SECRET_ACCESS_KEY: $GS_SECRET
   CONTAINER_ENGINE: docker
@@ -25,43 +26,29 @@ variables:
   ANSIBLE_INVENTORY: ./inventory/sample/${CI_JOB_NAME}-${BUILD_NUMBER}.ini
   IDEMPOT_CHECK: "false"
   RESET_CHECK: "false"
-  REMOVE_NODE_CHECK: "false"
   UPGRADE_TEST: "false"
   MITOGEN_ENABLE: "false"
   ANSIBLE_LOG_LEVEL: "-vv"
   RECOVER_CONTROL_PLANE_TEST: "false"
-  RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[2:]:kube_control_plane[1:]"
+  RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[2:],kube-master[1:]"
-  TERRAFORM_VERSION: 1.3.7
-  PIPELINE_IMAGE: "$CI_REGISTRY_IMAGE/pipeline:${CI_PIPELINE_ID}-${CI_COMMIT_SHORT_SHA}"
 
 before_script:
   - ./tests/scripts/rebase.sh
+  - update-alternatives --install /usr/bin/python python /usr/bin/python3 1
+  - python -m pip install -r tests/requirements.txt
   - mkdir -p /.ssh
 
 .job: &job
   tags:
-    - ffci
+    - packet
-  image: $PIPELINE_IMAGE
+  image: quay.io/kubespray/kubespray:$KUBESPRAY_VERSION
   artifacts:
     when: always
     paths:
       - cluster-dump/
-  needs:
-    - pipeline-image
-
-.job-moderated:
-  extends: .job
-  needs:
-    - pipeline-image
-    - ci-not-authorized
-    - check-galaxy-version  # lint
-    - pre-commit            # lint
-    - vagrant-validate      # lint
 
 .testcases: &testcases
-  extends: .job-moderated
+  <<: *job
-  retry: 1
-  interruptible: true
   before_script:
     - update-alternatives --install /usr/bin/python python /usr/bin/python3 1
     - ./tests/scripts/rebase.sh
@@ -69,39 +56,22 @@ before_script:
   script:
     - ./tests/scripts/testcases_run.sh
   after_script:
-    - ./tests/scripts/testcases_cleanup.sh
+    - chronic ./tests/scripts/testcases_cleanup.sh
 
 # For failfast, at least 1 job must be defined in .gitlab-ci.yml
 # Premoderated with manual actions
-ci-not-authorized:
+ci-authorized:
-  stage: build
+  extends: .job
-  before_script: []
+  stage: moderator
-  after_script: []
-  rules:
-    # LGTM or ok-to-test labels
-    - if: $PR_LABELS =~ /.*,(lgtm|approved|ok-to-test).*|^(lgtm|approved|ok-to-test).*/i
-      variables:
-        CI_OK_TO_TEST: '0'
-      when: always
-    - if: $CI_PIPELINE_SOURCE == "schedule" || $CI_PIPELINE_SOURCE == "trigger"
-      variables:
-        CI_OK_TO_TEST: '0'
-    - if: $CI_COMMIT_BRANCH == "master"
-      variables:
-        CI_OK_TO_TEST: '0'
-    - when: always
-      variables:
-        CI_OK_TO_TEST: '1'
   script:
-    - exit $CI_OK_TO_TEST
+    - /bin/sh scripts/premoderator.sh
-  tags:
+  except: ['triggers', 'master']
-    - ffci
+  # Disable ci moderator
-  needs: []
+  only: []
 
 include:
-  - .gitlab-ci/build.yml
   - .gitlab-ci/lint.yml
+  - .gitlab-ci/shellcheck.yml
   - .gitlab-ci/terraform.yml
   - .gitlab-ci/packet.yml
   - .gitlab-ci/vagrant.yml
-  - .gitlab-ci/molecule.yml

.gitlab-ci/build.yml

@@ -1,32 +0,0 @@
----
-.build-container:
-  cache:
-    key: $CI_COMMIT_REF_SLUG
-    paths:
-      - image-cache
-  tags:
-    - ffci
-  stage: build
-  image:
-    name: gcr.io/kaniko-project/executor:debug
-    entrypoint: ['']
-  variables:
-    TAG: $CI_COMMIT_SHORT_SHA
-    PROJECT_DIR: $CI_PROJECT_DIR
-    DOCKERFILE: Dockerfile
-    GODEBUG: "http2client=0"
-  before_script:
-    - echo "{\"auths\":{\"$CI_REGISTRY\":{\"auth\":\"$(echo -n ${CI_REGISTRY_USER}:${CI_REGISTRY_PASSWORD} | base64)\"}}}" > /kaniko/.docker/config.json
-  script:
-    - /kaniko/executor --cache=true
-                       --cache-dir=image-cache
-                       --context $PROJECT_DIR
-                       --dockerfile $PROJECT_DIR/$DOCKERFILE
-                       --label 'git-branch'=$CI_COMMIT_REF_SLUG
-                       --label 'git-tag=$CI_COMMIT_TAG'
-                       --destination $PIPELINE_IMAGE
-
-pipeline-image:
-  extends: .build-container
-  variables:
-    DOCKERFILE: pipeline.Dockerfile

.gitlab-ci/lint.yml

@@ -1,35 +1,76 @@
 ---
-pre-commit:
+yamllint:
-  stage: test
+  extends: .job
-  tags:
+  stage: unit-tests
-  - ffci
+  tags: [light]
-  image: 'ghcr.io/pre-commit-ci/runner-image@sha256:aaf2c7b38b22286f2d381c11673bec571c28f61dd086d11b43a1c9444a813cef'
   variables:
-    PRE_COMMIT_HOME: /pre-commit-cache
+    LANG: C.UTF-8
   script:
-  - pre-commit run --all-files
+    - yamllint --strict .
-  cache:
+  except: ['triggers', 'master']
-    key: pre-commit-all
-    paths:
-    - /pre-commit-cache
-  needs: []
 
 vagrant-validate:
   extends: .job
-  stage: test
+  stage: unit-tests
-  tags: [ffci]
+  tags: [light]
   variables:
-    VAGRANT_VERSION: 2.3.7
+    VAGRANT_VERSION: 2.2.4
   script:
-  - ./tests/scripts/vagrant-validate.sh
+    - ./tests/scripts/vagrant-validate.sh
   except: ['triggers', 'master']
 
+ansible-lint:
+  extends: .job
+  stage: unit-tests
+  tags: [light]
+  # lint every yml/yaml file that looks like it contains Ansible plays
+  script: |-
+    grep -Rl '^- hosts: \|^  hosts: ' --include \*.yml --include \*.yaml . | xargs -P 4 -n 25 ansible-lint -v
+  except: ['triggers', 'master']
 
-# TODO: convert to pre-commit hook
+syntax-check:
-check-galaxy-version:
+  extends: .job
-  needs: []
+  stage: unit-tests
-  stage: test
+  tags: [light]
-  tags: [ffci]
+  variables:
+    ANSIBLE_INVENTORY: inventory/local-tests.cfg
+    ANSIBLE_REMOTE_USER: root
+    ANSIBLE_BECOME: "true"
+    ANSIBLE_BECOME_USER: root
+    ANSIBLE_VERBOSITY: "3"
+  script:
+    - ansible-playbook --syntax-check cluster.yml
+    - ansible-playbook --syntax-check upgrade-cluster.yml
+    - ansible-playbook --syntax-check reset.yml
+    - ansible-playbook --syntax-check extra_playbooks/upgrade-only-k8s.yml
+  except: ['triggers', 'master']
+
+tox-inventory-builder:
+  stage: unit-tests
+  tags: [light]
+  extends: .job
+  before_script:
+    - ./tests/scripts/rebase.sh
+    - apt-get update && apt-get install -y python3-pip
+    - update-alternatives --install /usr/bin/python python /usr/bin/python3 10
+    - python -m pip install -r tests/requirements.txt
+  script:
+    - pip3 install tox
+    - cd contrib/inventory_builder && tox
+  except: ['triggers', 'master']
+
+markdownlint:
+  stage: unit-tests
+  tags: [light]
+  image: node
+  before_script:
+    - npm install -g markdownlint-cli
+  script:
+    - markdownlint README.md docs --ignore docs/_sidebar.md
+
+ci-matrix:
+  stage: unit-tests
+  tags: [light]
   image: python:3
   script:
-  - tests/scripts/check_galaxy_version.sh
+    - tests/scripts/md-table/test.sh

.gitlab-ci/molecule.yml

@@ -1,95 +0,0 @@
----
-.molecule:
-  tags: [ffci-vm-med]
-  only: [/^pr-.*$/]
-  except: ['triggers']
-  image: quay.io/kubespray/vm-kubespray-ci:v6
-  services: []
-  stage: deploy-part1
-  needs: []
-  # - ci-not-authorized
-  variables:
-    VAGRANT_DEFAULT_PROVIDER: "libvirt"
-  before_script:
-  - groups
-  - python3 -m venv citest
-  - source citest/bin/activate
-  - vagrant plugin expunge --reinstall --force --no-tty
-  - vagrant plugin install vagrant-libvirt
-  - pip install --no-compile --no-cache-dir pip -U
-  - pip install --no-compile --no-cache-dir -r $CI_PROJECT_DIR/requirements.txt
-  - pip install --no-compile --no-cache-dir -r $CI_PROJECT_DIR/tests/requirements.txt
-  - ./tests/scripts/rebase.sh
-  - ./tests/scripts/vagrant_clean.sh
-  script:
-  - ./tests/scripts/molecule_run.sh
-  after_script:
-  - ./tests/scripts/molecule_logs.sh
-  artifacts:
-    when: always
-    paths:
-    - molecule_logs/
-
-# CI template for periodic CI jobs
-# Enabled when PERIODIC_CI_ENABLED var is set
-
-.molecule_periodic:
-  only:
-    variables:
-    - $PERIODIC_CI_ENABLED
-  allow_failure: true
-  extends: .molecule
-
-molecule_full:
-  extends: .molecule_periodic
-
-molecule_no_container_engines:
-  extends: .molecule
-  script:
-  - ./tests/scripts/molecule_run.sh -e container-engine
-  when: on_success
-
-molecule_docker:
-  extends: .molecule
-  script:
-  - ./tests/scripts/molecule_run.sh -i container-engine/cri-dockerd
-  when: on_success
-
-molecule_containerd:
-  extends: .molecule
-  script:
-  - ./tests/scripts/molecule_run.sh -i container-engine/containerd
-  when: on_success
-
-molecule_cri-o:
-  extends: .molecule
-  stage: deploy-part1
-  script:
-  - ./tests/scripts/molecule_run.sh -i container-engine/cri-o
-  allow_failure: true
-  when: on_success
-
-# # Stage 3 container engines don't get as much attention so allow them to fail
-# molecule_kata:
-#   extends: .molecule
-#   stage: deploy-extended
-#   script:
-#     - ./tests/scripts/molecule_run.sh -i container-engine/kata-containers
-#   when: manual
-# # FIXME: this test is broken (perma-failing)
-
-molecule_gvisor:
-  extends: .molecule
-  stage: deploy-extended
-  script:
-  - ./tests/scripts/molecule_run.sh -i container-engine/gvisor
-  when: manual
-# FIXME: this test is broken (perma-failing)
-
-molecule_youki:
-  extends: .molecule
-  stage: deploy-extended
-  script:
-  - ./tests/scripts/molecule_run.sh -i container-engine/youki
-  when: manual
-# FIXME: this test is broken (perma-failing)

.gitlab-ci/packet.yml

@@ -1,247 +1,229 @@
 ---
-.packet:
+.packet: &packet
   extends: .testcases
   variables:
-    ANSIBLE_TIMEOUT: "120"
+    CI_PLATFORM: "packet"
-    CI_PLATFORM: packet
+    SSH_USER: "kubespray"
-    SSH_USER: kubespray
   tags:
-    - ffci
+    - packet
-  needs:
+  only: [/^pr-.*$/]
-    - pipeline-image
+  except: ['triggers']
-    - ci-not-authorized
 
-# CI template for PRs
+packet_ubuntu18-calico-aio:
-.packet_pr:
-  stage: deploy-part1
-  rules:
-    - if: $PR_LABELS =~ /.*ci-short.*/
-      when: manual
-      allow_failure: true
-    - if: $CI_COMMIT_BRANCH =~ /^pr-.*$/
-      when: on_success
-    - when: manual
-      allow_failure: true
-  extends: .packet
-
-  ## Uncomment this to have multiple stages
-  # needs:
-  #   - packet_ubuntu20-calico-all-in-one
-
-.packet_pr_short:
   stage: deploy-part1
   extends: .packet
-  rules:
+  when: on_success
-    - if: $CI_COMMIT_BRANCH =~ /^pr-.*$/
-      when: on_success
-    - when: manual
-      allow_failure: true
 
-.packet_pr_manual:
+# Future AIO job
-  extends: .packet_pr
+packet_ubuntu20-calico-aio:
-  stage: deploy-extended
+  stage: deploy-part1
-  rules:
-    - if: $PR_LABELS =~ /.*ci-full.*/
-      when: on_success
-    # Else run as manual
-    - when: manual
-      allow_failure: true
-
-.packet_pr_extended:
-  extends: .packet_pr
-  stage: deploy-extended
-  rules:
-    - if: $PR_LABELS =~ /.*(ci-extended|ci-full).*/
-      when: on_success
-    - when: manual
-      allow_failure: true
-
-# CI template for periodic CI jobs
-# Enabled when PERIODIC_CI_ENABLED var is set
-.packet_periodic:
-  only:
-    variables:
-      - $PERIODIC_CI_ENABLED
-  allow_failure: true
   extends: .packet
-
+  when: on_success
-packet_cleanup_old:
-  stage: deploy-part1
-  extends: .packet_periodic
-  script:
-    - cd tests
-    - make cleanup-packet
-  after_script: []
-
-# The ubuntu20-calico-all-in-one jobs are meant as early stages to prevent running the full CI if something is horribly broken
-packet_ubuntu20-calico-all-in-one:
-  stage: deploy-part1
-  extends: .packet_pr_short
-  variables:
-    RESET_CHECK: "true"
 
 # ### PR JOBS PART2
 
-packet_ubuntu20-crio:
+packet_centos7-flannel-containerd-addons-ha:
-  extends: .packet_pr_manual
+  extends: .packet
-
+  stage: deploy-part2
-packet_ubuntu22-calico-all-in-one:
+  when: on_success
-  extends: .packet_pr
-
-packet_ubuntu24-calico-etcd-datastore:
-  extends: .packet_pr
-
-packet_almalinux8-crio:
-  extends: .packet_pr
-
-packet_almalinux8-kube-ovn:
-  extends: .packet_pr
-
-packet_debian11-calico:
-  extends: .packet_pr
-
-packet_debian11-macvlan:
-  extends: .packet_pr
-
-packet_debian12-cilium:
-  extends: .packet_pr
-
-packet_rockylinux8-calico:
-  extends: .packet_pr
-
-packet_rockylinux9-cilium:
-  extends: .packet_pr
   variables:
-    RESET_CHECK: "true"
+    MITOGEN_ENABLE: "true"
 
-packet_amazon-linux-2-all-in-one:
+packet_centos7-crio:
-  extends: .packet_pr
+  extends: .packet
-
+  stage: deploy-part2
-packet_opensuse-docker-cilium:
+  when: on_success
-  extends: .packet_pr
-
-packet_ubuntu20-cilium-sep:
-  extends: .packet_pr
-
-## Extended
-packet_debian11-docker:
-  extends: .packet_pr_extended
-
-packet_debian12-docker:
-  extends: .packet_pr_extended
-
-packet_debian12-calico:
-  extends: .packet_pr_extended
-
-packet_almalinux8-calico-remove-node:
-  extends: .packet_pr_extended
   variables:
-    REMOVE_NODE_CHECK: "true"
+    MITOGEN_ENABLE: "true"
-    REMOVE_NODE_NAME: "instance-3"
 
-packet_rockylinux9-calico:
+packet_ubuntu18-crio:
-  extends: .packet_pr_extended
+  extends: .packet
+  stage: deploy-part2
+  when: manual
+  variables:
+    MITOGEN_ENABLE: "true"
 
-packet_almalinux8-calico:
+packet_ubuntu16-canal-kubeadm-ha:
-  extends: .packet_pr_extended
+  stage: deploy-part2
+  extends: .packet
+  when: on_success
 
-packet_almalinux8-docker:
+packet_ubuntu16-canal-sep:
-  extends: .packet_pr_extended
+  stage: deploy-special
+  extends: .packet
+  when: manual
 
-packet_ubuntu20-calico-all-in-one-hardening:
+packet_ubuntu16-flannel-ha:
-  extends: .packet_pr_extended
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_ubuntu24-calico-all-in-one:
+packet_ubuntu16-kube-router-sep:
-  extends: .packet_pr_extended
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_ubuntu20-calico-etcd-kubeadm:
+packet_ubuntu16-kube-router-svc-proxy:
-  extends: .packet_pr_extended
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_ubuntu24-all-in-one-docker:
+packet_debian10-cilium-svc-proxy:
-  extends: .packet_pr_extended
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_ubuntu22-all-in-one-docker:
+packet_debian10-containerd:
-  extends: .packet_pr_extended
+  stage: deploy-part2
+  extends: .packet
+  when: on_success
+  variables:
+    MITOGEN_ENABLE: "true"
+
+packet_centos7-calico-ha-once-localhost:
+  stage: deploy-part2
+  extends: .packet
+  when: on_success
+  variables:
+    # This will instruct Docker not to start over TLS.
+    DOCKER_TLS_CERTDIR: ""
+  services:
+    - docker:19.03.9-dind
+
+packet_centos8-kube-ovn:
+  stage: deploy-part2
+  extends: .packet
+  when: on_success
+
+packet_centos8-calico:
+  stage: deploy-part2
+  extends: .packet
+  when: on_success
+
+packet_fedora32-weave:
+  stage: deploy-part2
+  extends: .packet
+  when: on_success
+
+packet_opensuse-canal:
+  stage: deploy-part2
+  extends: .packet
+  when: on_success
+
+packet_ubuntu18-ovn4nfv:
+  stage: deploy-part2
+  extends: .packet
+  when: on_success
+
+# Contiv does not work in k8s v1.16
+# packet_ubuntu16-contiv-sep:
+#   stage: deploy-part2
+#   extends: .packet
+#   when: on_success
 
 # ### MANUAL JOBS
-packet_fedora37-crio:
-  extends: .packet_pr_manual
 
-packet_ubuntu20-flannel-ha:
+packet_ubuntu16-weave-sep:
-  extends: .packet_pr_manual
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_ubuntu20-all-in-one-docker:
+packet_ubuntu18-cilium-sep:
-  extends: .packet_pr_manual
+  stage: deploy-special
+  extends: .packet
+  when: manual
 
-packet_ubuntu20-flannel-ha-once:
+packet_ubuntu18-flannel-containerd-ha:
-  extends: .packet_pr_manual
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_fedora37-calico-swap-selinux:
+packet_ubuntu18-flannel-containerd-ha-once:
-  extends: .packet_pr_manual
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_almalinux8-calico-ha-ebpf:
+packet_debian9-macvlan:
-  extends: .packet_pr_manual
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_almalinux8-calico-nodelocaldns-secondary:
+packet_centos7-calico-ha:
-  extends: .packet_pr_manual
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_debian11-custom-cni:
+packet_centos7-kube-router:
-  extends: .packet_pr_manual
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_debian11-kubelet-csr-approver:
+packet_centos7-multus-calico:
-  extends: .packet_pr_manual
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_debian12-custom-cni-helm:
+packet_oracle7-canal-ha:
-  extends: .packet_pr_manual
+  stage: deploy-part2
+  extends: .packet
+  when: manual
 
-packet_ubuntu20-calico-ha-wireguard:
+packet_fedora31-flannel:
-  extends: .packet_pr_manual
+  stage: deploy-part2
-
+  extends: .packet
-# PERIODIC
+  when: on_success
-packet_fedora38-docker-calico:
-  stage: deploy-extended
-  extends: .packet_periodic
   variables:
-    RESET_CHECK: "true"
+    MITOGEN_ENABLE: "true"
 
-packet_fedora37-calico-selinux:
+packet_amazon-linux-2-aio:
-  stage: deploy-extended
+  stage: deploy-part2
-  extends: .packet_periodic
+  extends: .packet
+  when: manual
 
+packet_fedora32-kube-ovn-containerd:
+  stage: deploy-part2
+  extends: .packet
+  when: on_success
 
-packet_ubuntu20-calico-etcd-kubeadm-upgrade-ha:
+# ### PR JOBS PART3
-  stage: deploy-extended
+# Long jobs (45min+)
-  extends: .packet_periodic
+
+packet_centos7-weave-upgrade-ha:
+  stage: deploy-part3
+  extends: .packet
+  when: on_success
   variables:
     UPGRADE_TEST: basic
+    MITOGEN_ENABLE: "false"
 
-
+packet_debian9-calico-upgrade:
-packet_debian11-calico-upgrade-once:
+  stage: deploy-part3
-  stage: deploy-extended
+  extends: .packet
-  extends: .packet_periodic
+  when: on_success
   variables:
     UPGRADE_TEST: graceful
+    MITOGEN_ENABLE: "false"
 
-packet_ubuntu20-calico-ha-recover:
+packet_debian9-calico-upgrade-once:
-  stage: deploy-extended
+  stage: deploy-part3
-  extends: .packet_periodic
+  extends: .packet
-  variables:
+  when: on_success
-    RECOVER_CONTROL_PLANE_TEST: "true"
-    RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[2:]:kube_control_plane[1:]"
-
-packet_ubuntu20-calico-ha-recover-noquorum:
-  stage: deploy-extended
-  extends: .packet_periodic
-  variables:
-    RECOVER_CONTROL_PLANE_TEST: "true"
-    RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[1:]:kube_control_plane[1:]"
-
-packet_debian11-calico-upgrade:
-  stage: deploy-extended
-  extends: .packet_periodic
   variables:
     UPGRADE_TEST: graceful
+    MITOGEN_ENABLE: "false"
 
-packet_debian12-cilium-svc-proxy:
+packet_ubuntu18-calico-ha-recover:
-  stage: deploy-extended
+  stage: deploy-part3
-  extends: .packet_periodic
+  extends: .packet
+  when: on_success
+  variables:
+    RECOVER_CONTROL_PLANE_TEST: "true"
+    RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[2:],kube-master[1:]"
+
+packet_ubuntu18-calico-ha-recover-noquorum:
+  stage: deploy-part3
+  extends: .packet
+  when: on_success
+  variables:
+    RECOVER_CONTROL_PLANE_TEST: "true"
+    RECOVER_CONTROL_PLANE_TEST_GROUPS: "etcd[1:],kube-master[1:]"

.gitlab-ci/pre-commit-dynamic-stub.yml

@@ -1,17 +0,0 @@
----
-# stub pipeline for dynamic generation
-pre-commit:
-  tags:
-  - light
-  image: 'ghcr.io/pre-commit-ci/runner-image@sha256:aaf2c7b38b22286f2d381c11673bec571c28f61dd086d11b43a1c9444a813cef'
-  variables:
-    PRE_COMMIT_HOME: /pre-commit-cache
-  script:
-  - pre-commit run --all-files
-  cache:
-    key: pre-commit-$HOOK_ID
-    paths:
-    - /pre-commit-cache
-  parallel:
-    matrix:
-    - HOOK_ID:

.gitlab-ci/shellcheck.yml

@@ -0,0 +1,16 @@
+---
+shellcheck:
+  extends: .job
+  stage: unit-tests
+  tags: [light]
+  variables:
+    SHELLCHECK_VERSION: v0.6.0
+  before_script:
+    - ./tests/scripts/rebase.sh
+    - curl --silent --location "https://github.com/koalaman/shellcheck/releases/download/"${SHELLCHECK_VERSION}"/shellcheck-"${SHELLCHECK_VERSION}".linux.x86_64.tar.xz" | tar -xJv
+    - cp shellcheck-"${SHELLCHECK_VERSION}"/shellcheck /usr/bin/
+    - shellcheck --version
+  script:
+    # Run shellcheck for all *.sh except contrib/
+    - find . -name '*.sh' -not -path './contrib/*' -not -path './.git/*' | xargs shellcheck --severity error
+  except: ['triggers', 'master']

.gitlab-ci/terraform.yml

@@ -2,10 +2,6 @@
 # Tests for contrib/terraform/
 .terraform_install:
   extends: .job
-  needs:
-    - ci-not-authorized
-    - pipeline-image
-  stage: deploy-part1
   before_script:
     - update-alternatives --install /usr/bin/python python /usr/bin/python3 1
     - ./tests/scripts/rebase.sh
@@ -16,31 +12,29 @@
     # Prepare inventory
     - cp contrib/terraform/$PROVIDER/sample-inventory/cluster.tfvars .
     - ln -s contrib/terraform/$PROVIDER/hosts
-    - terraform -chdir="contrib/terraform/$PROVIDER" init
+    - terraform init contrib/terraform/$PROVIDER
     # Copy SSH keypair
     - mkdir -p ~/.ssh
     - echo "$PACKET_PRIVATE_KEY" | base64 -d > ~/.ssh/id_rsa
     - chmod 400 ~/.ssh/id_rsa
     - echo "$PACKET_PUBLIC_KEY" | base64 -d > ~/.ssh/id_rsa.pub
-    - mkdir -p contrib/terraform/$PROVIDER/group_vars
+    - mkdir -p group_vars
     # Random subnet to avoid routing conflicts
     - export TF_VAR_subnet_cidr="10.$(( $RANDOM % 256 )).$(( $RANDOM % 256 )).0/24"
 
 .terraform_validate:
   extends: .terraform_install
-  tags: [ffci]
+  stage: unit-tests
+  tags: [light]
   only: ['master', /^pr-.*$/]
   script:
-    - terraform -chdir="contrib/terraform/$PROVIDER" validate
+    - terraform validate -var-file=cluster.tfvars contrib/terraform/$PROVIDER
-    - terraform -chdir="contrib/terraform/$PROVIDER" fmt -check -diff
+    - terraform fmt -check -diff contrib/terraform/$PROVIDER
-  stage: test
-  needs:
-    - pipeline-image
 
 .terraform_apply:
   extends: .terraform_install
-  tags: [ffci]
+  tags: [light]
-  stage: deploy-extended
+  stage: deploy-part3
   when: manual
   only: [/^pr-.*$/]
   artifacts:
@@ -57,74 +51,56 @@
     - tests/scripts/testcases_run.sh
   after_script:
     # Cleanup regardless of exit code
-    - ./tests/scripts/testcases_cleanup.sh
+    - chronic ./tests/scripts/testcases_cleanup.sh
 
 tf-validate-openstack:
   extends: .terraform_validate
   variables:
-    TF_VERSION: $TERRAFORM_VERSION
+    TF_VERSION: 0.12.24
     PROVIDER: openstack
     CLUSTER: $CI_COMMIT_REF_NAME
 
-tf-validate-equinix:
+tf-validate-packet:
   extends: .terraform_validate
   variables:
-    TF_VERSION: $TERRAFORM_VERSION
+    TF_VERSION: 0.12.24
-    PROVIDER: equinix
+    PROVIDER: packet
     CLUSTER: $CI_COMMIT_REF_NAME
 
 tf-validate-aws:
   extends: .terraform_validate
   variables:
-    TF_VERSION: $TERRAFORM_VERSION
+    TF_VERSION: 0.12.24
     PROVIDER: aws
     CLUSTER: $CI_COMMIT_REF_NAME
 
-tf-validate-exoscale:
+# tf-packet-ubuntu16-default:
-  extends: .terraform_validate
-  variables:
-    TF_VERSION: $TERRAFORM_VERSION
-    PROVIDER: exoscale
-
-tf-validate-hetzner:
-  extends: .terraform_validate
-  variables:
-    TF_VERSION: $TERRAFORM_VERSION
-    PROVIDER: hetzner
-
-tf-validate-vsphere:
-  extends: .terraform_validate
-  variables:
-    TF_VERSION: $TERRAFORM_VERSION
-    PROVIDER: vsphere
-    CLUSTER: $CI_COMMIT_REF_NAME
-
-tf-validate-upcloud:
-  extends: .terraform_validate
-  variables:
-    TF_VERSION: $TERRAFORM_VERSION
-    PROVIDER: upcloud
-    CLUSTER: $CI_COMMIT_REF_NAME
-
-tf-validate-nifcloud:
-  extends: .terraform_validate
-  variables:
-    TF_VERSION: $TERRAFORM_VERSION
-    PROVIDER: nifcloud
-
-# tf-packet-ubuntu20-default:
 #   extends: .terraform_apply
 #   variables:
-#     TF_VERSION: $TERRAFORM_VERSION
+#     TF_VERSION: 0.12.24
 #     PROVIDER: packet
 #     CLUSTER: $CI_COMMIT_REF_NAME
 #     TF_VAR_number_of_k8s_masters: "1"
 #     TF_VAR_number_of_k8s_nodes: "1"
 #     TF_VAR_plan_k8s_masters: t1.small.x86
 #     TF_VAR_plan_k8s_nodes: t1.small.x86
-#     TF_VAR_metro: am
+#     TF_VAR_facility: ewr1
 #     TF_VAR_public_key_path: ""
-#     TF_VAR_operating_system: ubuntu_20_04
+#     TF_VAR_operating_system: ubuntu_16_04
+#
+# tf-packet-ubuntu18-default:
+#   extends: .terraform_apply
+#   variables:
+#     TF_VERSION: 0.12.24
+#     PROVIDER: packet
+#     CLUSTER: $CI_COMMIT_REF_NAME
+#     TF_VAR_number_of_k8s_masters: "1"
+#     TF_VAR_number_of_k8s_nodes: "1"
+#     TF_VAR_plan_k8s_masters: t1.small.x86
+#     TF_VAR_plan_k8s_nodes: t1.small.x86
+#     TF_VAR_facility: ams1
+#     TF_VAR_public_key_path: ""
+#     TF_VAR_operating_system: ubuntu_18_04
 
 .ovh_variables: &ovh_variables
   OS_AUTH_URL: https://auth.cloud.ovh.net/v3
@@ -150,9 +126,14 @@ tf-validate-nifcloud:
   OS_INTERFACE: public
   OS_IDENTITY_API_VERSION: "3"
   TF_VAR_router_id: "ab95917c-41fb-4881-b507-3a6dfe9403df"
+  # Since ELASTX is in Stockholm, Mitogen helps with latency
+  MITOGEN_ENABLE: "false"
+  # Mitogen doesn't support interpreter discovery yet
+  ANSIBLE_PYTHON_INTERPRETER: "/usr/bin/python3"
 
 tf-elastx_cleanup:
-  tags: [ffci]
+  stage: unit-tests
+  tags: [light]
   image: python
   variables:
     <<: *elastx_variables
@@ -160,16 +141,14 @@ tf-elastx_cleanup:
     - pip install -r scripts/openstack-cleanup/requirements.txt
   script:
     - ./scripts/openstack-cleanup/main.py
-  allow_failure: true
 
-tf-elastx_ubuntu20-calico:
+tf-elastx_ubuntu18-calico:
   extends: .terraform_apply
-  stage: deploy-part1
+  stage: deploy-part3
   when: on_success
-  allow_failure: true
   variables:
     <<: *elastx_variables
-    TF_VERSION: $TERRAFORM_VERSION
+    TF_VERSION: 0.12.24
     PROVIDER: openstack
     CLUSTER: $CI_COMMIT_REF_NAME
     ANSIBLE_TIMEOUT: "60"
@@ -192,48 +171,47 @@ tf-elastx_ubuntu20-calico:
     TF_VAR_az_list_node: '["sto1"]'
     TF_VAR_flavor_k8s_master: 3f73fc93-ec61-4808-88df-2580d94c1a9b    # v1-standard-2
     TF_VAR_flavor_k8s_node: 3f73fc93-ec61-4808-88df-2580d94c1a9b      # v1-standard-2
-    TF_VAR_image: ubuntu-20.04-server-latest
+    TF_VAR_image: ubuntu-18.04-server-latest
     TF_VAR_k8s_allowed_remote_ips: '["0.0.0.0/0"]'
 
-# OVH voucher expired, commenting job until things are sorted  out
 
-# tf-ovh_cleanup:
+tf-ovh_cleanup:
-#  stage: unit-tests
+  stage: unit-tests
-#  tags: [light]
+  tags: [light]
-#  image: python
+  image: python
-#  environment: ovh
+  environment: ovh
-#  variables:
+  variables:
-#    <<: *ovh_variables
+    <<: *ovh_variables
-#  before_script:
+  before_script:
-#    - pip install -r scripts/openstack-cleanup/requirements.txt
+    - pip install -r scripts/openstack-cleanup/requirements.txt
-#  script:
+  script:
-#    - ./scripts/openstack-cleanup/main.py
+    - ./scripts/openstack-cleanup/main.py
 
-# tf-ovh_ubuntu20-calico:
+tf-ovh_ubuntu18-calico:
-#  extends: .terraform_apply
+  extends: .terraform_apply
-#  when: on_success
+  when: on_success
-#  environment: ovh
+  environment: ovh
-#  variables:
+  variables:
-#    <<: *ovh_variables
+    <<: *ovh_variables
-#    TF_VERSION: $TERRAFORM_VERSION
+    TF_VERSION: 0.12.24
-#    PROVIDER: openstack
+    PROVIDER: openstack
-#    CLUSTER: $CI_COMMIT_REF_NAME
+    CLUSTER: $CI_COMMIT_REF_NAME
-#    ANSIBLE_TIMEOUT: "60"
+    ANSIBLE_TIMEOUT: "60"
-#    SSH_USER: ubuntu
+    SSH_USER: ubuntu
-#    TF_VAR_number_of_k8s_masters: "0"
+    TF_VAR_number_of_k8s_masters: "0"
-#    TF_VAR_number_of_k8s_masters_no_floating_ip: "1"
+    TF_VAR_number_of_k8s_masters_no_floating_ip: "1"
-#    TF_VAR_number_of_k8s_masters_no_floating_ip_no_etcd: "0"
+    TF_VAR_number_of_k8s_masters_no_floating_ip_no_etcd: "0"
-#    TF_VAR_number_of_etcd: "0"
+    TF_VAR_number_of_etcd: "0"
-#    TF_VAR_number_of_k8s_nodes: "0"
+    TF_VAR_number_of_k8s_nodes: "0"
-#    TF_VAR_number_of_k8s_nodes_no_floating_ip: "1"
+    TF_VAR_number_of_k8s_nodes_no_floating_ip: "1"
-#    TF_VAR_number_of_gfs_nodes_no_floating_ip: "0"
+    TF_VAR_number_of_gfs_nodes_no_floating_ip: "0"
-#    TF_VAR_number_of_bastions: "0"
+    TF_VAR_number_of_bastions: "0"
-#    TF_VAR_number_of_k8s_masters_no_etcd: "0"
+    TF_VAR_number_of_k8s_masters_no_etcd: "0"
-#    TF_VAR_use_neutron: "0"
+    TF_VAR_use_neutron: "0"
-#    TF_VAR_floatingip_pool: "Ext-Net"
+    TF_VAR_floatingip_pool: "Ext-Net"
-#    TF_VAR_external_net: "6011fbc9-4cbf-46a4-8452-6890a340b60b"
+    TF_VAR_external_net: "6011fbc9-4cbf-46a4-8452-6890a340b60b"
-#    TF_VAR_network_name: "Ext-Net"
+    TF_VAR_network_name: "Ext-Net"
-#    TF_VAR_flavor_k8s_master: "defa64c3-bd46-43b4-858a-d93bbae0a229"    # s1-8
+    TF_VAR_flavor_k8s_master: "defa64c3-bd46-43b4-858a-d93bbae0a229"    # s1-8
-#    TF_VAR_flavor_k8s_node: "defa64c3-bd46-43b4-858a-d93bbae0a229"      # s1-8
+    TF_VAR_flavor_k8s_node: "defa64c3-bd46-43b4-858a-d93bbae0a229"      # s1-8
-#    TF_VAR_image: "Ubuntu 20.04"
+    TF_VAR_image: "Ubuntu 18.04"
-#    TF_VAR_k8s_allowed_remote_ips: '["0.0.0.0/0"]'
+    TF_VAR_k8s_allowed_remote_ips: '["0.0.0.0/0"]'

.gitlab-ci/vagrant.yml

@@ -1,63 +1,54 @@
 ---
+
+molecule_tests:
+  tags: [c3.small.x86]
+  only: [/^pr-.*$/]
+  except: ['triggers']
+  image: quay.io/kubespray/vagrant:$KUBESPRAY_VERSION
+  services: []
+  stage: deploy-part1
+  before_script:
+    - tests/scripts/rebase.sh
+    - apt-get update && apt-get install -y python3-pip
+    - update-alternatives --install /usr/bin/python python /usr/bin/python3 10
+    - python -m pip install -r tests/requirements.txt
+    - ./tests/scripts/vagrant_clean.sh
+  script:
+    - ./tests/scripts/molecule_run.sh
+
 .vagrant:
   extends: .testcases
-  needs:
-    - ci-not-authorized
   variables:
     CI_PLATFORM: "vagrant"
     SSH_USER: "vagrant"
     VAGRANT_DEFAULT_PROVIDER: "libvirt"
     KUBESPRAY_VAGRANT_CONFIG: tests/files/${CI_JOB_NAME}.rb
-    DOCKER_NAME: vagrant
+  tags: [c3.small.x86]
-    VAGRANT_ANSIBLE_TAGS: facts
+  only: [/^pr-.*$/]
-  tags: [ffci-vm-large]
+  except: ['triggers']
-  # only: [/^pr-.*$/]
+  image: quay.io/kubespray/vagrant:$KUBESPRAY_VERSION
-  # except: ['triggers']
-  image: quay.io/kubespray/vm-kubespray-ci:v6
   services: []
   before_script:
-    - echo $USER
+    - apt-get update && apt-get install -y python3-pip
-    - python3 -m venv citest
+    - update-alternatives --install /usr/bin/python python /usr/bin/python3 10
-    - source citest/bin/activate
+    - python -m pip install -r tests/requirements.txt
-    - vagrant plugin expunge --reinstall --force --no-tty
-    - vagrant plugin install vagrant-libvirt
-    - pip install --no-compile --no-cache-dir pip -U
-    - pip install --no-compile --no-cache-dir -r $CI_PROJECT_DIR/requirements.txt
-    - pip install --no-compile --no-cache-dir -r $CI_PROJECT_DIR/tests/requirements.txt
     - ./tests/scripts/vagrant_clean.sh
   script:
     - ./tests/scripts/testcases_run.sh
+  after_script:
+    - chronic ./tests/scripts/testcases_cleanup.sh
 
-vagrant_ubuntu20-calico-dual-stack:
+vagrant_ubuntu18-flannel:
-  stage: deploy-extended
+  stage: deploy-part2
-  extends: .vagrant
-  when: manual
-# FIXME: this test if broken (perma-failing)
-
-vagrant_ubuntu20-flannel:
-  stage: deploy-part1
   extends: .vagrant
   when: on_success
-  allow_failure: false
 
-vagrant_ubuntu20-flannel-collection:
+vagrant_ubuntu18-weave-medium:
-  stage: deploy-extended
+  stage: deploy-part2
   extends: .vagrant
   when: manual
 
-vagrant_ubuntu20-kube-router-sep:
+vagrant_ubuntu20-flannel:
-  stage: deploy-extended
+  stage: deploy-part2
   extends: .vagrant
-  when: manual
+  when: on_success
-
-# Service proxy test fails connectivity testing
-vagrant_ubuntu20-kube-router-svc-proxy:
-  stage: deploy-extended
-  extends: .vagrant
-  when: manual
-
-vagrant_fedora37-kube-router:
-  stage: deploy-extended
-  extends: .vagrant
-  when: manual
-# FIXME: this test if broken (perma-failing)

.markdownlint.yaml

@@ -0,0 +1,2 @@
+---
+MD013: false

.md_style.rb

@@ -1,4 +0,0 @@
-all
-exclude_rule 'MD013'
-exclude_rule 'MD029'
-rule 'MD007', :indent => 2

.mdlrc

@@ -1 +0,0 @@
-style "#{File.dirname(__FILE__)}/.md_style.rb"

.pre-commit-config.yaml

@@ -1,110 +0,0 @@
----
-repos:
-  - repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.6.0
-    hooks:
-      - id: check-added-large-files
-      - id: check-case-conflict
-      - id: check-executables-have-shebangs
-      - id: check-xml
-      - id: check-merge-conflict
-      - id: detect-private-key
-      - id: end-of-file-fixer
-      - id: forbid-new-submodules
-      - id: requirements-txt-fixer
-      - id: trailing-whitespace
-
-  - repo: https://github.com/adrienverge/yamllint.git
-    rev: v1.35.1
-    hooks:
-      - id: yamllint
-        args: [--strict]
-
-  - repo: https://github.com/markdownlint/markdownlint
-    rev: v0.12.0
-    hooks:
-      - id: markdownlint
-        exclude: "^.github|(^docs/_sidebar\\.md$)"
-
-  - repo: https://github.com/shellcheck-py/shellcheck-py
-    rev: v0.10.0.1
-    hooks:
-      - id: shellcheck
-        args: ["--severity=error"]
-        exclude: "^.git"
-        files: "\\.sh$"
-
-  - repo: https://github.com/ansible/ansible-lint
-    rev: v24.5.0
-    hooks:
-      - id: ansible-lint
-        additional_dependencies:
-          - ansible==9.8.0
-          - jsonschema==4.22.0
-          - jmespath==1.0.1
-          - netaddr==1.3.0
-          - distlib
-
-  - repo: https://github.com/golangci/misspell
-    rev: v0.6.0
-    hooks:
-      - id: misspell
-        exclude: "OWNERS_ALIASES$"
-
-  - repo: local
-    hooks:
-      - id: ansible-syntax-check
-        name: ansible-syntax-check
-        entry: env ANSIBLE_INVENTORY=inventory/local-tests.cfg ANSIBLE_REMOTE_USER=root ANSIBLE_BECOME="true" ANSIBLE_BECOME_USER=root ANSIBLE_VERBOSITY="3" ansible-playbook --syntax-check
-        language: python
-        files: "^cluster.yml|^upgrade-cluster.yml|^reset.yml|^extra_playbooks/upgrade-only-k8s.yml"
-        additional_dependencies:
-          - ansible==9.5.1
-
-      - id: tox-inventory-builder
-        name: tox-inventory-builder
-        entry: bash -c "cd contrib/inventory_builder && tox"
-        language: python
-        pass_filenames: false
-        additional_dependencies:
-          - tox==4.15.0
-
-      - id: check-readme-versions
-        name: check-readme-versions
-        entry: tests/scripts/check_readme_versions.sh
-        language: script
-        pass_filenames: false
-
-      - id: collection-build-install
-        name: Build and install kubernetes-sigs.kubespray Ansible collection
-        language: python
-        additional_dependencies:
-          - ansible-core>=2.16.4
-          - distlib
-        entry: tests/scripts/collection-build-install.sh
-        pass_filenames: false
-
-      - id: generate-docs-sidebar
-        name: generate-docs-sidebar
-        entry: scripts/gen_docs_sidebar.sh
-        language: script
-        pass_filenames: false
-
-      - id: ci-matrix
-        name: ci-matrix
-        entry: tests/scripts/md-table/main.py
-        language: python
-        pass_filenames: false
-        additional_dependencies:
-          - jinja2
-          - pathlib
-          - pyaml
-
-      - id: jinja-syntax-check
-        name: jinja-syntax-check
-        entry: tests/scripts/check-templates.py
-        language: python
-        types:
-          - jinja
-        additional_dependencies:
-          - jinja2

.yamllint

@@ -1,12 +1,6 @@
 ---
 extends: default
 
-ignore: |
-  .git/
-  .github/
-  # Generated file
-  tests/files/custom_cni/cilium.yaml
-# https://ansible.readthedocs.io/projects/lint/rules/yaml/
 rules:
   braces:
     min-spaces-inside: 0
@@ -14,16 +8,9 @@ rules:
   brackets:
     min-spaces-inside: 0
     max-spaces-inside: 1
-  comments:
-    min-spaces-from-content: 1
-  # https://github.com/adrienverge/yamllint/issues/384
-  comments-indentation: false
   indentation:
     spaces: 2
     indent-sequences: consistent
   line-length: disable
   new-line-at-end-of-file: disable
-  octal-values:
-    forbid-implicit-octal: true # yamllint defaults to false
-    forbid-explicit-octal: true # yamllint defaults to false
   truthy: disable

CHANGELOG.md

@@ -1 +0,0 @@
-# See our release notes on [GitHub](https://github.com/kubernetes-sigs/kubespray/releases)

CNAME

@@ -1 +1 @@
-kubespray.io
+kubespray.io

CONTRIBUTING.md

@@ -6,23 +6,11 @@
 
 It is recommended to use filter to manage the GitHub email notification, see [examples for setting filters to Kubernetes Github notifications](https://github.com/kubernetes/community/blob/master/communication/best-practices.md#examples-for-setting-filters-to-kubernetes-github-notifications)
 
-To install development dependencies you can set up a python virtual env with the necessary dependencies:
+To install development dependencies you can use `pip install -r tests/requirements.txt`
-
-```ShellSession
-virtualenv venv
-source venv/bin/activate
-pip install -r tests/requirements.txt
-ansible-galaxy install -r tests/requirements.yml
-```
 
 #### Linting
 
-Kubespray uses [pre-commit](https://pre-commit.com) hook configuration to run several linters, please install this tool and use it to run validation tests before submitting a PR.
+Kubespray uses `yamllint` and `ansible-lint`. To run them locally use `yamllint .` and `./tests/scripts/ansible-lint.sh`
-
-```ShellSession
-pre-commit install
-pre-commit run -a  # To run pre-commit hook on all files in the repository, even if they were not modified
-```
 
 #### Molecule
 
@@ -39,9 +27,5 @@ Vagrant with VirtualBox or libvirt driver helps you to quickly spin test cluster
 1. Submit an issue describing your proposed change to the repo in question.
 2. The [repo owners](OWNERS) will respond to your issue promptly.
 3. Fork the desired repo, develop and test your code changes.
-4. Install [pre-commit](https://pre-commit.com) and install it in your development repo.
+4. Sign the CNCF CLA (<https://git.k8s.io/community/CLA.md#the-contributor-license-agreement>)
-5. Addess any pre-commit validation failures.
+5. Submit a pull request.
-6. Sign the CNCF CLA (<https://git.k8s.io/community/CLA.md#the-contributor-license-agreement>)
-7. Submit a pull request.
-8. Work with the reviewers on their suggestions.
-9. Ensure to rebase to the HEAD of your target branch and squash un-necessary commits (<https://blog.carbonfive.com/always-squash-and-rebase-your-git-commits/>) before final merger of your contribution.

Dockerfile

@@ -1,52 +1,21 @@
-# syntax=docker/dockerfile:1
+FROM ubuntu:18.04
 
-# Use imutable image tags rather than mutable tags (like ubuntu:22.04)
+RUN mkdir /kubespray
-FROM ubuntu:22.04@sha256:149d67e29f765f4db62aa52161009e99e389544e25a8f43c8c89d4a445a7ca37
+WORKDIR /kubespray
+RUN apt update -y && \
+    apt install -y \
+    libssl-dev python3-dev sshpass apt-transport-https jq moreutils \
+    ca-certificates curl gnupg2 software-properties-common python3-pip rsync
+RUN curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add - && \
+    add-apt-repository \
+    "deb [arch=amd64] https://download.docker.com/linux/ubuntu \
+    $(lsb_release -cs) \
+    stable" \
+    && apt update -y && apt-get install docker-ce -y
+COPY . .
+RUN /usr/bin/python3 -m pip install pip -U && /usr/bin/python3 -m pip install -r tests/requirements.txt && python3 -m pip install -r requirements.txt && update-alternatives --install /usr/bin/python python /usr/bin/python3 1
+RUN curl -LO https://storage.googleapis.com/kubernetes-release/release/v1.17.5/bin/linux/amd64/kubectl \
+    && chmod a+x kubectl && cp kubectl /usr/local/bin/kubectl
 
 # Some tools like yamllint need this
-# Pip needs this as well at the moment to install ansible
+ENV LANG=C.UTF-8
-# (and potentially other packages)
-# See: https://github.com/pypa/pip/issues/10219
-ENV LANG=C.UTF-8 \
-    DEBIAN_FRONTEND=noninteractive \
-    PYTHONDONTWRITEBYTECODE=1
-
-WORKDIR /kubespray
-
-# hadolint ignore=DL3008
-RUN --mount=type=cache,target=/var/cache/apt,sharing=locked \
-    apt-get update -q \
-    && apt-get install -yq --no-install-recommends \
-    curl \
-    python3 \
-    python3-pip \
-    sshpass \
-    vim \
-    rsync \
-    openssh-client \
-    && apt-get clean \
-    && rm -rf /var/lib/apt/lists/* /var/log/*
-
-RUN --mount=type=bind,source=requirements.txt,target=requirements.txt \
-    --mount=type=cache,sharing=locked,id=pipcache,mode=0777,target=/root/.cache/pip \
-    pip install --no-compile --no-cache-dir -r requirements.txt \
-    && find /usr -type d -name '*__pycache__' -prune -exec rm -rf {} \;
-
-SHELL ["/bin/bash", "-o", "pipefail", "-c"]
-
-RUN --mount=type=bind,source=roles/kubespray-defaults/defaults/main/main.yml,target=roles/kubespray-defaults/defaults/main/main.yml \
-    KUBE_VERSION=$(sed -n 's/^kube_version: //p' roles/kubespray-defaults/defaults/main/main.yml) \
-    OS_ARCHITECTURE=$(dpkg --print-architecture) \
-    && curl -L "https://dl.k8s.io/release/${KUBE_VERSION}/bin/linux/${OS_ARCHITECTURE}/kubectl" -o /usr/local/bin/kubectl \
-    && echo "$(curl -L "https://dl.k8s.io/release/${KUBE_VERSION}/bin/linux/${OS_ARCHITECTURE}/kubectl.sha256")" /usr/local/bin/kubectl | sha256sum --check \
-    && chmod a+x /usr/local/bin/kubectl
-
-COPY *.yml ./
-COPY *.cfg ./
-COPY roles ./roles
-COPY contrib ./contrib
-COPY inventory ./inventory
-COPY library ./library
-COPY extra_playbooks ./extra_playbooks
-COPY playbooks ./playbooks
-COPY plugins ./plugins

LICENSE

@@ -187,7 +187,7 @@
       identification within third-party archives.
 
    Copyright 2016 Kubespray
-
+   
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

Makefile

@@ -1,7 +1,5 @@
 mitogen:
-	@echo Mitogen support is deprecated.
+	ansible-playbook -c local mitogen.yml -vv
-	@echo Please run the following command manually:
-	@echo   ansible-playbook -c local mitogen.yml -vv
 clean:
 	rm -rf dist/
 	rm *.retry

OWNERS

@@ -4,5 +4,3 @@ approvers:
   - kubespray-approvers
 reviewers:
   - kubespray-reviewers
-emeritus_approvers:
-  - kubespray-emeritus_approvers

OWNERS_ALIASES

@@ -1,24 +1,19 @@
 aliases:
   kubespray-approvers:
-    - cristicalin
-    - floryut
-    - liupeng0518
-    - mzaian
-    - oomichi
-    - yankay
     - ant31
-  kubespray-reviewers:
+    - mattymo
-    - cyclinder
-    - erikjiang
-    - mrfreezeex
-    - mzaian
-    - vannten
-    - yankay
-  kubespray-emeritus_approvers:
     - atoms
     - chadswen
-    - luckysb
+    - mirwan
-    - mattymo
     - miouge1
     - riverzhang
+    - verwilst
     - woopstar
+    - luckysb
+  kubespray-reviewers:
+    - jjungnickel
+    - archifleks
+    - holmsten
+    - bozzo
+    - floryut
+    - eppo

README.md

@@ -5,7 +5,7 @@
 If you have questions, check the documentation at [kubespray.io](https://kubespray.io) and join us on the [kubernetes slack](https://kubernetes.slack.com), channel **\#kubespray**.
 You can get your invite [here](http://slack.k8s.io/)
 
-- Can be deployed on **[AWS](docs/cloud_providers/aws.md), GCE, [Azure](docs/cloud_providers/azure.md), [OpenStack](docs/cloud_providers/openstack.md), [vSphere](docs/cloud_providers/vsphere.md), [Equinix Metal](docs/cloud_providers/equinix-metal.md) (bare metal), Oracle Cloud Infrastructure (Experimental), or Baremetal**
+- Can be deployed on **[AWS](docs/aws.md), GCE, [Azure](docs/azure.md), [OpenStack](docs/openstack.md), [vSphere](docs/vsphere.md), [Packet](docs/packet.md) (bare metal), Oracle Cloud Infrastructure (Experimental), or Baremetal**
 - **Highly available** cluster
 - **Composable** (Choice of the network plugin for instance)
 - Supports most popular **Linux distributions**
@@ -13,16 +13,16 @@ You can get your invite [here](http://slack.k8s.io/)
 
 ## Quick Start
 
-Below are several ways to use Kubespray to deploy a Kubernetes cluster.
+To deploy the cluster you can use :
 
 ### Ansible
 
 #### Usage
 
-Install Ansible according to [Ansible installation guide](/docs/ansible/ansible.md#installing-ansible)
-then run the following steps:
-
 ```ShellSession
+# Install dependencies from ``requirements.txt``
+sudo pip3 install -r requirements.txt
+
 # Copy ``inventory/sample`` as ``inventory/mycluster``
 cp -rfp inventory/sample inventory/mycluster
 
@@ -32,14 +32,7 @@ CONFIG_FILE=inventory/mycluster/hosts.yaml python3 contrib/inventory_builder/inv
 
 # Review and change parameters under ``inventory/mycluster/group_vars``
 cat inventory/mycluster/group_vars/all/all.yml
-cat inventory/mycluster/group_vars/k8s_cluster/k8s-cluster.yml
+cat inventory/mycluster/group_vars/k8s-cluster/k8s-cluster.yml
-
-# Clean up old Kubernetes cluster with Ansible Playbook - run the playbook as root
-# The option `--become` is required, as for example cleaning up SSL keys in /etc/,
-# uninstalling old packages and interacting with various systemd daemons.
-# Without --become the playbook will fail to run!
-# And be mind it will remove the current kubernetes cluster (if it's running)!
-ansible-playbook -i inventory/mycluster/hosts.yaml  --become --become-user=root reset.yml
 
 # Deploy Kubespray with Ansible Playbook - run the playbook as root
 # The option `--become` is required, as for example writing SSL keys in /etc/,
@@ -48,172 +41,123 @@ ansible-playbook -i inventory/mycluster/hosts.yaml  --become --become-user=root
 ansible-playbook -i inventory/mycluster/hosts.yaml  --become --become-user=root cluster.yml
 ```
 
-Note: When Ansible is already installed via system packages on the control node,
+Note: When Ansible is already installed via system packages on the control machine, other python packages installed via `sudo pip install -r requirements.txt` will go to a different directory tree (e.g. `/usr/local/lib/python2.7/dist-packages` on Ubuntu) from Ansible's (e.g. `/usr/lib/python2.7/dist-packages/ansible` still on Ubuntu).
-Python packages installed via `sudo pip install -r requirements.txt` will go to
+As a consequence, `ansible-playbook` command will fail with:
-a different directory tree (e.g. `/usr/local/lib/python2.7/dist-packages` on
-Ubuntu) from Ansible's (e.g. `/usr/lib/python2.7/dist-packages/ansible` still on
-Ubuntu). As a consequence, the `ansible-playbook` command will fail with:
 
 ```raw
 ERROR! no action detected in task. This often indicates a misspelled module name, or incorrect module path.
 ```
 
-This likely indicates that a task depends on a module present in ``requirements.txt``.
+probably pointing on a task depending on a module present in requirements.txt (i.e. "unseal vault").
 
-One way of addressing this is to uninstall the system Ansible package then
+One way of solving this would be to uninstall the Ansible package and then, to install it via pip but it is not always possible.
-reinstall Ansible via ``pip``, but this not always possible and one must
+A workaround consists of setting `ANSIBLE_LIBRARY` and `ANSIBLE_MODULE_UTILS` environment variables respectively to the `ansible/modules` and `ansible/module_utils` subdirectories of pip packages installation location, which can be found in the Location field of the output of `pip show [package]` before executing `ansible-playbook`.
-take care regarding package versions.
-A workaround consists of setting the `ANSIBLE_LIBRARY`
-and `ANSIBLE_MODULE_UTILS` environment variables respectively to
-the `ansible/modules` and `ansible/module_utils` subdirectories of the ``pip``
-installation location, which is the ``Location`` shown by running
-`pip show [package]` before executing `ansible-playbook`.
-
-A simple way to ensure you get all the correct version of Ansible is to use
-the [pre-built docker image from Quay](https://quay.io/repository/kubespray/kubespray?tab=tags).
-You will then need to use [bind mounts](https://docs.docker.com/storage/bind-mounts/)
-to access the inventory and SSH key in the container, like this:
-
-```ShellSession
-git checkout v2.25.0
-docker pull quay.io/kubespray/kubespray:v2.25.0
-docker run --rm -it --mount type=bind,source="$(pwd)"/inventory/sample,dst=/inventory \
-  --mount type=bind,source="${HOME}"/.ssh/id_rsa,dst=/root/.ssh/id_rsa \
-  quay.io/kubespray/kubespray:v2.25.0 bash
-# Inside the container you may now run the kubespray playbooks:
-ansible-playbook -i /inventory/inventory.ini --private-key /root/.ssh/id_rsa cluster.yml
-```
-
-#### Collection
-
-See [here](docs/ansible/ansible_collection.md) if you wish to use this repository as an Ansible collection
 
 ### Vagrant
 
-For Vagrant we need to install Python dependencies for provisioning tasks.
+For Vagrant we need to install python dependencies for provisioning tasks.
-Check that ``Python`` and ``pip`` are installed:
+Check if Python and pip are installed:
 
 ```ShellSession
 python -V && pip -V
 ```
 
 If this returns the version of the software, you're good to go. If not, download and install Python from here <https://www.python.org/downloads/source/>
-
+Install the necessary requirements
-Install Ansible according to [Ansible installation guide](/docs/ansible/ansible.md#installing-ansible)
-then run the following step:
 
 ```ShellSession
+sudo pip install -r requirements.txt
 vagrant up
 ```
 
 ## Documents
 
 - [Requirements](#requirements)
-- [Kubespray vs ...](docs/getting_started/comparisons.md)
+- [Kubespray vs ...](docs/comparisons.md)
-- [Getting started](docs/getting_started/getting-started.md)
+- [Getting started](docs/getting-started.md)
-- [Setting up your first cluster](docs/getting_started/setting-up-your-first-cluster.md)
+- [Setting up your first cluster](docs/setting-up-your-first-cluster.md)
-- [Ansible inventory and tags](docs/ansible/ansible.md)
+- [Ansible inventory and tags](docs/ansible.md)
-- [Integration with existing ansible repo](docs/operations/integration.md)
+- [Integration with existing ansible repo](docs/integration.md)
-- [Deployment data variables](docs/ansible/vars.md)
+- [Deployment data variables](docs/vars.md)
-- [DNS stack](docs/advanced/dns-stack.md)
+- [DNS stack](docs/dns-stack.md)
-- [HA mode](docs/operations/ha-mode.md)
+- [HA mode](docs/ha-mode.md)
 - [Network plugins](#network-plugins)
-- [Vagrant install](docs/developers/vagrant.md)
+- [Vagrant install](docs/vagrant.md)
-- [Flatcar Container Linux bootstrap](docs/operating_systems/flatcar.md)
+- [Flatcar Container Linux bootstrap](docs/flatcar.md)
-- [Fedora CoreOS bootstrap](docs/operating_systems/fcos.md)
+- [Fedora CoreOS bootstrap](docs/fcos.md)
-- [openSUSE setup](docs/operating_systems/opensuse.md)
+- [Debian Jessie setup](docs/debian.md)
-- [Downloaded artifacts](docs/advanced/downloads.md)
+- [openSUSE setup](docs/opensuse.md)
-- [Cloud providers](docs/cloud_providers/cloud.md)
+- [Downloaded artifacts](docs/downloads.md)
-- [OpenStack](docs/cloud_providers/openstack.md)
+- [Cloud providers](docs/cloud.md)
-- [AWS](docs/cloud_providers/aws.md)
+- [OpenStack](docs/openstack.md)
-- [Azure](docs/cloud_providers/azure.md)
+- [AWS](docs/aws.md)
-- [vSphere](docs/cloud_providers/vsphere.md)
+- [Azure](docs/azure.md)
-- [Equinix Metal](docs/cloud_providers/equinix-metal.md)
+- [vSphere](docs/vsphere.md)
-- [Large deployments](docs/operations/large-deployments.md)
+- [Packet Host](docs/packet.md)
-- [Adding/replacing a node](docs/operations/nodes.md)
+- [Large deployments](docs/large-deployments.md)
-- [Upgrades basics](docs/operations/upgrades.md)
+- [Adding/replacing a node](docs/nodes.md)
-- [Air-Gap installation](docs/operations/offline-environment.md)
+- [Upgrades basics](docs/upgrades.md)
-- [NTP](docs/advanced/ntp.md)
+- [Air-Gap installation](docs/offline-environment.md)
-- [Hardening](docs/operations/hardening.md)
+- [Roadmap](docs/roadmap.md)
-- [Mirror](docs/operations/mirror.md)
-- [Roadmap](docs/roadmap/roadmap.md)
 
 ## Supported Linux Distributions
 
 - **Flatcar Container Linux by Kinvolk**
-- **Debian** Bookworm, Bullseye
+- **Debian** Buster, Jessie, Stretch, Wheezy
-- **Ubuntu** 20.04, 22.04, 24.04
+- **Ubuntu** 16.04, 18.04, 20.04
-- **CentOS/RHEL** 7, [8, 9](docs/operating_systems/centos.md#centos-8)
+- **CentOS/RHEL** 7, 8 (experimental: see [centos 8 notes](docs/centos8.md))
-- **Fedora** 37, 38
+- **Fedora** 31, 32
-- **Fedora CoreOS** (see [fcos Note](docs/operating_systems/fcos.md))
+- **Fedora CoreOS** (experimental: see [fcos Note](docs/fcos.md))
-- **openSUSE** Leap 15.x/Tumbleweed
+- **openSUSE** Leap 42.3/Tumbleweed
-- **Oracle Linux** 7, [8, 9](docs/operating_systems/centos.md#centos-8)
+- **Oracle Linux** 7, 8 (experimental: [centos 8 notes](docs/centos8.md) apply)
-- **Alma Linux** [8, 9](docs/operating_systems/centos.md#centos-8)
-- **Rocky Linux** [8, 9](docs/operating_systems/centos.md#centos-8)
-- **Kylin Linux Advanced Server V10** (experimental: see [kylin linux notes](docs/operating_systems/kylinlinux.md))
-- **Amazon Linux 2** (experimental: see [amazon linux notes](docs/operating_systems/amazonlinux.md))
-- **UOS Linux** (experimental: see [uos linux notes](docs/operating_systems/uoslinux.md))
-- **openEuler** (experimental: see [openEuler notes](docs/operating_systems/openeuler.md))
 
 Note: Upstart/SysV init based OS types are not supported.
 
 ## Supported Components
 
 - Core
-  - [kubernetes](https://github.com/kubernetes/kubernetes) v1.30.3
+  - [kubernetes](https://github.com/kubernetes/kubernetes) v1.18.10
-  - [etcd](https://github.com/etcd-io/etcd) v3.5.12
+  - [etcd](https://github.com/coreos/etcd) v3.4.3
-  - [docker](https://www.docker.com/) v26.1
+  - [docker](https://www.docker.com/) v19.03 (see note)
-  - [containerd](https://containerd.io/) v1.7.20
+  - [containerd](https://containerd.io/) v1.2.13
-  - [cri-o](http://cri-o.io/) v1.30.3 (experimental: see [CRI-O Note](docs/CRI/cri-o.md). Only on fedora, ubuntu and centos based OS)
+  - [cri-o](http://cri-o.io/) v1.17 (experimental: see [CRI-O Note](docs/cri-o.md). Only on fedora, ubuntu and centos based OS)
 - Network Plugin
-  - [cni-plugins](https://github.com/containernetworking/plugins) v1.2.0
+  - [cni-plugins](https://github.com/containernetworking/plugins) v0.8.6
-  - [calico](https://github.com/projectcalico/calico) v3.27.3
+  - [calico](https://github.com/projectcalico/calico) v3.15.2
-  - [cilium](https://github.com/cilium/cilium) v1.15.4
+  - [canal](https://github.com/projectcalico/canal) (given calico/flannel versions)
-  - [flannel](https://github.com/flannel-io/flannel) v0.22.0
+  - [cilium](https://github.com/cilium/cilium) v1.8.3
-  - [kube-ovn](https://github.com/alauda/kube-ovn) v1.11.5
+  - [contiv](https://github.com/contiv/install) v1.2.1
-  - [kube-router](https://github.com/cloudnativelabs/kube-router) v2.0.0
+  - [flanneld](https://github.com/coreos/flannel) v0.12.0
-  - [multus](https://github.com/k8snetworkplumbingwg/multus-cni) v3.8
+  - [kube-ovn](https://github.com/alauda/kube-ovn) v1.3.0
-  - [weave](https://github.com/rajch/weave) v2.8.7
+  - [kube-router](https://github.com/cloudnativelabs/kube-router) v1.0.1
-  - [kube-vip](https://github.com/kube-vip/kube-vip) v0.8.0
+  - [multus](https://github.com/intel/multus-cni) v3.6.0
+  - [ovn4nfv](https://github.com/opnfv/ovn4nfv-k8s-plugin) v1.1.0
+  - [weave](https://github.com/weaveworks/weave) v2.7.0
 - Application
-  - [cert-manager](https://github.com/jetstack/cert-manager) v1.14.7
+  - [ambassador](https://github.com/datawire/ambassador): v1.5
-  - [coredns](https://github.com/coredns/coredns) v1.11.1
-  - [ingress-nginx](https://github.com/kubernetes/ingress-nginx) v1.10.1
-  - [krew](https://github.com/kubernetes-sigs/krew) v0.4.4
-  - [argocd](https://argoproj.github.io/) v2.11.0
-  - [helm](https://helm.sh/) v3.14.2
-  - [metallb](https://metallb.universe.tf/)  v0.13.9
-  - [registry](https://github.com/distribution/distribution) v2.8.1
-- Storage Plugin
   - [cephfs-provisioner](https://github.com/kubernetes-incubator/external-storage) v2.1.0-k8s1.11
   - [rbd-provisioner](https://github.com/kubernetes-incubator/external-storage) v2.1.1-k8s1.11
-  - [aws-ebs-csi-plugin](https://github.com/kubernetes-sigs/aws-ebs-csi-driver) v0.5.0
+  - [cert-manager](https://github.com/jetstack/cert-manager) v0.16.1
-  - [azure-csi-plugin](https://github.com/kubernetes-sigs/azuredisk-csi-driver) v1.10.0
+  - [coredns](https://github.com/coredns/coredns) v1.6.7
-  - [cinder-csi-plugin](https://github.com/kubernetes/cloud-provider-openstack/blob/master/docs/cinder-csi-plugin/using-cinder-csi-plugin.md) v1.30.0
+  - [ingress-nginx](https://github.com/kubernetes/ingress-nginx) v0.35.0
-  - [gcp-pd-csi-plugin](https://github.com/kubernetes-sigs/gcp-compute-persistent-disk-csi-driver) v1.9.2
-  - [local-path-provisioner](https://github.com/rancher/local-path-provisioner) v0.0.24
-  - [local-volume-provisioner](https://github.com/kubernetes-sigs/sig-storage-local-static-provisioner) v2.5.0
-  - [node-feature-discovery](https://github.com/kubernetes-sigs/node-feature-discovery) v0.14.2
 
-## Container Runtime Notes
+Note: The list of validated [docker versions](https://kubernetes.io/docs/setup/production-environment/container-runtimes/#docker) is 1.13.1, 17.03, 17.06, 17.09, 18.06, 18.09 and 19.03. The recommended docker version is 19.03. The kubelet might break on docker's non-standard version numbering (it no longer uses semantic versioning). To ensure auto-updates don't break your cluster look into e.g. yum versionlock plugin or apt pin).
-
-- The cri-o version should be aligned with the respective kubernetes version (i.e. kube_version=1.20.x, crio_version=1.20)
 
 ## Requirements
 
-- **Minimum required version of Kubernetes is v1.28**
+- **Minimum required version of Kubernetes is v1.17**
-- **Ansible v2.14+, Jinja 2.11+ and python-netaddr is installed on the machine that will run Ansible commands**
+- **Ansible v2.9+, Jinja 2.11+ and python-netaddr is installed on the machine that will run Ansible commands**
-- The target servers must have **access to the Internet** in order to pull docker images. Otherwise, additional configuration is required (See [Offline Environment](docs/operations/offline-environment.md))
+- The target servers must have **access to the Internet** in order to pull docker images. Otherwise, additional configuration is required (See [Offline Environment](docs/offline-environment.md))
 - The target servers are configured to allow **IPv4 forwarding**.
-- If using IPv6 for pods and services, the target servers are configured to allow **IPv6 forwarding**.
+- **Your ssh key must be copied** to all the servers part of your inventory.
 - The **firewalls are not managed**, you'll need to implement your own rules the way you used to.
     in order to avoid any issue during deployment you should disable your firewall.
-- If kubespray is run from non-root user account, correct privilege escalation method
+- If kubespray is ran from non-root user account, correct privilege escalation method
     should be configured in the target servers. Then the `ansible_become` flag
     or command parameters `--become or -b` should be specified.
 
 Hardware:
-These limits are safeguarded by Kubespray. Actual requirements for your workload can differ. For a sizing guide go to the [Building Large Clusters](https://kubernetes.io/docs/setup/cluster-large/#size-of-master-and-master-components) guide.
+These limits are safe guarded by Kubespray. Actual requirements for your workload can differ. For a sizing guide go to the [Building Large Clusters](https://kubernetes.io/docs/setup/cluster-large/#size-of-master-and-master-components) guide.
 
 - Master
   - Memory: 1500 MB
@@ -222,43 +166,47 @@ These limits are safeguarded by Kubespray. Actual requirements for your workload
 
 ## Network Plugins
 
-You can choose among ten network plugins. (default: `calico`, except Vagrant uses `flannel`)
+You can choose between 10 network plugins. (default: `calico`, except Vagrant uses `flannel`)
 
-- [flannel](docs/CNI/flannel.md): gre/vxlan (layer 2) networking.
+- [flannel](docs/flannel.md): gre/vxlan (layer 2) networking.
 
-- [Calico](https://docs.tigera.io/calico/latest/about/) is a networking and network policy provider. Calico supports a flexible set of networking options
+- [Calico](https://docs.projectcalico.org/latest/introduction/) is a networking and network policy provider. Calico supports a flexible set of networking options
     designed to give you the most efficient networking across a range of situations, including non-overlay
     and overlay networks, with or without BGP. Calico uses the same engine to enforce network policy for hosts,
     pods, and (if using Istio and Envoy) applications at the service mesh layer.
 
+- [canal](https://github.com/projectcalico/canal): a composition of calico and flannel plugins.
+
 - [cilium](http://docs.cilium.io/en/latest/): layer 3/4 networking (as well as layer 7 to protect and secure application protocols), supports dynamic insertion of BPF bytecode into the Linux kernel to implement security services, networking and visibility logic.
 
-- [weave](docs/CNI/weave.md): Weave is a lightweight container overlay network that doesn't require an external K/V database cluster.
+- [contiv](docs/contiv.md): supports vlan, vxlan, bgp and Cisco SDN networking. This plugin is able to
+    apply firewall policies, segregate containers in multiple network and bridging pods onto physical networks.
+
+- [ovn4nfv](docs/ovn4nfv.md): [ovn4nfv-k8s-plugins](https://github.com/opnfv/ovn4nfv-k8s-plugin) is the network controller, OVS agent and CNI server to offer basic SFC and OVN overlay networking.
+
+- [weave](docs/weave.md): Weave is a lightweight container overlay network that doesn't require an external K/V database cluster.
     (Please refer to `weave` [troubleshooting documentation](https://www.weave.works/docs/net/latest/troubleshooting/)).
 
-- [kube-ovn](docs/CNI/kube-ovn.md): Kube-OVN integrates the OVN-based Network Virtualization with Kubernetes. It offers an advanced Container Network Fabric for Enterprises.
+- [kube-ovn](docs/kube-ovn.md): Kube-OVN integrates the OVN-based Network Virtualization with Kubernetes. It offers an advanced Container Network Fabric for Enterprises.
 
-- [kube-router](docs/CNI/kube-router.md): Kube-router is a L3 CNI for Kubernetes networking aiming to provide operational
+- [kube-router](docs/kube-router.md): Kube-router is a L3 CNI for Kubernetes networking aiming to provide operational
     simplicity and high performance: it uses IPVS to provide Kube Services Proxy (if setup to replace kube-proxy),
     iptables for network policies, and BGP for ods L3 networking (with optionally BGP peering with out-of-cluster BGP peers).
     It can also optionally advertise routes to Kubernetes cluster Pods CIDRs, ClusterIPs, ExternalIPs and LoadBalancerIPs.
 
-- [macvlan](docs/CNI/macvlan.md): Macvlan is a Linux network driver. Pods have their own unique Mac and Ip address, connected directly the physical (layer 2) network.
+- [macvlan](docs/macvlan.md): Macvlan is a Linux network driver. Pods have their own unique Mac and Ip address, connected directly the physical (layer 2) network.
 
-- [multus](docs/CNI/multus.md): Multus is a meta CNI plugin that provides multiple network interface support to pods. For each interface Multus delegates CNI calls to secondary CNI plugins such as Calico, macvlan, etc.
+- [multus](docs/multus.md): Multus is a meta CNI plugin that provides multiple network interface support to pods. For each interface Multus delegates CNI calls to secondary CNI plugins such as Calico, macvlan, etc.
 
-- [custom_cni](roles/network-plugin/custom_cni/) : You can specify some manifests that will be applied to the clusters to bring you own CNI and use non-supported ones by Kubespray.
+The choice is defined with the variable `kube_network_plugin`. There is also an
-  See `tests/files/custom_cni/README.md` and `tests/files/custom_cni/values.yaml`for an example with a CNI provided by a Helm Chart.
-
-The network plugin to use is defined by the variable `kube_network_plugin`. There is also an
 option to leverage built-in cloud provider networking instead.
-See also [Network checker](docs/advanced/netcheck.md).
+See also [Network checker](docs/netcheck.md).
 
 ## Ingress Plugins
 
-- [nginx](https://kubernetes.github.io/ingress-nginx): the NGINX Ingress Controller.
+- [ambassador](docs/ambassador.md): the Ambassador Ingress Controller and API gateway.
 
-- [metallb](docs/ingress/metallb.md): the MetalLB bare-metal service LoadBalancer provider.
+- [nginx](https://kubernetes.github.io/ingress-nginx): the NGINX Ingress Controller.
 
 ## Community docs and resources
 
@@ -271,12 +219,11 @@ See also [Network checker](docs/advanced/netcheck.md).
 
 - [Digital Rebar Provision](https://github.com/digitalrebar/provision/blob/v4/doc/integrations/ansible.rst)
 - [Terraform Contrib](https://github.com/kubernetes-sigs/kubespray/tree/master/contrib/terraform)
-- [Kubean](https://github.com/kubean-io/kubean)
 
 ## CI Tests
 
-[![Build graphs](https://gitlab.com/kargo-ci/kubernetes-sigs-kubespray/badges/master/pipeline.svg)](https://gitlab.com/kargo-ci/kubernetes-sigs-kubespray/-/pipelines)
+[![Build graphs](https://gitlab.com/kargo-ci/kubernetes-sigs-kubespray/badges/master/pipeline.svg)](https://gitlab.com/kargo-ci/kubernetes-sigs-kubespray/pipelines)
 
-CI/end-to-end tests sponsored by: [CNCF](https://cncf.io), [Equinix Metal](https://metal.equinix.com/), [OVHcloud](https://www.ovhcloud.com/), [ELASTX](https://elastx.se/).
+CI/end-to-end tests sponsored by: [CNCF](https://cncf.io), [Packet](https://www.packet.com/), [OVHcloud](https://www.ovhcloud.com/), [ELASTX](https://elastx.se/).
 
-See the [test matrix](docs/developers/test_cases.md) for details.
+See the [test matrix](docs/test_cases.md) for details.

RELEASE.md

@@ -2,21 +2,17 @@
 
 The Kubespray Project is released on an as-needed basis. The process is as follows:
 
-1. An issue is proposing a new release with a changelog since the last release. Please see [a good sample issue](https://github.com/kubernetes-sigs/kubespray/issues/8325)
+1. An issue is proposing a new release with a changelog since the last release
-1. At least one of the [approvers](OWNERS_ALIASES) must approve this release
+2. At least one of the [approvers](OWNERS_ALIASES) must approve this release
-1. (Only for major releases) The `kube_version_min_required` variable is set to `n-1`
+3. The `kube_version_min_required` variable is set to `n-1`
-1. (Only for major releases) Remove hashes for [EOL versions](https://github.com/kubernetes/website/blob/main/content/en/releases/patch-releases.md) of kubernetes from `*_checksums` variables.
+4. Remove hashes for [EOL versions](https://github.com/kubernetes/sig-release/blob/master/releases/patch-releases.md) of kubernetes from `*_checksums` variables.
-1. Create the release note with [Kubernetes Release Notes Generator](https://github.com/kubernetes/release/blob/master/cmd/release-notes/README.md). See the following `Release note creation` section for the details.
+5. An approver creates [new release in GitHub](https://github.com/kubernetes-sigs/kubespray/releases/new) using a version and tag name like `vX.Y.Z` and attaching the release notes
-1. An approver creates [new release in GitHub](https://github.com/kubernetes-sigs/kubespray/releases/new) using a version and tag name like `vX.Y.Z` and attaching the release notes
+6. An approver creates a release branch in the form `release-X.Y`
-1. (Only for major releases) An approver creates a release branch in the form `release-X.Y`
+7. The corresponding version of [quay.io/kubespray/kubespray:vX.Y.Z](https://quay.io/repository/kubespray/kubespray) and [quay.io/kubespray/vagrant:vX.Y.Z](https://quay.io/repository/kubespray/vagrant) docker images are built and tagged
-1. (For major releases) On the `master` branch: bump the version in `galaxy.yml` to the next expected major release (X.y.0 with y = Y + 1), make a Pull Request.
+8. The `KUBESPRAY_VERSION` variable is updated in `.gitlab-ci.yml`
-1. (For minor releases) On the `release-X.Y` branch: bump the version in `galaxy.yml` to the next expected minor release (X.Y.z with z = Z + 1), make a Pull Request.
+9. The release issue is closed
-1. The corresponding version of [quay.io/kubespray/kubespray:vX.Y.Z](https://quay.io/repository/kubespray/kubespray) and [quay.io/kubespray/vagrant:vX.Y.Z](https://quay.io/repository/kubespray/vagrant) container images are built and tagged. See the following `Container image creation` section for the details.
+10. An announcement email is sent to `kubernetes-dev@googlegroups.com` with the subject `[ANNOUNCE] Kubespray $VERSION is released`
-1. (Only for major releases) The `KUBESPRAY_VERSION` in `.gitlab-ci.yml` is upgraded to the version we just released # TODO clarify this, this variable is for testing upgrades.
+11. The topic of the #kubespray channel is updated with `vX.Y.Z is released! | ...`
-1. The release issue is closed
-1. An announcement email is sent to `dev@kubernetes.io` with the subject `[ANNOUNCE] Kubespray $VERSION is released`
-1. The topic of the #kubespray channel is updated with `vX.Y.Z is released! | ...`
-1. Create/Update Issue for upgradeing kubernetes and [k8s-conformance](https://github.com/cncf/k8s-conformance)
 
 ## Major/minor releases and milestones
 
@@ -50,37 +46,3 @@ The Kubespray Project is released on an as-needed basis. The process is as follo
   then Kubespray v2.1.0 may be bound to only minor changes to `kube_version`, like v1.5.1
   and *any* changes to other components, like etcd v4, or calico 1.2.3.
   And Kubespray v3.x.x shall be bound to `kube_version: 2.x.x` respectively.
-
-## Release note creation
-
-You can create a release note with:
-
-```shell
-export GITHUB_TOKEN=<your-github-token>
-export ORG=kubernetes-sigs
-export REPO=kubespray
-release-notes --start-sha <The start commit-id> --end-sha <The end commit-id> --dependencies=false --output=/tmp/kubespray-release-note --required-author=""
-```
-
-If the release note file(/tmp/kubespray-release-note) contains "### Uncategorized" pull requests, those pull requests don't have a valid kind label(`kind/feature`, etc.).
-It is necessary to put a valid label on each pull request and run the above release-notes command again to get a better release note
-
-## Container image creation
-
-The container image `quay.io/kubespray/kubespray:vX.Y.Z` can be created from Dockerfile of the kubespray root directory:
-
-```shell
-cd kubespray/
-nerdctl build -t quay.io/kubespray/kubespray:vX.Y.Z .
-nerdctl push quay.io/kubespray/kubespray:vX.Y.Z
-```
-
-The container image `quay.io/kubespray/vagrant:vX.Y.Z` can be created from build.sh of test-infra/vagrant-docker/:
-
-```shell
-cd kubespray/test-infra/vagrant-docker/
-./build vX.Y.Z
-```
-
-Please note that the above operation requires the permission to push container images into quay.io/kubespray/.
-If you don't have the permission, please ask it on the #kubespray-dev channel.

SECURITY_CONTACTS

@@ -9,7 +9,5 @@
 #
 # DO NOT REPORT SECURITY VULNERABILITIES DIRECTLY TO THESE NAMES, FOLLOW THE
 # INSTRUCTIONS AT https://kubernetes.io/security/
+atoms
 mattymo
-floryut
-oomichi
-cristicalin

Vagrantfile

@@ -1,7 +1,7 @@
 # -*- mode: ruby -*-
 # # vi: set ft=ruby :
 
-# For help on using kubespray with vagrant, check out docs/developers/vagrant.md
+# For help on using kubespray with vagrant, check out docs/vagrant.md
 
 require 'fileutils'
 
@@ -19,27 +19,19 @@ SUPPORTED_OS = {
   "flatcar-beta"        => {box: "flatcar-beta",               user: "core", box_url: FLATCAR_URL_TEMPLATE % ["beta"]},
   "flatcar-alpha"       => {box: "flatcar-alpha",              user: "core", box_url: FLATCAR_URL_TEMPLATE % ["alpha"]},
   "flatcar-edge"        => {box: "flatcar-edge",               user: "core", box_url: FLATCAR_URL_TEMPLATE % ["edge"]},
+  "ubuntu1604"          => {box: "generic/ubuntu1604",         user: "vagrant"},
+  "ubuntu1804"          => {box: "generic/ubuntu1804",         user: "vagrant"},
   "ubuntu2004"          => {box: "generic/ubuntu2004",         user: "vagrant"},
-  "ubuntu2204"          => {box: "generic/ubuntu2204",         user: "vagrant"},
-  "ubuntu2404"          => {box: "bento/ubuntu-24.04",         user: "vagrant"},
   "centos"              => {box: "centos/7",                   user: "vagrant"},
   "centos-bento"        => {box: "bento/centos-7.6",           user: "vagrant"},
   "centos8"             => {box: "centos/8",                   user: "vagrant"},
   "centos8-bento"       => {box: "bento/centos-8",             user: "vagrant"},
-  "almalinux8"          => {box: "almalinux/8",                user: "vagrant"},
+  "fedora31"            => {box: "fedora/31-cloud-base",       user: "vagrant"},
-  "almalinux8-bento"    => {box: "bento/almalinux-8",          user: "vagrant"},
+  "fedora32"            => {box: "fedora/32-cloud-base",       user: "vagrant"},
-  "rockylinux8"         => {box: "rockylinux/8",               user: "vagrant"},
+  "opensuse"            => {box: "bento/opensuse-leap-15.1",   user: "vagrant"},
-  "rockylinux9"         => {box: "rockylinux/9",               user: "vagrant"},
-  "fedora37"            => {box: "fedora/37-cloud-base",       user: "vagrant"},
-  "fedora38"            => {box: "fedora/38-cloud-base",       user: "vagrant"},
-  "opensuse"            => {box: "opensuse/Leap-15.4.x86_64",  user: "vagrant"},
   "opensuse-tumbleweed" => {box: "opensuse/Tumbleweed.x86_64", user: "vagrant"},
   "oraclelinux"         => {box: "generic/oracle7",            user: "vagrant"},
   "oraclelinux8"        => {box: "generic/oracle8",            user: "vagrant"},
-  "rhel7"               => {box: "generic/rhel7",              user: "vagrant"},
-  "rhel8"               => {box: "generic/rhel8",              user: "vagrant"},
-  "debian11"            => {box: "debian/bullseye64",          user: "vagrant"},
-  "debian12"            => {box: "debian/bookworm64",          user: "vagrant"},
 }
 
 if File.exist?(CONFIG)
@@ -55,17 +47,16 @@ $vm_cpus ||= 2
 $shared_folders ||= {}
 $forwarded_ports ||= {}
 $subnet ||= "172.18.8"
-$subnet_ipv6 ||= "fd3c:b398:0698:0756"
+$os ||= "ubuntu1804"
-$os ||= "ubuntu2004"
 $network_plugin ||= "flannel"
-# Setting multi_networking to true will install Multus: https://github.com/k8snetworkplumbingwg/multus-cni
+# Setting multi_networking to true will install Multus: https://github.com/intel/multus-cni
-$multi_networking ||= "False"
+$multi_networking ||= false
 $download_run_once ||= "True"
-$download_force_cache ||= "False"
+$download_force_cache ||= "True"
 # The first three nodes are etcd servers
-$etcd_instances ||= [$num_instances, 3].min
+$etcd_instances ||= $num_instances
 # The first two nodes are kube masters
-$kube_master_instances ||= [$num_instances, 2].min
+$kube_master_instances ||= $num_instances == 1 ? $num_instances : ($num_instances - 1)
 # All nodes are kube nodes
 $kube_node_instances ||= $num_instances
 # The following only works when using the libvirt provider
@@ -74,27 +65,14 @@ $kube_node_instances_with_disks_size ||= "20G"
 $kube_node_instances_with_disks_number ||= 2
 $override_disk_size ||= false
 $disk_size ||= "20GB"
-$local_path_provisioner_enabled ||= "False"
+$local_path_provisioner_enabled ||= false
 $local_path_provisioner_claim_root ||= "/opt/local-path-provisioner/"
 $libvirt_nested ||= false
-# boolean or string (e.g. "-vvv")
-$ansible_verbosity ||= false
-$ansible_tags ||= ENV['VAGRANT_ANSIBLE_TAGS'] || ""
-
-$vagrant_dir ||= File.join(File.dirname(__FILE__), ".vagrant")
 
 $playbook ||= "cluster.yml"
-$extra_vars ||= {}
 
 host_vars = {}
 
-# throw error if os is not supported
-if ! SUPPORTED_OS.key?($os)
-  puts "Unsupported OS: #{$os}"
-  puts "Supported OS are: #{SUPPORTED_OS.keys.join(', ')}"
-  exit 1
-end
-
 $box = SUPPORTED_OS[$os][:box]
 # if $inventory is not set, try to use example
 $inventory = "inventory/sample" if ! $inventory
@@ -103,18 +81,18 @@ $inventory = File.absolute_path($inventory, File.dirname(__FILE__))
 # if $inventory has a hosts.ini file use it, otherwise copy over
 # vars etc to where vagrant expects dynamic inventory to be
 if ! File.exist?(File.join(File.dirname($inventory), "hosts.ini"))
-  $vagrant_ansible = File.join(File.absolute_path($vagrant_dir), "provisioners", "ansible")
+  $vagrant_ansible = File.join(File.dirname(__FILE__), ".vagrant", "provisioners", "ansible")
   FileUtils.mkdir_p($vagrant_ansible) if ! File.exist?($vagrant_ansible)
-  $vagrant_inventory = File.join($vagrant_ansible,"inventory")
+  if ! File.exist?(File.join($vagrant_ansible,"inventory"))
-  FileUtils.rm_f($vagrant_inventory)
+    FileUtils.ln_s($inventory, File.join($vagrant_ansible,"inventory"))
-  FileUtils.ln_s($inventory, $vagrant_inventory)
+  end
 end
 
 if Vagrant.has_plugin?("vagrant-proxyconf")
-  $no_proxy = ENV['NO_PROXY'] || ENV['no_proxy'] || "127.0.0.1,localhost"
+    $no_proxy = ENV['NO_PROXY'] || ENV['no_proxy'] || "127.0.0.1,localhost"
-  (1..$num_instances).each do |i|
+    (1..$num_instances).each do |i|
-      $no_proxy += ",#{$subnet}.#{i+100}"
+        $no_proxy += ",#{$subnet}.#{i+100}"
-  end
+    end
 end
 
 Vagrant.configure("2") do |config|
@@ -164,7 +142,6 @@ Vagrant.configure("2") do |config|
         vb.gui = $vm_gui
         vb.linked_clone = true
         vb.customize ["modifyvm", :id, "--vram", "8"] # ubuntu defaults to 256 MB which is a waste of precious RAM
-        vb.customize ["modifyvm", :id, "--audio", "none"]
       end
 
       node.vm.provider :libvirt do |lv|
@@ -186,15 +163,7 @@ Vagrant.configure("2") do |config|
           # always make /dev/sd{a/b/c} so that CI can ensure that
           # virtualbox and libvirt will have the same devices to use for OSDs
           (1..$kube_node_instances_with_disks_number).each do |d|
-            lv.storage :file, :device => "hd#{driverletters[d]}", :path => "disk-#{i}-#{d}-#{DISK_UUID}.disk", :size => $kube_node_instances_with_disks_size, :bus => "scsi"
+            lv.storage :file, :device => "hd#{driverletters[d]}", :path => "disk-#{i}-#{d}-#{DISK_UUID}.disk", :size => $kube_node_instances_with_disks_size, :bus => "ide"
-          end
-        end
-        node.vm.provider :virtualbox do |vb|
-          # always make /dev/sd{a/b/c} so that CI can ensure that
-          # virtualbox and libvirt will have the same devices to use for OSDs
-          (1..$kube_node_instances_with_disks_number).each do |d|
-            vb.customize ['createhd', '--filename', "disk-#{i}-#{driverletters[d]}-#{DISK_UUID}.disk", '--size', $kube_node_instances_with_disks_size] # 10GB disk
-            vb.customize ['storageattach', :id, '--storagectl', 'SATA Controller', '--port', d, '--device', 0, '--type', 'hdd', '--medium', "disk-#{i}-#{driverletters[d]}-#{DISK_UUID}.disk", '--nonrotational', 'on', '--mtype', 'normal']
           end
         end
       end
@@ -207,55 +176,19 @@ Vagrant.configure("2") do |config|
         node.vm.network "forwarded_port", guest: guest, host: host, auto_correct: true
       end
 
-      if ["rhel7","rhel8"].include? $os
+      node.vm.synced_folder ".", "/vagrant", disabled: false, type: "rsync", rsync__args: ['--verbose', '--archive', '--delete', '-z'] , rsync__exclude: ['.git','venv']
-        # Vagrant synced_folder rsync options cannot be used for RHEL boxes as Rsync package cannot
+      $shared_folders.each do |src, dst|
-        # be installed until the host is registered with a valid Red Hat support subscription
+        node.vm.synced_folder src, dst, type: "rsync", rsync__args: ['--verbose', '--archive', '--delete', '-z']
-        node.vm.synced_folder ".", "/vagrant", disabled: false
-        $shared_folders.each do |src, dst|
-          node.vm.synced_folder src, dst
-        end
-      else
-        node.vm.synced_folder ".", "/vagrant", disabled: false, type: "rsync", rsync__args: ['--verbose', '--archive', '--delete', '-z'] , rsync__exclude: ['.git','venv']
-        $shared_folders.each do |src, dst|
-          node.vm.synced_folder src, dst, type: "rsync", rsync__args: ['--verbose', '--archive', '--delete', '-z']
-        end
       end
 
       ip = "#{$subnet}.#{i+100}"
-      node.vm.network :private_network,
+      node.vm.network :private_network, ip: ip
-        :ip => ip,
-        :libvirt__guest_ipv6 => 'yes',
-        :libvirt__ipv6_address => "#{$subnet_ipv6}::#{i+100}",
-        :libvirt__ipv6_prefix => "64",
-        :libvirt__forward_mode => "none",
-        :libvirt__dhcp_enabled => false
 
       # Disable swap for each vm
       node.vm.provision "shell", inline: "swapoff -a"
 
-      # ubuntu2004 and ubuntu2204 have IPv6 explicitly disabled. This undoes that.
+      # Disable firewalld on oraclelinux vms
-      if ["ubuntu2004", "ubuntu2204"].include? $os
+      if ["oraclelinux","oraclelinux8"].include? $os
-        node.vm.provision "shell", inline: "rm -f /etc/modprobe.d/local.conf"
-        node.vm.provision "shell", inline: "sed -i '/net.ipv6.conf.all.disable_ipv6/d' /etc/sysctl.d/99-sysctl.conf /etc/sysctl.conf"
-      end
-      # Hack for fedora37/38 to get the IP address of the second interface
-      if ["fedora37", "fedora38"].include? $os
-        config.vm.provision "shell", inline: <<-SHELL
-          nmcli conn modify 'Wired connection 2' ipv4.addresses $(cat /etc/sysconfig/network-scripts/ifcfg-eth1 | grep IPADDR | cut -d "=" -f2)
-          nmcli conn modify 'Wired connection 2' ipv4.method manual
-          service NetworkManager restart
-        SHELL
-      end
-
-      # Rockylinux boxes needs UEFI
-      if ["rockylinux8", "rockylinux9"].include? $os
-        config.vm.provider "libvirt" do |domain|
-          domain.loader = "/usr/share/OVMF/x64/OVMF_CODE.fd"
-        end
-      end
-
-      # Disable firewalld on oraclelinux/redhat vms
-      if ["oraclelinux","oraclelinux8","rhel7","rhel8","rockylinux8"].include? $os
         node.vm.provision "shell", inline: "systemctl stop firewalld; systemctl disable firewalld"
       end
 
@@ -277,18 +210,13 @@ Vagrant.configure("2") do |config|
         "kubectl_localhost": "True",
         "local_path_provisioner_enabled": "#{$local_path_provisioner_enabled}",
         "local_path_provisioner_claim_root": "#{$local_path_provisioner_claim_root}",
-        "ansible_ssh_user": SUPPORTED_OS[$os][:user],
+        "ansible_ssh_user": SUPPORTED_OS[$os][:user]
-        "ansible_ssh_private_key_file": File.join(Dir.home, ".vagrant.d", "insecure_private_key"),
-        "unsafe_show_logs": "True"
       }
 
       # Only execute the Ansible provisioner once, when all the machines are up and ready.
-      # And limit the action to gathering facts, the full playbook is going to be ran by testcases_run.sh
       if i == $num_instances
         node.vm.provision "ansible" do |ansible|
           ansible.playbook = $playbook
-          ansible.compatibility_mode = "2.0"
-          ansible.verbose = $ansible_verbosity
           $ansible_inventory_path = File.join( $inventory, "hosts.ini")
           if File.exist?($ansible_inventory_path)
             ansible.inventory_path = $ansible_inventory_path
@@ -298,15 +226,12 @@ Vagrant.configure("2") do |config|
           ansible.host_key_checking = false
           ansible.raw_arguments = ["--forks=#{$num_instances}", "--flush-cache", "-e ansible_become_pass=vagrant"]
           ansible.host_vars = host_vars
-          ansible.extra_vars = $extra_vars
+          #ansible.tags = ['download']
-          if $ansible_tags != ""
-            ansible.tags = [$ansible_tags]
-          end
           ansible.groups = {
             "etcd" => ["#{$instance_name_prefix}-[1:#{$etcd_instances}]"],
-            "kube_control_plane" => ["#{$instance_name_prefix}-[1:#{$kube_master_instances}]"],
+            "kube-master" => ["#{$instance_name_prefix}-[1:#{$kube_master_instances}]"],
-            "kube_node" => ["#{$instance_name_prefix}-[1:#{$kube_node_instances}]"],
+            "kube-node" => ["#{$instance_name_prefix}-[1:#{$kube_node_instances}]"],
-            "k8s_cluster:children" => ["kube_control_plane", "kube_node"],
+            "k8s-cluster:children" => ["kube-master", "kube-node"],
           }
         end
       end

ansible.cfg

@@ -3,6 +3,7 @@ pipelining=True
 ssh_args = -o ControlMaster=auto -o ControlPersist=30m -o ConnectionAttempts=100 -o UserKnownHostsFile=/dev/null
 #control_path = ~/.ssh/ansible-%%r@%%h:%%p
 [defaults]
+strategy_plugins = plugins/mitogen/ansible_mitogen/plugins/strategy
 # https://github.com/ansible/ansible/issues/56930 (to ignore group names with - and .)
 force_valid_group_names = ignore
 
@@ -10,12 +11,11 @@ host_key_checking=False
 gathering = smart
 fact_caching = jsonfile
 fact_caching_connection = /tmp
-fact_caching_timeout = 86400
+fact_caching_timeout = 7200
-timeout = 300
 stdout_callback = default
 display_skipped_hosts = no
 library = ./library
-callbacks_enabled = profile_tasks,ara_default
+callback_whitelist = profile_tasks
 roles_path = roles:$VIRTUAL_ENV/usr/local/share/kubespray/roles:$VIRTUAL_ENV/usr/local/share/ansible/roles:/usr/share/kubespray/roles
 deprecation_warnings=False
 inventory_ignore_extensions = ~, .orig, .bak, .ini, .cfg, .retry, .pyc, .pyo, .creds, .gpg

ansible_version.yml

@@ -0,0 +1,15 @@
+---
+- hosts: localhost
+  gather_facts: false
+  become: no
+  vars:
+    minimal_ansible_version: 2.8.0
+    ansible_connection: local
+  tasks:
+    - name: "Check ansible version >={{ minimal_ansible_version }}"
+      assert:
+        msg: "Ansible must be {{ minimal_ansible_version }} or higher"
+        that:
+          - ansible_version.string is version(minimal_ansible_version, ">=")
+      tags:
+        - check

cluster.yml

@@ -1,3 +1,137 @@
 ---
-- name: Install Kubernetes
+- name: Check ansible version
-  ansible.builtin.import_playbook: playbooks/cluster.yml
+  import_playbook: ansible_version.yml
+
+- hosts: all
+  gather_facts: false
+  tags: always
+  tasks:
+    - name: "Set up proxy environment"
+      set_fact:
+        proxy_env:
+          http_proxy: "{{ http_proxy | default ('') }}"
+          HTTP_PROXY: "{{ http_proxy | default ('') }}"
+          https_proxy: "{{ https_proxy | default ('') }}"
+          HTTPS_PROXY: "{{ https_proxy | default ('') }}"
+          no_proxy: "{{ no_proxy | default ('') }}"
+          NO_PROXY: "{{ no_proxy | default ('') }}"
+      no_log: true
+
+- hosts: bastion[0]
+  gather_facts: False
+  roles:
+    - { role: kubespray-defaults }
+    - { role: bastion-ssh-config, tags: ["localhost", "bastion"] }
+
+- hosts: k8s-cluster:etcd
+  strategy: linear
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  gather_facts: false
+  roles:
+    - { role: kubespray-defaults }
+    - { role: bootstrap-os, tags: bootstrap-os}
+
+- name: Gather facts
+  tags: always
+  import_playbook: facts.yml
+
+- hosts: k8s-cluster:etcd
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes/preinstall, tags: preinstall }
+    - { role: "container-engine", tags: "container-engine", when: deploy_container_engine|default(true) }
+    - { role: download, tags: download, when: "not skip_downloads" }
+  environment: "{{ proxy_env }}"
+
+- hosts: etcd
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - role: etcd
+      tags: etcd
+      vars:
+        etcd_cluster_setup: true
+        etcd_events_cluster_setup: "{{ etcd_events_cluster_enabled }}"
+      when: not etcd_kubeadm_enabled| default(false)
+
+- hosts: k8s-cluster
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - role: etcd
+      tags: etcd
+      vars:
+        etcd_cluster_setup: false
+        etcd_events_cluster_setup: false
+      when: not etcd_kubeadm_enabled| default(false)
+
+- hosts: k8s-cluster
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes/node, tags: node }
+  environment: "{{ proxy_env }}"
+
+- hosts: kube-master
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes/master, tags: master }
+    - { role: kubernetes/client, tags: client }
+    - { role: kubernetes-apps/cluster_roles, tags: cluster-roles }
+
+- hosts: k8s-cluster
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes/kubeadm, tags: kubeadm}
+    - { role: network_plugin, tags: network }
+    - { role: kubernetes/node-label, tags: node-label }
+
+- hosts: calico-rr
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: network_plugin/calico/rr, tags: ['network', 'calico_rr'] }
+
+- hosts: kube-master[0]
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes-apps/rotate_tokens, tags: rotate_tokens, when: "secret_changed|default(false)" }
+    - { role: win_nodes/kubernetes_patch, tags: ["master", "win_nodes"] }
+
+- hosts: kube-master
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes-apps/external_cloud_controller, tags: external-cloud-controller }
+    - { role: kubernetes-apps/network_plugin, tags: network }
+    - { role: kubernetes-apps/policy_controller, tags: policy-controller }
+    - { role: kubernetes-apps/ingress_controller, tags: ingress-controller }
+    - { role: kubernetes-apps/external_provisioner, tags: external-provisioner }
+
+- hosts: kube-master
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes-apps, tags: apps }
+  environment: "{{ proxy_env }}"
+
+- hosts: k8s-cluster
+  gather_facts: False
+  any_errors_fatal: "{{ any_errors_fatal | default(true) }}"
+  roles:
+    - { role: kubespray-defaults }
+    - { role: kubernetes/preinstall, when: "dns_mode != 'none' and resolvconf_mode == 'host_resolvconf'", tags: resolvconf, dns_late: true }

contrib/aws_inventory/kubespray-aws-inventory.py

@@ -35,11 +35,11 @@ class SearchEC2Tags(object):
     hosts['_meta'] = { 'hostvars': {} }
 
     ##Search ec2 three times to find nodes of each group type. Relies on kubespray-role key/value.
-    for group in ["kube_control_plane", "kube_node", "etcd"]:
+    for group in ["kube-master", "kube-node", "etcd"]:
       hosts[group] = []
       tag_key = "kubespray-role"
       tag_value = ["*"+group+"*"]
-      region = os.environ['AWS_REGION']
+      region = os.environ['REGION']
 
       ec2 = boto3.resource('ec2', region)
       filters = [{'Name': 'tag:'+tag_key, 'Values': tag_value}, {'Name': 'instance-state-name', 'Values': ['running']}]
@@ -67,15 +67,10 @@ class SearchEC2Tags(object):
         if node_labels_tag:
           ansible_host['node_labels'] = dict([ label.strip().split('=') for label in node_labels_tag[0]['Value'].split(',') ])
 
-        ##Set when instance actually has node_taints
-        node_taints_tag = list(filter(lambda t: t['Key'] == 'kubespray-node-taints', instance.tags))
-        if node_taints_tag:
-          ansible_host['node_taints'] = list([ taint.strip() for taint in node_taints_tag[0]['Value'].split(',') ])
-
         hosts[group].append(dns_name)
         hosts['_meta']['hostvars'][dns_name] = ansible_host
-
+        
-    hosts['k8s_cluster'] = {'children':['kube_control_plane', 'kube_node']}
+    hosts['k8s-cluster'] = {'children':['kube-master', 'kube-node']}
     print(json.dumps(hosts, sort_keys=True, indent=2))
 
 SearchEC2Tags()

contrib/aws_inventory/requirements.txt

@@ -1 +0,0 @@
-boto3  # Apache-2.0

contrib/azurerm/.gitignore

@@ -1,2 +1,2 @@
 .generated
-/inventory
+/inventory

contrib/azurerm/README.md

@@ -24,14 +24,14 @@ experience.
 
 You can enable the use of a Bastion Host by changing **use_bastion** in group_vars/all to **true**. The generated
 templates will then include an additional bastion VM which can then be used to connect to the masters and nodes. The option
-also removes all public IPs from all other VMs.
+also removes all public IPs from all other VMs. 
 
 ## Generating and applying
 
 To generate and apply the templates, call:
 
 ```shell
-./apply-rg.sh <resource_group_name>
+$ ./apply-rg.sh <resource_group_name>
 ```
 
 If you change something in the configuration (e.g. number of nodes) later, you can call this again and Azure will
@@ -42,26 +42,25 @@ take care about creating/modifying whatever is needed.
 If you need to delete all resources from a resource group, simply call:
 
 ```shell
-./clear-rg.sh <resource_group_name>
+$ ./clear-rg.sh <resource_group_name>
 ```
 
 **WARNING** this really deletes everything from your resource group, including everything that was later created by you!
 
-## Installing Ansible and the dependencies
-
-Install Ansible according to [Ansible installation guide](/docs/ansible/ansible.md#installing-ansible)
 
 ## Generating an inventory for kubespray
 
 After you have applied the templates, you can generate an inventory with this call:
 
 ```shell
-./generate-inventory.sh <resource_group_name>
+$ ./generate-inventory.sh <resource_group_name>
 ```
 
 It will create the file ./inventory which can then be used with kubespray, e.g.:
 
 ```shell
-cd kubespray-root-dir
+$ cd kubespray-root-dir
-ansible-playbook -i contrib/azurerm/inventory -u devops --become -e "@inventory/sample/group_vars/all/all.yml" cluster.yml
+$ sudo pip3 install -r requirements.txt
+$ ansible-playbook -i contrib/azurerm/inventory -u devops --become -e "@inventory/sample/group_vars/all/all.yml" cluster.yml
 ```
+

contrib/azurerm/generate-inventory.yml

@@ -1,6 +1,5 @@
 ---
-- name: Generate Azure inventory
+- hosts: localhost
-  hosts: localhost
   gather_facts: False
   roles:
     - generate-inventory

contrib/azurerm/generate-inventory_2.yml

@@ -1,6 +1,5 @@
 ---
-- name: Generate Azure inventory
+- hosts: localhost
-  hosts: localhost
   gather_facts: False
   roles:
     - generate-inventory_2

contrib/azurerm/generate-templates.yml

@@ -1,6 +1,5 @@
 ---
-- name: Generate Azure templates
+- hosts: localhost
-  hosts: localhost
   gather_facts: False
   roles:
     - generate-templates

contrib/azurerm/roles/generate-inventory/tasks/main.yml

@@ -1,6 +1,6 @@
 ---
 
-- name: Query Azure VMs
+- name: Query Azure VMs  # noqa 301
   command: azure vm list-ip-address --json {{ azure_resource_group }}
   register: vm_list_cmd
 
@@ -12,4 +12,3 @@
   template:
     src: inventory.j2
     dest: "{{ playbook_dir }}/inventory"
-    mode: "0644"

contrib/azurerm/roles/generate-inventory/templates/inventory.j2

@@ -7,9 +7,9 @@
 {% endif %}
 {% endfor %}
 
-[kube_control_plane]
+[kube-master]
 {% for vm in vm_list %}
-{% if 'kube_control_plane' in vm.tags.roles %}
+{% if 'kube-master' in vm.tags.roles %}
 {{ vm.name }}
 {% endif %}
 {% endfor %}
@@ -21,13 +21,13 @@
 {% endif %}
 {% endfor %}
 
-[kube_node]
+[kube-node]
 {% for vm in vm_list %}
-{% if 'kube_node' in vm.tags.roles %}
+{% if 'kube-node' in vm.tags.roles %}
 {{ vm.name }}
 {% endif %}
 {% endfor %}
 
-[k8s_cluster:children]
+[k8s-cluster:children]
-kube_node
+kube-node
-kube_control_plane
+kube-master

contrib/azurerm/roles/generate-inventory_2/tasks/main.yml

@@ -1,14 +1,14 @@
 ---
 
-- name: Query Azure VMs IPs
+- name: Query Azure VMs IPs  # noqa 301
   command: az vm list-ip-addresses -o json --resource-group {{ azure_resource_group }}
   register: vm_ip_list_cmd
 
-- name: Query Azure VMs Roles
+- name: Query Azure VMs Roles  # noqa 301
   command: az vm list -o json --resource-group {{ azure_resource_group }}
   register: vm_list_cmd
 
-- name: Query Azure Load Balancer Public IP
+- name: Query Azure Load Balancer Public IP  # noqa 301
   command: az network public-ip show -o json -g {{ azure_resource_group }} -n kubernetes-api-pubip
   register: lb_pubip_cmd
 
@@ -22,10 +22,8 @@
   template:
     src: inventory.j2
     dest: "{{ playbook_dir }}/inventory"
-    mode: "0644"
 
 - name: Generate Load Balancer variables
   template:
     src: loadbalancer_vars.j2
     dest: "{{ playbook_dir }}/loadbalancer_vars.yml"
-    mode: "0644"

contrib/azurerm/roles/generate-inventory_2/templates/inventory.j2

@@ -7,9 +7,9 @@
 {% endif %}
 {% endfor %}
 
-[kube_control_plane]
+[kube-master]
 {% for vm in vm_roles_list %}
-{% if 'kube_control_plane' in vm.tags.roles %}
+{% if 'kube-master' in vm.tags.roles %}
 {{ vm.name }}
 {% endif %}
 {% endfor %}
@@ -21,13 +21,14 @@
 {% endif %}
 {% endfor %}
 
-[kube_node]
+[kube-node]
 {% for vm in vm_roles_list %}
-{% if 'kube_node' in vm.tags.roles %}
+{% if 'kube-node' in vm.tags.roles %}
 {{ vm.name }}
 {% endif %}
 {% endfor %}
 
-[k8s_cluster:children]
+[k8s-cluster:children]
-kube_node
+kube-node
-kube_control_plane
+kube-master
+

contrib/azurerm/roles/generate-templates/defaults/main.yml

@@ -24,14 +24,14 @@ bastionIPAddressName: bastion-pubip
 
 disablePasswordAuthentication: true
 
-sshKeyPath: "/home/{{ admin_username }}/.ssh/authorized_keys"
+sshKeyPath: "/home/{{admin_username}}/.ssh/authorized_keys"
 
 imageReference:
   publisher: "OpenLogic"
   offer: "CentOS"
   sku: "7.5"
   version: "latest"
-imageReferenceJson: "{{ imageReference | to_json }}"
+imageReferenceJson: "{{imageReference|to_json}}"
 
-storageAccountName: "sa{{ nameSuffix | replace('-', '') }}"
+storageAccountName: "sa{{nameSuffix | replace('-', '')}}"
 storageAccountType: "{{ azure_storage_account_type | default('Standard_LRS') }}"

contrib/azurerm/roles/generate-templates/tasks/main.yml

@@ -8,13 +8,11 @@
     path: "{{ base_dir }}"
     state: directory
     recurse: true
-    mode: "0755"
 
 - name: Store json files in base_dir
   template:
     src: "{{ item }}"
     dest: "{{ base_dir }}/{{ item }}"
-    mode: "0644"
   with_items:
     - network.json
     - storage.json

contrib/azurerm/roles/generate-templates/templates/availability-sets.json

@@ -27,4 +27,4 @@
       }
     }
   ]
-}
+}

contrib/azurerm/roles/generate-templates/templates/bastion.json

@@ -103,4 +103,4 @@
     }
     {% endif %}
   ]
-}
+}

contrib/azurerm/roles/generate-templates/templates/clear-rg.json

@@ -5,4 +5,4 @@
   "variables": {},
   "resources": [],
   "outputs": {}
-}
+}

contrib/azurerm/roles/generate-templates/templates/masters.json

@@ -144,7 +144,7 @@
         "[concat('Microsoft.Network/networkInterfaces/', 'master-{{i}}-nic')]"
       ],
       "tags": {
-        "roles": "kube_control_plane,etcd"
+        "roles": "kube-master,etcd"
       },
       "apiVersion": "{{apiVersion}}",
       "properties": {

contrib/azurerm/roles/generate-templates/templates/minions.json

@@ -61,7 +61,7 @@
         "[concat('Microsoft.Network/networkInterfaces/', 'minion-{{i}}-nic')]"
       ],
       "tags": {
-        "roles": "kube_node"
+        "roles": "kube-node"
       },
       "apiVersion": "{{apiVersion}}",
       "properties": {
@@ -112,4 +112,4 @@
     } {% if not loop.last %},{% endif %}
     {% endfor %}
   ]
-}
+}

contrib/azurerm/roles/generate-templates/templates/storage.json

@@ -16,4 +16,4 @@
       }
     }
   ]
-}
+}

contrib/dind/README.md

@@ -6,7 +6,6 @@ to serve as Kubernetes "nodes", which in turn will run
 called DIND (Docker-IN-Docker).
 
 The playbook has two roles:
-
 - dind-host: creates the "nodes" as containers in localhost, with
   appropriate settings for DIND (privileged, volume mapping for dind
   storage, etc).
@@ -28,7 +27,7 @@ See below for a complete successful run:
 
 1. Create the node containers
 
-```shell
+~~~~
 # From the kubespray root dir
 cd contrib/dind
 pip install -r requirements.txt
@@ -37,15 +36,15 @@ ansible-playbook -i hosts dind-cluster.yaml
 
 # Back to kubespray root
 cd ../..
-```
+~~~~
 
 NOTE: if the playbook run fails with something like below error
 message, you may need to specifically set `ansible_python_interpreter`,
 see `./hosts` file for an example expanded localhost entry.
 
-```shell
+~~~
 failed: [localhost] (item=kube-node1) => {"changed": false, "item": "kube-node1", "msg": "Failed to import docker or docker-py - No module named requests.exceptions. Try `pip install docker` or `pip install docker-py` (Python 2.6)"}
-```
+~~~
 
 2. Customize kubespray-dind.yaml
 
@@ -53,33 +52,33 @@ Note that there's coupling between above created node containers
 and `kubespray-dind.yaml` settings, in particular regarding selected `node_distro`
 (as set in `group_vars/all/all.yaml`), and docker settings.
 
-```shell
+~~~
 $EDITOR contrib/dind/kubespray-dind.yaml
-```
+~~~
 
 3. Prepare the inventory and run the playbook
 
-```shell
+~~~
 INVENTORY_DIR=inventory/local-dind
 mkdir -p ${INVENTORY_DIR}
 rm -f ${INVENTORY_DIR}/hosts.ini
 CONFIG_FILE=${INVENTORY_DIR}/hosts.ini /tmp/kubespray.dind.inventory_builder.sh
 
 ansible-playbook --become -e ansible_ssh_user=debian -i ${INVENTORY_DIR}/hosts.ini cluster.yml --extra-vars @contrib/dind/kubespray-dind.yaml
-```
+~~~
 
 NOTE: You could also test other distros without editing files by
 passing `--extra-vars` as per below commandline,
 replacing `DISTRO` by either `debian`, `ubuntu`, `centos`, `fedora`:
 
-```shell
+~~~
 cd contrib/dind
 ansible-playbook -i hosts dind-cluster.yaml --extra-vars node_distro=DISTRO
 
 cd ../..
 CONFIG_FILE=inventory/local-dind/hosts.ini /tmp/kubespray.dind.inventory_builder.sh
 ansible-playbook --become -e ansible_ssh_user=DISTRO -i inventory/local-dind/hosts.ini cluster.yml --extra-vars @contrib/dind/kubespray-dind.yaml --extra-vars bootstrap_os=DISTRO
-```
+~~~
 
 ## Resulting deployment
 
@@ -90,7 +89,7 @@ from the host where you ran kubespray playbooks.
 
 Running from an Ubuntu Xenial host:
 
-```shell
+~~~
 $ uname -a
 Linux ip-xx-xx-xx-xx 4.4.0-1069-aws #79-Ubuntu SMP Mon Sep 24
 15:01:41 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
@@ -150,14 +149,14 @@ kube-system   weave-net-xr46t                         2/2     Running   0
 
 $ docker exec kube-node1 curl -s http://localhost:31081/api/v1/connectivity_check
 {"Message":"All 10 pods successfully reported back to the server","Absent":null,"Outdated":null}
-```
+~~~
 
 ## Using ./run-test-distros.sh
 
 You can use `./run-test-distros.sh` to run a set of tests via DIND,
 and excerpt from this script, to get an idea:
 
-```shell
+~~~
 # The SPEC file(s) must have two arrays as e.g.
 # DISTROS=(debian centos)
 # EXTRAS=(
@@ -170,7 +169,7 @@ and excerpt from this script, to get an idea:
 #
 # Each $EXTRAS element will be whitespace split, and passed as --extra-vars
 # to main kubespray ansible-playbook run.
-```
+~~~
 
 See e.g. `test-some_distros-most_CNIs.env` and
 `test-some_distros-kube_router_combo.env` in particular for a richer

contrib/dind/dind-cluster.yaml

@@ -1,11 +1,9 @@
 ---
-- name: Create nodes as docker containers
+- hosts: localhost
-  hosts: localhost
   gather_facts: False
   roles:
     - { role: dind-host }
 
-- name: Customize each node containers
+- hosts: containers
-  hosts: containers
   roles:
     - { role: dind-cluster }

contrib/dind/roles/dind-cluster/tasks/main.yaml

@@ -1,9 +1,9 @@
 ---
-- name: Set_fact distro_setup
+- name: set_fact distro_setup
   set_fact:
     distro_setup: "{{ distro_settings[node_distro] }}"
 
-- name: Set_fact other distro settings
+- name: set_fact other distro settings
   set_fact:
     distro_user: "{{ distro_setup['user'] }}"
     distro_ssh_service: "{{ distro_setup['ssh_service'] }}"
@@ -35,7 +35,6 @@
       path-exclude=/usr/share/doc/*
       path-include=/usr/share/doc/*/copyright
     dest: /etc/dpkg/dpkg.cfg.d/01_nodoc
-    mode: "0644"
   when:
     - ansible_os_family == 'Debian'
 
@@ -43,7 +42,7 @@
   package:
     name: "{{ item }}"
     state: present
-  with_items: "{{ distro_extra_packages + ['rsyslog', 'openssh-server'] }}"
+  with_items: "{{ distro_extra_packages }} + [ 'rsyslog', 'openssh-server' ]"
 
 - name: Start needed services
   service:
@@ -64,10 +63,9 @@
   copy:
     content: "{{ distro_user }} ALL=(ALL) NOPASSWD:ALL"
     dest: "/etc/sudoers.d/{{ distro_user }}"
-    mode: "0640"
 
-- name: "Add my pubkey to {{ distro_user }} user authorized keys"
+- name: Add my pubkey to "{{ distro_user }}" user authorized keys
-  ansible.posix.authorized_key:
+  authorized_key:
     user: "{{ distro_user }}"
     state: present
-    key: "{{ lookup('file', lookup('env', 'HOME') + '/.ssh/id_rsa.pub') }}"
+    key: "{{ lookup('file', lookup('env','HOME') + '/.ssh/id_rsa.pub') }}"

contrib/dind/roles/dind-host/tasks/main.yaml

@@ -1,9 +1,9 @@
 ---
-- name: Set_fact distro_setup
+- name: set_fact distro_setup
   set_fact:
     distro_setup: "{{ distro_settings[node_distro] }}"
 
-- name: Set_fact other distro settings
+- name: set_fact other distro settings
   set_fact:
     distro_image: "{{ distro_setup['image'] }}"
     distro_init: "{{ distro_setup['init'] }}"
@@ -13,7 +13,7 @@
     distro_agetty_svc: "{{ distro_setup['agetty_svc'] }}"
 
 - name: Create dind node containers from "containers" inventory section
-  community.docker.docker_container:
+  docker_container:
     image: "{{ distro_image }}"
     name: "{{ item }}"
     state: started
@@ -42,7 +42,7 @@
   template:
     src: inventory_builder.sh.j2
     dest: /tmp/kubespray.dind.inventory_builder.sh
-    mode: "0755"
+    mode: 0755
   tags:
     - addresses
 
@@ -53,7 +53,7 @@
     {{ distro_raw_setup_done }}  && echo SKIPPED && exit 0
     until [ "$(readlink /proc/1/exe)" = "{{ distro_pid1_exe }}" ] ; do sleep 1; done
     {{ distro_raw_setup }}
-  delegate_to: "{{ item._ansible_item_label | default(item.item) }}"
+  delegate_to: "{{ item._ansible_item_label|default(item.item) }}"
   with_items: "{{ containers.results }}"
   register: result
   changed_when: result.stdout.find("SKIPPED") < 0
@@ -63,25 +63,26 @@
     until test -S /var/run/dbus/system_bus_socket; do sleep 1; done
     systemctl disable {{ distro_agetty_svc }}
     systemctl stop {{ distro_agetty_svc }}
-  delegate_to: "{{ item._ansible_item_label | default(item.item) }}"
+  delegate_to: "{{ item._ansible_item_label|default(item.item) }}"
   with_items: "{{ containers.results }}"
   changed_when: false
 
 # Running systemd-machine-id-setup doesn't create a unique id for each node container on Debian,
 # handle manually
-- name: Re-create unique machine-id (as we may just get what comes in the docker image), needed by some CNIs for mac address seeding (notably weave)
+- name: Re-create unique machine-id (as we may just get what comes in the docker image), needed by some CNIs for mac address seeding (notably weave)  # noqa 301
   raw: |
     echo {{ item | hash('sha1') }} > /etc/machine-id.new
     mv -b /etc/machine-id.new /etc/machine-id
     cmp /etc/machine-id /etc/machine-id~ || true
     systemctl daemon-reload
-  delegate_to: "{{ item._ansible_item_label | default(item.item) }}"
+  delegate_to: "{{ item._ansible_item_label|default(item.item) }}"
   with_items: "{{ containers.results }}"
 
 - name: Early hack image install to adapt for DIND
+  # noqa 302 - this task uses the raw module intentionally
   raw: |
     rm -fv /usr/bin/udevadm /usr/sbin/udevadm
-  delegate_to: "{{ item._ansible_item_label | default(item.item) }}"
+  delegate_to: "{{ item._ansible_item_label|default(item.item) }}"
   with_items: "{{ containers.results }}"
   register: result
   changed_when: result.stdout.find("removed") >= 0

contrib/dind/run-test-distros.sh

@@ -17,7 +17,7 @@ pass_or_fail() {
 test_distro() {
     local distro=${1:?};shift
     local extra="${*:-}"
-    local prefix="${distro[${extra}]}"
+    local prefix="$distro[${extra}]}"
     ansible-playbook -i hosts dind-cluster.yaml -e node_distro=$distro
     pass_or_fail "$prefix: dind-nodes" || return 1
     (cd ../..
@@ -46,7 +46,7 @@ test_distro() {
     pass_or_fail "$prefix: netcheck" || return 1
 }
 
-NODES=($(egrep ^kube_node hosts))
+NODES=($(egrep ^kube-node hosts))
 NETCHECKER_HOST=localhost
 
 : ${OUTPUT_DIR:=./out}
@@ -71,15 +71,15 @@ for spec in ${SPECS}; do
     echo "Loading file=${spec} ..."
     . ${spec} || continue
     : ${DISTROS:?} || continue
-    echo "DISTROS:" "${DISTROS[@]}"
+    echo "DISTROS=${DISTROS[@]}"
     echo "EXTRAS->"
     printf "  %s\n" "${EXTRAS[@]}"
     let n=1
-    for distro in "${DISTROS[@]}"; do
+    for distro in ${DISTROS[@]}; do
         for extra in "${EXTRAS[@]:-NULL}"; do
             # Magic value to let this for run once:
             [[ ${extra} == NULL ]] && unset extra
-            docker rm -f "${NODES[@]}"
+            docker rm -f ${NODES[@]}
             printf -v file_out "%s/%s-%02d.out" ${OUTPUT_DIR} ${spec} $((n++))
             {
                 info "${distro}[${extra}] START: file_out=${file_out}"

contrib/inventory_builder/inventory.py

@@ -44,11 +44,11 @@ import re
 import subprocess
 import sys
 
-ROLES = ['all', 'kube_control_plane', 'kube_node', 'etcd', 'k8s_cluster',
+ROLES = ['all', 'kube-master', 'kube-node', 'etcd', 'k8s-cluster',
-         'calico_rr']
+         'calico-rr']
 PROTECTED_NAMES = ROLES
 AVAILABLE_COMMANDS = ['help', 'print_cfg', 'print_ips', 'print_hostnames',
-                      'load', 'add']
+                      'load']
 _boolean_states = {'1': True, 'yes': True, 'true': True, 'on': True,
                    '0': False, 'no': False, 'false': False, 'off': False}
 yaml = YAML()
@@ -63,12 +63,10 @@ def get_var_as_bool(name, default):
 
 
 CONFIG_FILE = os.environ.get("CONFIG_FILE", "./inventory/sample/hosts.yaml")
-# Remove the reference of KUBE_MASTERS after some deprecation cycles.
+KUBE_MASTERS = int(os.environ.get("KUBE_MASTERS_MASTERS", 2))
-KUBE_CONTROL_HOSTS = int(os.environ.get("KUBE_CONTROL_HOSTS",
-                         os.environ.get("KUBE_MASTERS", 2)))
 # Reconfigures cluster distribution at scale
 SCALE_THRESHOLD = int(os.environ.get("SCALE_THRESHOLD", 50))
-MASSIVE_SCALE_THRESHOLD = int(os.environ.get("MASSIVE_SCALE_THRESHOLD", 200))
+MASSIVE_SCALE_THRESHOLD = int(os.environ.get("SCALE_THRESHOLD", 200))
 
 DEBUG = get_var_as_bool("DEBUG", True)
 HOST_PREFIX = os.environ.get("HOST_PREFIX", "node")
@@ -82,54 +80,32 @@ class KubesprayInventory(object):
     def __init__(self, changed_hosts=None, config_file=None):
         self.config_file = config_file
         self.yaml_config = {}
-        loadPreviousConfig = False
+        if self.config_file:
-        printHostnames = False
-        # See whether there are any commands to process
-        if changed_hosts and changed_hosts[0] in AVAILABLE_COMMANDS:
-            if changed_hosts[0] == "add":
-                loadPreviousConfig = True
-                changed_hosts = changed_hosts[1:]
-            elif changed_hosts[0] == "print_hostnames":
-                loadPreviousConfig = True
-                printHostnames = True
-            else:
-                self.parse_command(changed_hosts[0], changed_hosts[1:])
-                sys.exit(0)
-
-        # If the user wants to remove a node, we need to load the config anyway
-        if changed_hosts and changed_hosts[0][0] == "-":
-            loadPreviousConfig = True
-
-        if self.config_file and loadPreviousConfig:  # Load previous YAML file
             try:
                 self.hosts_file = open(config_file, 'r')
-                self.yaml_config = yaml.load(self.hosts_file)
+                self.yaml_config = yaml.load_all(self.hosts_file)
-            except OSError as e:
+            except OSError:
-                # I am assuming we are catching "cannot open file" exceptions
+                pass
-                print(e)
-                sys.exit(1)
 
-        if printHostnames:
+        if changed_hosts and changed_hosts[0] in AVAILABLE_COMMANDS:
-            self.print_hostnames()
+            self.parse_command(changed_hosts[0], changed_hosts[1:])
             sys.exit(0)
 
         self.ensure_required_groups(ROLES)
 
         if changed_hosts:
             changed_hosts = self.range2ips(changed_hosts)
-            self.hosts = self.build_hostnames(changed_hosts,
+            self.hosts = self.build_hostnames(changed_hosts)
-                                              loadPreviousConfig)
             self.purge_invalid_hosts(self.hosts.keys(), PROTECTED_NAMES)
             self.set_all(self.hosts)
             self.set_k8s_cluster()
             etcd_hosts_count = 3 if len(self.hosts.keys()) >= 3 else 1
             self.set_etcd(list(self.hosts.keys())[:etcd_hosts_count])
             if len(self.hosts) >= SCALE_THRESHOLD:
-                self.set_kube_control_plane(list(self.hosts.keys())[
+                self.set_kube_master(list(self.hosts.keys())[
-                    etcd_hosts_count:(etcd_hosts_count + KUBE_CONTROL_HOSTS)])
+                    etcd_hosts_count:(etcd_hosts_count + KUBE_MASTERS)])
             else:
-                self.set_kube_control_plane(
+                self.set_kube_master(list(self.hosts.keys())[:KUBE_MASTERS])
-                  list(self.hosts.keys())[:KUBE_CONTROL_HOSTS])
             self.set_kube_node(self.hosts.keys())
             if len(self.hosts) >= SCALE_THRESHOLD:
                 self.set_calico_rr(list(self.hosts.keys())[:etcd_hosts_count])
@@ -179,29 +155,17 @@ class KubesprayInventory(object):
         except IndexError:
             raise ValueError("Host name must end in an integer")
 
-    # Keeps already specified hosts,
+    def build_hostnames(self, changed_hosts):
-    # and adds or removes the hosts provided as an argument
-    def build_hostnames(self, changed_hosts, loadPreviousConfig=False):
         existing_hosts = OrderedDict()
         highest_host_id = 0
-        # Load already existing hosts from the YAML
+        try:
-        if loadPreviousConfig:
+            for host in self.yaml_config['all']['hosts']:
-            try:
+                existing_hosts[host] = self.yaml_config['all']['hosts'][host]
-                for host in self.yaml_config['all']['hosts']:
+                host_id = self.get_host_id(host)
-                    # Read configuration of an existing host
+                if host_id > highest_host_id:
-                    hostConfig = self.yaml_config['all']['hosts'][host]
+                    highest_host_id = host_id
-                    existing_hosts[host] = hostConfig
+        except Exception:
-                    # If the existing host seems
+            pass
-                    # to have been created automatically, detect its ID
-                    if host.startswith(HOST_PREFIX):
-                        host_id = self.get_host_id(host)
-                        if host_id > highest_host_id:
-                            highest_host_id = host_id
-            except Exception as e:
-                # I am assuming we are catching automatically
-                # created hosts without IDs
-                print(e)
-                sys.exit(1)
 
         # FIXME(mattymo): Fix condition where delete then add reuses highest id
         next_host_id = highest_host_id + 1
@@ -209,7 +173,6 @@ class KubesprayInventory(object):
 
         all_hosts = existing_hosts.copy()
         for host in changed_hosts:
-            # Delete the host from config the hostname/IP has a "-" prefix
             if host[0] == "-":
                 realhost = host[1:]
                 if self.exists_hostname(all_hosts, realhost):
@@ -218,8 +181,6 @@ class KubesprayInventory(object):
                 elif self.exists_ip(all_hosts, realhost):
                     self.debug("Marked {0} for deletion.".format(realhost))
                     self.delete_host_by_ip(all_hosts, realhost)
-            # Host/Argument starts with a digit,
-            # then we assume its an IP address
             elif host[0].isdigit():
                 if ',' in host:
                     ip, access_ip = host.split(',')
@@ -239,15 +200,11 @@ class KubesprayInventory(object):
                     next_host = subprocess.check_output(cmd, shell=True)
                     next_host = next_host.strip().decode('ascii')
                 else:
-                    # Generates a hostname because we have only an IP address
                     next_host = "{0}{1}".format(HOST_PREFIX, next_host_id)
                     next_host_id += 1
-                # Uses automatically generated node name
-                # in case we dont provide it.
                 all_hosts[next_host] = {'ansible_host': access_ip,
                                         'ip': ip,
                                         'access_ip': access_ip}
-            # Host/Argument starts with a letter, then we assume its a hostname
             elif host[0].isalpha():
                 if ',' in host:
                     try:
@@ -266,7 +223,6 @@ class KubesprayInventory(object):
                                        'access_ip': access_ip}
         return all_hosts
 
-    # Expand IP ranges into individual addresses
     def range2ips(self, hosts):
         reworked_hosts = []
 
@@ -310,7 +266,7 @@ class KubesprayInventory(object):
 
     def purge_invalid_hosts(self, hostnames, protected_names=[]):
         for role in self.yaml_config['all']['children']:
-            if role != 'k8s_cluster' and self.yaml_config['all']['children'][role]['hosts']:  # noqa
+            if role != 'k8s-cluster' and self.yaml_config['all']['children'][role]['hosts']:  # noqa
                 all_hosts = self.yaml_config['all']['children'][role]['hosts'].copy()  # noqa
                 for host in all_hosts.keys():
                     if host not in hostnames and host not in protected_names:
@@ -331,54 +287,52 @@ class KubesprayInventory(object):
             if self.yaml_config['all']['hosts'] is None:
                 self.yaml_config['all']['hosts'] = {host: None}
             self.yaml_config['all']['hosts'][host] = opts
-        elif group != 'k8s_cluster:children':
+        elif group != 'k8s-cluster:children':
             if self.yaml_config['all']['children'][group]['hosts'] is None:
                 self.yaml_config['all']['children'][group]['hosts'] = {
                     host: None}
             else:
                 self.yaml_config['all']['children'][group]['hosts'][host] = None  # noqa
 
-    def set_kube_control_plane(self, hosts):
+    def set_kube_master(self, hosts):
         for host in hosts:
-            self.add_host_to_group('kube_control_plane', host)
+            self.add_host_to_group('kube-master', host)
 
     def set_all(self, hosts):
         for host, opts in hosts.items():
             self.add_host_to_group('all', host, opts)
 
     def set_k8s_cluster(self):
-        k8s_cluster = {'children': {'kube_control_plane': None,
+        k8s_cluster = {'children': {'kube-master': None, 'kube-node': None}}
-                                    'kube_node': None}}
+        self.yaml_config['all']['children']['k8s-cluster'] = k8s_cluster
-        self.yaml_config['all']['children']['k8s_cluster'] = k8s_cluster
 
     def set_calico_rr(self, hosts):
         for host in hosts:
-            if host in self.yaml_config['all']['children']['kube_control_plane']: # noqa
+            if host in self.yaml_config['all']['children']['kube-master']:
-                self.debug("Not adding {0} to calico_rr group because it "
+                self.debug("Not adding {0} to calico-rr group because it "
-                           "conflicts with kube_control_plane "
+                           "conflicts with kube-master group".format(host))
-                           "group".format(host))
                 continue
-            if host in self.yaml_config['all']['children']['kube_node']:
+            if host in self.yaml_config['all']['children']['kube-node']:
-                self.debug("Not adding {0} to calico_rr group because it "
+                self.debug("Not adding {0} to calico-rr group because it "
-                           "conflicts with kube_node group".format(host))
+                           "conflicts with kube-node group".format(host))
                 continue
-            self.add_host_to_group('calico_rr', host)
+            self.add_host_to_group('calico-rr', host)
 
     def set_kube_node(self, hosts):
         for host in hosts:
             if len(self.yaml_config['all']['hosts']) >= SCALE_THRESHOLD:
                 if host in self.yaml_config['all']['children']['etcd']['hosts']:  # noqa
-                    self.debug("Not adding {0} to kube_node group because of "
+                    self.debug("Not adding {0} to kube-node group because of "
                                "scale deployment and host is in etcd "
                                "group.".format(host))
                     continue
             if len(self.yaml_config['all']['hosts']) >= MASSIVE_SCALE_THRESHOLD:  # noqa
-                if host in self.yaml_config['all']['children']['kube_control_plane']['hosts']:  # noqa
+                if host in self.yaml_config['all']['children']['kube-master']['hosts']:  # noqa
-                    self.debug("Not adding {0} to kube_node group because of "
+                    self.debug("Not adding {0} to kube-node group because of "
-                               "scale deployment and host is in "
+                               "scale deployment and host is in kube-master "
-                               "kube_control_plane group.".format(host))
+                               "group.".format(host))
                     continue
-            self.add_host_to_group('kube_node', host)
+            self.add_host_to_group('kube-node', host)
 
     def set_etcd(self, hosts):
         for host in hosts:
@@ -435,11 +389,9 @@ help - Display this message
 print_cfg - Write inventory file to stdout
 print_ips - Write a space-delimited list of IPs from "all" group
 print_hostnames - Write a space-delimited list of Hostnames from "all" group
-add - Adds specified hosts into an already existing inventory
 
 Advanced usage:
-Create new or overwrite old inventory file: inventory.py 10.10.1.5
+Add another host after initial creation: inventory.py 10.10.1.5
-Add another host after initial creation: inventory.py add 10.10.1.6
 Add range of hosts: inventory.py 10.10.1.3-10.10.1.5
 Add hosts with different ip and access ip: inventory.py 10.0.0.1,192.168.10.1 10.0.0.2,192.168.10.2 10.0.0.3,192.168.10.3
 Add hosts with a specific hostname, ip, and optional access ip: first,10.0.0.1,192.168.10.1 second,10.0.0.2 last,10.0.0.3
@@ -450,9 +402,8 @@ Configurable env vars:
 DEBUG                   Enable debug printing. Default: True
 CONFIG_FILE             File to write config to Default: ./inventory/sample/hosts.yaml
 HOST_PREFIX             Host prefix for generated hosts. Default: node
-KUBE_CONTROL_HOSTS      Set the number of kube-control-planes. Default: 2
 SCALE_THRESHOLD         Separate ETCD role if # of nodes >= 50
-MASSIVE_SCALE_THRESHOLD Separate K8s control-plane and ETCD if # of nodes >= 200
+MASSIVE_SCALE_THRESHOLD Separate K8s master and ETCD if # of nodes >= 200
 '''  # noqa
         print(help_text)
 
@@ -473,7 +424,6 @@ def main(argv=None):
     if not argv:
         argv = sys.argv[1:]
     KubesprayInventory(argv, CONFIG_FILE)
-    return 0
 
 
 if __name__ == "__main__":

contrib/inventory_builder/requirements.txt

@@ -1,3 +1,3 @@
 configparser>=3.3.0
-ipaddress
 ruamel.yaml>=0.15.88
+ipaddress

contrib/inventory_builder/test-requirements.txt

@@ -1,3 +1,3 @@
 hacking>=0.10.2
-mock>=1.3.0
 pytest>=2.8.0
+mock>=1.3.0

contrib/inventory_builder/tests/test_inventory.py

@@ -13,9 +13,8 @@
 # under the License.
 
 import inventory
-from io import StringIO
+import mock
 import unittest
-from unittest import mock
 
 from collections import OrderedDict
 import sys
@@ -27,28 +26,6 @@ if path not in sys.path:
 import inventory  # noqa
 
 
-class TestInventoryPrintHostnames(unittest.TestCase):
-
-    @mock.patch('ruamel.yaml.YAML.load')
-    def test_print_hostnames(self, load_mock):
-        mock_io = mock.mock_open(read_data='')
-        load_mock.return_value = OrderedDict({'all': {'hosts': {
-            'node1': {'ansible_host': '10.90.0.2',
-                      'ip': '10.90.0.2',
-                      'access_ip': '10.90.0.2'},
-            'node2': {'ansible_host': '10.90.0.3',
-                      'ip': '10.90.0.3',
-                      'access_ip': '10.90.0.3'}}}})
-        with mock.patch('builtins.open', mock_io):
-            with self.assertRaises(SystemExit) as cm:
-                with mock.patch('sys.stdout', new_callable=StringIO) as stdout:
-                    inventory.KubesprayInventory(
-                        changed_hosts=["print_hostnames"],
-                        config_file="file")
-            self.assertEqual("node1 node2\n", stdout.getvalue())
-            self.assertEqual(cm.exception.code, 0)
-
-
 class TestInventory(unittest.TestCase):
     @mock.patch('inventory.sys')
     def setUp(self, sys_mock):
@@ -90,14 +67,23 @@ class TestInventory(unittest.TestCase):
             self.assertRaisesRegex(ValueError, "Host name must end in an",
                                    self.inv.get_host_id, hostname)
 
+    def test_build_hostnames_add_one(self):
+        changed_hosts = ['10.90.0.2']
+        expected = OrderedDict([('node1',
+                                 {'ansible_host': '10.90.0.2',
+                                  'ip': '10.90.0.2',
+                                  'access_ip': '10.90.0.2'})])
+        result = self.inv.build_hostnames(changed_hosts)
+        self.assertEqual(expected, result)
+
     def test_build_hostnames_add_duplicate(self):
         changed_hosts = ['10.90.0.2']
-        expected = OrderedDict([('node3',
+        expected = OrderedDict([('node1',
                                  {'ansible_host': '10.90.0.2',
                                   'ip': '10.90.0.2',
                                   'access_ip': '10.90.0.2'})])
         self.inv.yaml_config['all']['hosts'] = expected
-        result = self.inv.build_hostnames(changed_hosts, True)
+        result = self.inv.build_hostnames(changed_hosts)
         self.assertEqual(expected, result)
 
     def test_build_hostnames_add_two(self):
@@ -113,30 +99,6 @@ class TestInventory(unittest.TestCase):
         result = self.inv.build_hostnames(changed_hosts)
         self.assertEqual(expected, result)
 
-    def test_build_hostnames_add_three(self):
-        changed_hosts = ['10.90.0.2', '10.90.0.3', '10.90.0.4']
-        expected = OrderedDict([
-            ('node1', {'ansible_host': '10.90.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '10.90.0.2'}),
-            ('node2', {'ansible_host': '10.90.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '10.90.0.3'}),
-            ('node3', {'ansible_host': '10.90.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '10.90.0.4'})])
-        result = self.inv.build_hostnames(changed_hosts)
-        self.assertEqual(expected, result)
-
-    def test_build_hostnames_add_one(self):
-        changed_hosts = ['10.90.0.2']
-        expected = OrderedDict([('node1',
-                                 {'ansible_host': '10.90.0.2',
-                                  'ip': '10.90.0.2',
-                                  'access_ip': '10.90.0.2'})])
-        result = self.inv.build_hostnames(changed_hosts)
-        self.assertEqual(expected, result)
-
     def test_build_hostnames_delete_first(self):
         changed_hosts = ['-10.90.0.2']
         existing_hosts = OrderedDict([
@@ -151,24 +113,7 @@ class TestInventory(unittest.TestCase):
             ('node2', {'ansible_host': '10.90.0.3',
                        'ip': '10.90.0.3',
                        'access_ip': '10.90.0.3'})])
-        result = self.inv.build_hostnames(changed_hosts, True)
+        result = self.inv.build_hostnames(changed_hosts)
-        self.assertEqual(expected, result)
-
-    def test_build_hostnames_delete_by_hostname(self):
-        changed_hosts = ['-node1']
-        existing_hosts = OrderedDict([
-            ('node1', {'ansible_host': '10.90.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '10.90.0.2'}),
-            ('node2', {'ansible_host': '10.90.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '10.90.0.3'})])
-        self.inv.yaml_config['all']['hosts'] = existing_hosts
-        expected = OrderedDict([
-            ('node2', {'ansible_host': '10.90.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '10.90.0.3'})])
-        result = self.inv.build_hostnames(changed_hosts, True)
         self.assertEqual(expected, result)
 
     def test_exists_hostname_positive(self):
@@ -277,11 +222,11 @@ class TestInventory(unittest.TestCase):
             self.inv.yaml_config['all']['children'][group]['hosts'].get(host),
             None)
 
-    def test_set_kube_control_plane(self):
+    def test_set_kube_master(self):
-        group = 'kube_control_plane'
+        group = 'kube-master'
         host = 'node1'
 
-        self.inv.set_kube_control_plane([host])
+        self.inv.set_kube_master([host])
         self.assertIn(
             host, self.inv.yaml_config['all']['children'][group]['hosts'])
 
@@ -296,8 +241,8 @@ class TestInventory(unittest.TestCase):
                 self.inv.yaml_config['all']['hosts'].get(host), opt)
 
     def test_set_k8s_cluster(self):
-        group = 'k8s_cluster'
+        group = 'k8s-cluster'
-        expected_hosts = ['kube_node', 'kube_control_plane']
+        expected_hosts = ['kube-node', 'kube-master']
 
         self.inv.set_k8s_cluster()
         for host in expected_hosts:
@@ -306,7 +251,7 @@ class TestInventory(unittest.TestCase):
                 self.inv.yaml_config['all']['children'][group]['children'])
 
     def test_set_kube_node(self):
-        group = 'kube_node'
+        group = 'kube-node'
         host = 'node1'
 
         self.inv.set_kube_node([host])
@@ -330,12 +275,12 @@ class TestInventory(unittest.TestCase):
 
         self.inv.set_all(hosts)
         self.inv.set_etcd(list(hosts.keys())[0:3])
-        self.inv.set_kube_control_plane(list(hosts.keys())[0:2])
+        self.inv.set_kube_master(list(hosts.keys())[0:2])
         self.inv.set_kube_node(hosts.keys())
         for h in range(3):
             self.assertFalse(
                 list(hosts.keys())[h] in
-                self.inv.yaml_config['all']['children']['kube_node']['hosts'])
+                self.inv.yaml_config['all']['children']['kube-node']['hosts'])
 
     def test_scale_scenario_two(self):
         num_nodes = 500
@@ -346,12 +291,12 @@ class TestInventory(unittest.TestCase):
 
         self.inv.set_all(hosts)
         self.inv.set_etcd(list(hosts.keys())[0:3])
-        self.inv.set_kube_control_plane(list(hosts.keys())[3:5])
+        self.inv.set_kube_master(list(hosts.keys())[3:5])
         self.inv.set_kube_node(hosts.keys())
         for h in range(5):
             self.assertFalse(
                 list(hosts.keys())[h] in
-                self.inv.yaml_config['all']['children']['kube_node']['hosts'])
+                self.inv.yaml_config['all']['children']['kube-node']['hosts'])
 
     def test_range2ips_range(self):
         changed_hosts = ['10.90.0.2', '10.90.0.4-10.90.0.6', '10.90.0.8']
@@ -368,7 +313,7 @@ class TestInventory(unittest.TestCase):
         self.assertRaisesRegex(Exception, "Range of ip_addresses isn't valid",
                                self.inv.range2ips, host_range)
 
-    def test_build_hostnames_create_with_one_different_ips(self):
+    def test_build_hostnames_different_ips_add_one(self):
         changed_hosts = ['10.90.0.2,192.168.0.2']
         expected = OrderedDict([('node1',
                                  {'ansible_host': '192.168.0.2',
@@ -377,7 +322,17 @@ class TestInventory(unittest.TestCase):
         result = self.inv.build_hostnames(changed_hosts)
         self.assertEqual(expected, result)
 
-    def test_build_hostnames_create_with_two_different_ips(self):
+    def test_build_hostnames_different_ips_add_duplicate(self):
+        changed_hosts = ['10.90.0.2,192.168.0.2']
+        expected = OrderedDict([('node1',
+                                 {'ansible_host': '192.168.0.2',
+                                  'ip': '10.90.0.2',
+                                  'access_ip': '192.168.0.2'})])
+        self.inv.yaml_config['all']['hosts'] = expected
+        result = self.inv.build_hostnames(changed_hosts)
+        self.assertEqual(expected, result)
+
+    def test_build_hostnames_different_ips_add_two(self):
         changed_hosts = ['10.90.0.2,192.168.0.2', '10.90.0.3,192.168.0.3']
         expected = OrderedDict([
             ('node1', {'ansible_host': '192.168.0.2',
@@ -386,210 +341,6 @@ class TestInventory(unittest.TestCase):
             ('node2', {'ansible_host': '192.168.0.3',
                        'ip': '10.90.0.3',
                        'access_ip': '192.168.0.3'})])
+        self.inv.yaml_config['all']['hosts'] = OrderedDict()
         result = self.inv.build_hostnames(changed_hosts)
         self.assertEqual(expected, result)
-
-    def test_build_hostnames_create_with_three_different_ips(self):
-        changed_hosts = ['10.90.0.2,192.168.0.2',
-                         '10.90.0.3,192.168.0.3',
-                         '10.90.0.4,192.168.0.4']
-        expected = OrderedDict([
-            ('node1', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'}),
-            ('node2', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'}),
-            ('node3', {'ansible_host': '192.168.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '192.168.0.4'})])
-        result = self.inv.build_hostnames(changed_hosts)
-        self.assertEqual(expected, result)
-
-    def test_build_hostnames_overwrite_one_with_different_ips(self):
-        changed_hosts = ['10.90.0.2,192.168.0.2']
-        expected = OrderedDict([('node1',
-                                 {'ansible_host': '192.168.0.2',
-                                  'ip': '10.90.0.2',
-                                  'access_ip': '192.168.0.2'})])
-        existing = OrderedDict([('node5',
-                                 {'ansible_host': '192.168.0.5',
-                                  'ip': '10.90.0.5',
-                                  'access_ip': '192.168.0.5'})])
-        self.inv.yaml_config['all']['hosts'] = existing
-        result = self.inv.build_hostnames(changed_hosts)
-        self.assertEqual(expected, result)
-
-    def test_build_hostnames_overwrite_three_with_different_ips(self):
-        changed_hosts = ['10.90.0.2,192.168.0.2']
-        expected = OrderedDict([('node1',
-                                 {'ansible_host': '192.168.0.2',
-                                  'ip': '10.90.0.2',
-                                  'access_ip': '192.168.0.2'})])
-        existing = OrderedDict([
-            ('node3', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'}),
-            ('node4', {'ansible_host': '192.168.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '192.168.0.4'}),
-            ('node5', {'ansible_host': '192.168.0.5',
-                       'ip': '10.90.0.5',
-                       'access_ip': '192.168.0.5'})])
-        self.inv.yaml_config['all']['hosts'] = existing
-        result = self.inv.build_hostnames(changed_hosts)
-        self.assertEqual(expected, result)
-
-    def test_build_hostnames_different_ips_add_duplicate(self):
-        changed_hosts = ['10.90.0.2,192.168.0.2']
-        expected = OrderedDict([('node3',
-                                 {'ansible_host': '192.168.0.2',
-                                  'ip': '10.90.0.2',
-                                  'access_ip': '192.168.0.2'})])
-        existing = expected
-        self.inv.yaml_config['all']['hosts'] = existing
-        result = self.inv.build_hostnames(changed_hosts, True)
-        self.assertEqual(expected, result)
-
-    def test_build_hostnames_add_two_different_ips_into_one_existing(self):
-        changed_hosts = ['10.90.0.3,192.168.0.3', '10.90.0.4,192.168.0.4']
-        expected = OrderedDict([
-            ('node2', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'}),
-            ('node3', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'}),
-            ('node4', {'ansible_host': '192.168.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '192.168.0.4'})])
-
-        existing = OrderedDict([
-            ('node2', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'})])
-        self.inv.yaml_config['all']['hosts'] = existing
-        result = self.inv.build_hostnames(changed_hosts, True)
-        self.assertEqual(expected, result)
-
-    def test_build_hostnames_add_two_different_ips_into_two_existing(self):
-        changed_hosts = ['10.90.0.4,192.168.0.4', '10.90.0.5,192.168.0.5']
-        expected = OrderedDict([
-            ('node2', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'}),
-            ('node3', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'}),
-            ('node4', {'ansible_host': '192.168.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '192.168.0.4'}),
-            ('node5', {'ansible_host': '192.168.0.5',
-                       'ip': '10.90.0.5',
-                       'access_ip': '192.168.0.5'})])
-
-        existing = OrderedDict([
-            ('node2', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'}),
-            ('node3', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'})])
-        self.inv.yaml_config['all']['hosts'] = existing
-        result = self.inv.build_hostnames(changed_hosts, True)
-        self.assertEqual(expected, result)
-
-    def test_build_hostnames_add_two_different_ips_into_three_existing(self):
-        changed_hosts = ['10.90.0.5,192.168.0.5', '10.90.0.6,192.168.0.6']
-        expected = OrderedDict([
-            ('node2', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'}),
-            ('node3', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'}),
-            ('node4', {'ansible_host': '192.168.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '192.168.0.4'}),
-            ('node5', {'ansible_host': '192.168.0.5',
-                       'ip': '10.90.0.5',
-                       'access_ip': '192.168.0.5'}),
-            ('node6', {'ansible_host': '192.168.0.6',
-                       'ip': '10.90.0.6',
-                       'access_ip': '192.168.0.6'})])
-
-        existing = OrderedDict([
-            ('node2', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'}),
-            ('node3', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'}),
-            ('node4', {'ansible_host': '192.168.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '192.168.0.4'})])
-        self.inv.yaml_config['all']['hosts'] = existing
-        result = self.inv.build_hostnames(changed_hosts, True)
-        self.assertEqual(expected, result)
-
-    # Add two IP addresses into a config that has
-    # three already defined IP addresses. One of the IP addresses
-    # is a duplicate.
-    def test_build_hostnames_add_two_duplicate_one_overlap(self):
-        changed_hosts = ['10.90.0.4,192.168.0.4', '10.90.0.5,192.168.0.5']
-        expected = OrderedDict([
-            ('node2', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'}),
-            ('node3', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'}),
-            ('node4', {'ansible_host': '192.168.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '192.168.0.4'}),
-            ('node5', {'ansible_host': '192.168.0.5',
-                       'ip': '10.90.0.5',
-                       'access_ip': '192.168.0.5'})])
-
-        existing = OrderedDict([
-            ('node2', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'}),
-            ('node3', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'}),
-            ('node4', {'ansible_host': '192.168.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '192.168.0.4'})])
-        self.inv.yaml_config['all']['hosts'] = existing
-        result = self.inv.build_hostnames(changed_hosts, True)
-        self.assertEqual(expected, result)
-
-    # Add two duplicate IP addresses into a config that has
-    # three already defined IP addresses
-    def test_build_hostnames_add_two_duplicate_two_overlap(self):
-        changed_hosts = ['10.90.0.3,192.168.0.3', '10.90.0.4,192.168.0.4']
-        expected = OrderedDict([
-            ('node2', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'}),
-            ('node3', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'}),
-            ('node4', {'ansible_host': '192.168.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '192.168.0.4'})])
-
-        existing = OrderedDict([
-            ('node2', {'ansible_host': '192.168.0.2',
-                       'ip': '10.90.0.2',
-                       'access_ip': '192.168.0.2'}),
-            ('node3', {'ansible_host': '192.168.0.3',
-                       'ip': '10.90.0.3',
-                       'access_ip': '192.168.0.3'}),
-            ('node4', {'ansible_host': '192.168.0.4',
-                       'ip': '10.90.0.4',
-                       'access_ip': '192.168.0.4'})])
-        self.inv.yaml_config['all']['hosts'] = existing
-        result = self.inv.build_hostnames(changed_hosts, True)
-        self.assertEqual(expected, result)

contrib/inventory_builder/tox.ini

@@ -1,27 +1,21 @@
 [tox]
 minversion = 1.6
 skipsdist = True
-envlist = pep8
+envlist = pep8, py33
 
 [testenv]
-allowlist_externals = py.test
+whitelist_externals = py.test
 usedevelop = True
 deps =
     -r{toxinidir}/requirements.txt
     -r{toxinidir}/test-requirements.txt
 setenv = VIRTUAL_ENV={envdir}
-passenv =
+passenv = http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY
-    http_proxy
-    HTTP_PROXY
-    https_proxy
-    HTTPS_PROXY
-    no_proxy
-    NO_PROXY
 commands = pytest -vv #{posargs:./tests}
 
 [testenv:pep8]
 usedevelop = False
-allowlist_externals = bash
+whitelist_externals = bash
 commands =
     bash -c "find {toxinidir}/* -type f -name '*.py' -print0 | xargs -0 flake8"
 

contrib/kvm-setup/README.md

@@ -5,7 +5,7 @@ deployment on VMs.
 
 This playbook does not create Virtual Machines, nor does it run Kubespray itself.
 
-## User creation
+### User creation
 
 If you want to create a user for running Kubespray deployment, you should specify
 both `k8s_deployment_user` and `k8s_deployment_user_pkey_path`.

contrib/kvm-setup/group_vars/all

@@ -1,2 +1,3 @@
 #k8s_deployment_user: kubespray
 #k8s_deployment_user_pkey_path: /tmp/ssh_rsa
+

contrib/kvm-setup/kvm-setup.yml

@@ -1,9 +1,8 @@
 ---
-- name: Prepare Hypervisor to later install kubespray VMs
+- hosts: localhost
-  hosts: localhost
   gather_facts: False
   become: yes
   vars:
-    bootstrap_os: none
+    - bootstrap_os: none
   roles:
-    - { role: kvm-setup }
+    - kvm-setup

contrib/kvm-setup/roles/kvm-setup/tasks/main.yml

@@ -1,7 +1,7 @@
 ---
 
 - name: Install required packages
-  package:
+  yum:
     name: "{{ item }}"
     state: present
   with_items:
@@ -22,9 +22,9 @@
     - ntp
   when: ansible_os_family == "Debian"
 
-- name: Create deployment user if required
+# Create deployment user if required
-  include_tasks: user.yml
+- include: user.yml
   when: k8s_deployment_user is defined
 
-- name: Set proper sysctl values
+# Set proper sysctl values
-  import_tasks: sysctl.yml
+- include: sysctl.yml

contrib/kvm-setup/roles/kvm-setup/tasks/sysctl.yml

@@ -1,6 +1,6 @@
 ---
 - name: Load br_netfilter module
-  community.general.modprobe:
+  modprobe:
     name: br_netfilter
     state: present
   register: br_netfilter
@@ -20,24 +20,24 @@
       br-netfilter
     owner: root
     group: root
-    mode: "0644"
+    mode: 0644
   when: br_netfilter is defined
 
 
 - name: Enable net.ipv4.ip_forward in sysctl
-  ansible.posix.sysctl:
+  sysctl:
     name: net.ipv4.ip_forward
     value: 1
-    sysctl_file: "{{ sysctl_file_path }}"
+    sysctl_file: /etc/sysctl.d/ipv4-ip_forward.conf
     state: present
     reload: yes
 
 - name: Set bridge-nf-call-{arptables,iptables} to 0
-  ansible.posix.sysctl:
+  sysctl:
     name: "{{ item }}"
     state: present
     value: 0
-    sysctl_file: "{{ sysctl_file_path }}"
+    sysctl_file: /etc/sysctl.d/bridge-nf-call.conf
     reload: yes
   with_items:
     - net.bridge.bridge-nf-call-arptables

contrib/kvm-setup/roles/kvm-setup/tasks/user.yml

@@ -11,7 +11,6 @@
     state: directory
     owner: "{{ k8s_deployment_user }}"
     group: "{{ k8s_deployment_user }}"
-    mode: "0700"
 
 - name: Configure sudo for deployment user
   copy:
@@ -20,13 +19,13 @@
     dest: "/etc/sudoers.d/55-k8s-deployment"
     owner: root
     group: root
-    mode: "0644"
+    mode: 0644
 
 - name: Write private SSH key
   copy:
     src: "{{ k8s_deployment_user_pkey_path }}"
     dest: "/home/{{ k8s_deployment_user }}/.ssh/id_rsa"
-    mode: "0400"
+    mode: 0400
     owner: "{{ k8s_deployment_user }}"
     group: "{{ k8s_deployment_user }}"
   when: k8s_deployment_user_pkey_path is defined
@@ -41,7 +40,7 @@
 - name: Fix ssh-pub-key permissions
   file:
     path: "/home/{{ k8s_deployment_user }}/.ssh/authorized_keys"
-    mode: "0600"
+    mode: 0600
     owner: "{{ k8s_deployment_user }}"
     group: "{{ k8s_deployment_user }}"
   when: k8s_deployment_user_pkey_path is defined

contrib/mitogen/mitogen.yml

@@ -1,51 +0,0 @@
----
-- name: Check ansible version
-  import_playbook: kubernetes_sigs.kubespray.ansible_version
-
-- name: Install mitogen
-  hosts: localhost
-  strategy: linear
-  vars:
-    mitogen_version: 0.3.2
-    mitogen_url: https://github.com/mitogen-hq/mitogen/archive/refs/tags/v{{ mitogen_version }}.tar.gz
-    ansible_connection: local
-  tasks:
-    - name: Create mitogen plugin dir
-      file:
-        path: "{{ item }}"
-        state: directory
-        mode: "0755"
-      become: false
-      loop:
-        - "{{ playbook_dir }}/plugins/mitogen"
-        - "{{ playbook_dir }}/dist"
-
-    - name: Download mitogen release
-      get_url:
-        url: "{{ mitogen_url }}"
-        dest: "{{ playbook_dir }}/dist/mitogen_{{ mitogen_version }}.tar.gz"
-        validate_certs: true
-        mode: "0644"
-
-    - name: Extract archive
-      unarchive:
-        src: "{{ playbook_dir }}/dist/mitogen_{{ mitogen_version }}.tar.gz"
-        dest: "{{ playbook_dir }}/dist/"
-
-    - name: Copy plugin
-      ansible.posix.synchronize:
-        src: "{{ playbook_dir }}/dist/mitogen-{{ mitogen_version }}/"
-        dest: "{{ playbook_dir }}/plugins/mitogen"
-
-    - name: Add strategy to ansible.cfg
-      community.general.ini_file:
-        path: ansible.cfg
-        mode: "0644"
-        section: "{{ item.section | d('defaults') }}"
-        option: "{{ item.option }}"
-        value: "{{ item.value }}"
-      with_items:
-        - option: strategy
-          value: mitogen_linear
-        - option: strategy_plugins
-          value: plugins/mitogen/ansible_mitogen/plugins/strategy

contrib/network-storage/glusterfs/README.md

@@ -8,19 +8,19 @@ In the same directory of this ReadMe file you should find a file named `inventor
 
 Change that file to reflect your local setup (adding more machines or removing them and setting the adequate ip numbers), and save it to `inventory/sample/k8s_gfs_inventory`. Make sure that the settings on `inventory/sample/group_vars/all.yml` make sense with your deployment. Then execute change to the kubespray root folder, and execute (supposing that the machines are all using ubuntu):
 
-```shell
+```
 ansible-playbook -b --become-user=root -i inventory/sample/k8s_gfs_inventory --user=ubuntu ./cluster.yml
 ```
 
 This will provision your Kubernetes cluster. Then, to provision and configure the GlusterFS cluster, from the same directory execute:
 
-```shell
+```
 ansible-playbook -b --become-user=root -i inventory/sample/k8s_gfs_inventory --user=ubuntu ./contrib/network-storage/glusterfs/glusterfs.yml
 ```
 
 If your machines are not using Ubuntu, you need to change the `--user=ubuntu` to the correct user. Alternatively, if your Kubernetes machines are using one OS and your GlusterFS a different one, you can instead specify the `ansible_ssh_user=<correct-user>` variable in the inventory file that you just created, for each machine/VM:
 
-```shell
+```
 k8s-master-1 ansible_ssh_host=192.168.0.147 ip=192.168.0.147 ansible_ssh_user=core
 k8s-master-node-1 ansible_ssh_host=192.168.0.148 ip=192.168.0.148 ansible_ssh_user=core
 k8s-master-node-2 ansible_ssh_host=192.168.0.146 ip=192.168.0.146 ansible_ssh_user=core
@@ -30,7 +30,7 @@ k8s-master-node-2 ansible_ssh_host=192.168.0.146 ip=192.168.0.146 ansible_ssh_us
 
 First step is to fill in a `my-kubespray-gluster-cluster.tfvars` file with the specification desired for your cluster. An example with all required variables would look like:
 
-```ini
+```
 cluster_name = "cluster1"
 number_of_k8s_masters = "1"
 number_of_k8s_masters_no_floating_ip = "2"
@@ -39,7 +39,7 @@ number_of_k8s_nodes = "0"
 public_key_path = "~/.ssh/my-desired-key.pub"
 image = "Ubuntu 16.04"
 ssh_user = "ubuntu"
-flavor_k8s_node = "node-flavor-id-in-your-openstack"
+flavor_k8s_node = "node-flavor-id-in-your-openstack" 
 flavor_k8s_master = "master-flavor-id-in-your-openstack"
 network_name = "k8s-network"
 floatingip_pool = "net_external"
@@ -54,7 +54,7 @@ ssh_user_gfs = "ubuntu"
 
 As explained in the general terraform/openstack guide, you need to source your OpenStack credentials file, add your ssh-key to the ssh-agent and setup environment variables for terraform:
 
-```shell
+```
 $ source ~/.stackrc
 $ eval $(ssh-agent -s)
 $ ssh-add ~/.ssh/my-desired-key
@@ -67,7 +67,7 @@ $ echo Setting up Terraform creds && \
 
 Then, standing on the kubespray directory (root base of the Git checkout), issue the following terraform command to create the VMs for the cluster:
 
-```shell
+```
 terraform apply -state=contrib/terraform/openstack/terraform.tfstate -var-file=my-kubespray-gluster-cluster.tfvars contrib/terraform/openstack
 ```
 
@@ -75,18 +75,18 @@ This will create both your Kubernetes and Gluster VMs. Make sure that the ansibl
 
 Then, provision your Kubernetes (kubespray) cluster with the following ansible call:
 
-```shell
+```
 ansible-playbook -b --become-user=root -i contrib/terraform/openstack/hosts ./cluster.yml
 ```
 
 Finally, provision the glusterfs nodes and add the Persistent Volume setup for GlusterFS in Kubernetes through the following ansible call:
 
-```shell
+```
 ansible-playbook -b --become-user=root -i contrib/terraform/openstack/hosts ./contrib/network-storage/glusterfs/glusterfs.yml
 ```
 
 If you need to destroy the cluster, you can run:
 
-```shell
+```
 terraform destroy -state=contrib/terraform/openstack/terraform.tfstate -var-file=my-kubespray-gluster-cluster.tfvars contrib/terraform/openstack
 ```

contrib/network-storage/glusterfs/glusterfs.yml

@@ -1,29 +1,24 @@
 ---
-- name: Bootstrap hosts
+- hosts: gfs-cluster
-  hosts: gfs-cluster
   gather_facts: false
   vars:
     ansible_ssh_pipelining: false
   roles:
     - { role: bootstrap-os, tags: bootstrap-os}
 
-- name: Gather facts
+- hosts: all
-  hosts: all
   gather_facts: true
 
-- name: Install glusterfs server
+- hosts: gfs-cluster
-  hosts: gfs-cluster
   vars:
     ansible_ssh_pipelining: true
   roles:
     - { role: glusterfs/server }
 
-- name: Install glusterfs servers
+- hosts: k8s-cluster
-  hosts: k8s_cluster
   roles:
     - { role: glusterfs/client }
 
-- name: Configure Kubernetes to use glusterfs
+- hosts: kube-master[0]
-  hosts: kube_control_plane[0]
   roles:
     - { role: kubernetes-pv }

contrib/network-storage/glusterfs/inventory.example

@@ -11,10 +11,10 @@
 # ## Set disk_volume_device_1 to desired device for gluster brick, if different to /dev/vdb (default).
 # ## As in the previous case, you can set ip to give direct communication on internal IPs
 # gfs_node1 ansible_ssh_host=95.54.0.18 # disk_volume_device_1=/dev/vdc  ip=10.3.0.7
-# gfs_node2 ansible_ssh_host=95.54.0.19 # disk_volume_device_1=/dev/vdc  ip=10.3.0.8
+# gfs_node2 ansible_ssh_host=95.54.0.19 # disk_volume_device_1=/dev/vdc  ip=10.3.0.8 
-# gfs_node3 ansible_ssh_host=95.54.0.20 # disk_volume_device_1=/dev/vdc  ip=10.3.0.9
+# gfs_node3 ansible_ssh_host=95.54.0.20 # disk_volume_device_1=/dev/vdc  ip=10.3.0.9 
 
-# [kube_control_plane]
+# [kube-master]
 # node1
 # node2
 
@@ -23,16 +23,16 @@
 # node2
 # node3
 
-# [kube_node]
+# [kube-node]
 # node2
 # node3
 # node4
 # node5
 # node6
 
-# [k8s_cluster:children]
+# [k8s-cluster:children]
-# kube_node
+# kube-node
-# kube_control_plane
+# kube-master
 
 # [gfs-cluster]
 # gfs_node1
@@ -41,3 +41,4 @@
 
 # [network-storage:children]
 # gfs-cluster
+

contrib/network-storage/glusterfs/roles/glusterfs/README.md

@@ -8,22 +8,18 @@ Installs and configures GlusterFS on Linux.
 
 For GlusterFS to connect between servers, TCP ports `24007`, `24008`, and `24009`/`49152`+ (that port, plus an additional incremented port for each additional server in the cluster; the latter if GlusterFS is version 3.4+), and TCP/UDP port `111` must be open. You can open these using whatever firewall you wish (this can easily be configured using the `geerlingguy.firewall` role).
 
-This role performs basic installation and setup of Gluster, but it does not configure or mount bricks (volumes), since that step is easier to do in a series of plays in your own playbook. Ansible 1.9+ includes the [`gluster_volume`](https://docs.ansible.com/ansible/latest/collections/gluster/gluster/gluster_volume_module.html) module to ease the management of Gluster volumes.
+This role performs basic installation and setup of Gluster, but it does not configure or mount bricks (volumes), since that step is easier to do in a series of plays in your own playbook. Ansible 1.9+ includes the [`gluster_volume`](https://docs.ansible.com/gluster_volume_module.html) module to ease the management of Gluster volumes.
 
 ## Role Variables
 
 Available variables are listed below, along with default values (see `defaults/main.yml`):
 
-```yaml
+    glusterfs_default_release: ""
-glusterfs_default_release: ""
-```
 
 You can specify a `default_release` for apt on Debian/Ubuntu by overriding this variable. This is helpful if you need a different package or version for the main GlusterFS packages (e.g. GlusterFS 3.5.x instead of 3.2.x with the `wheezy-backports` default release on Debian Wheezy).
 
-```yaml
+    glusterfs_ppa_use: yes
-glusterfs_ppa_use: yes
+    glusterfs_ppa_version: "3.5"
-glusterfs_ppa_version: "3.5"
-```
 
 For Ubuntu, specify whether to use the official Gluster PPA, and which version of the PPA to use. See Gluster's [Getting Started Guide](https://docs.gluster.org/en/latest/Quick-Start-Guide/Quickstart/) for more info.
 
@@ -33,11 +29,9 @@ None.
 
 ## Example Playbook
 
-```yaml
     - hosts: server
       roles:
         - geerlingguy.glusterfs
-```
 
 For a real-world use example, read through [Simple GlusterFS Setup with Ansible](http://www.jeffgeerling.com/blog/simple-glusterfs-setup-ansible), a blog post by this role's author, which is included in Chapter 8 of [Ansible for DevOps](https://www.ansiblefordevops.com/).
 

contrib/network-storage/glusterfs/roles/glusterfs/client/meta/main.yml

@@ -6,12 +6,12 @@ galaxy_info:
   description: GlusterFS installation for Linux.
   company: "Midwestern Mac, LLC"
   license: "license (BSD, MIT)"
-  min_ansible_version: "2.0"
+  min_ansible_version: 2.0
   platforms:
   - name: EL
     versions:
-    - "6"
+    - 6
-    - "7"
+    - 7
   - name: Ubuntu
     versions:
     - precise

contrib/network-storage/glusterfs/roles/glusterfs/client/tasks/main.yml

@@ -3,19 +3,14 @@
 # hyperkube and needs to be installed as part of the system.
 
 # Setup/install tasks.
-- name: Setup RedHat distros for glusterfs
+- include: setup-RedHat.yml
-  include_tasks: setup-RedHat.yml
   when: ansible_os_family == 'RedHat' and groups['gfs-cluster'] is defined
 
-- name: Setup Debian distros for glusterfs
+- include: setup-Debian.yml
-  include_tasks: setup-Debian.yml
   when: ansible_os_family == 'Debian' and groups['gfs-cluster'] is defined
 
 - name: Ensure Gluster mount directories exist.
-  file:
+  file: "path={{ item }} state=directory mode=0775"
-    path: "{{ item }}"
-    state: directory
-    mode: "0775"
   with_items:
     - "{{ gluster_mount_dir }}"
   when: ansible_os_family in ["Debian","RedHat"] and groups['gfs-cluster'] is defined

contrib/network-storage/glusterfs/roles/glusterfs/client/tasks/setup-Debian.yml

@@ -7,7 +7,7 @@
   register: glusterfs_ppa_added
   when: glusterfs_ppa_use
 
-- name: Ensure GlusterFS client will reinstall if the PPA was just added.  # noqa no-handler
+- name: Ensure GlusterFS client will reinstall if the PPA was just added.  # noqa 503
   apt:
     name: "{{ item }}"
     state: absent

contrib/network-storage/glusterfs/roles/glusterfs/client/tasks/setup-RedHat.yml

@@ -1,14 +1,10 @@
 ---
 - name: Install Prerequisites
-  package:
+  yum: name={{ item }}  state=present
-    name: "{{ item }}"
-    state: present
   with_items:
     - "centos-release-gluster{{ glusterfs_default_release }}"
 
 - name: Install Packages
-  package:
+  yum: name={{ item }}  state=present
-    name: "{{ item }}"
-    state: present
   with_items:
     - glusterfs-client

contrib/network-storage/glusterfs/roles/glusterfs/server/meta/main.yml

@@ -6,12 +6,12 @@ galaxy_info:
   description: GlusterFS installation for Linux.
   company: "Midwestern Mac, LLC"
   license: "license (BSD, MIT)"
-  min_ansible_version: "2.0"
+  min_ansible_version: 2.0
   platforms:
   - name: EL
     versions:
-    - "6"
+    - 6
-    - "7"
+    - 7
   - name: Ubuntu
     versions:
     - precise

contrib/network-storage/glusterfs/roles/glusterfs/server/tasks/main.yml

@@ -4,110 +4,90 @@
   include_vars: "{{ ansible_os_family }}.yml"
 
 # Install xfs package
-- name: Install xfs Debian
+- name: install xfs Debian
-  apt:
+  apt: name=xfsprogs state=present
-    name: xfsprogs
-    state: present
   when: ansible_os_family == "Debian"
 
-- name: Install xfs RedHat
+- name: install xfs RedHat
-  package:
+  yum: name=xfsprogs state=present
-    name: xfsprogs
-    state: present
   when: ansible_os_family == "RedHat"
 
 # Format external volumes in xfs
 - name: Format volumes in xfs
-  community.general.filesystem:
+  filesystem: "fstype=xfs dev={{ disk_volume_device_1 }}"
-    fstype: xfs
-    dev: "{{ disk_volume_device_1 }}"
 
 # Mount external volumes
-- name: Mounting new xfs filesystem
+- name: mounting new xfs filesystem
-  ansible.posix.mount:
+  mount: "name={{ gluster_volume_node_mount_dir }} src={{ disk_volume_device_1 }} fstype=xfs state=mounted"
-    name: "{{ gluster_volume_node_mount_dir }}"
-    src: "{{ disk_volume_device_1 }}"
-    fstype: xfs
-    state: mounted
 
 # Setup/install tasks.
-- name: Setup RedHat distros for glusterfs
+- include: setup-RedHat.yml
-  include_tasks: setup-RedHat.yml
   when: ansible_os_family == 'RedHat'
 
-- name: Setup Debian distros for glusterfs
+- include: setup-Debian.yml
-  include_tasks: setup-Debian.yml
   when: ansible_os_family == 'Debian'
 
 - name: Ensure GlusterFS is started and enabled at boot.
-  service:
+  service: "name={{ glusterfs_daemon }} state=started enabled=yes"
-    name: "{{ glusterfs_daemon }}"
-    state: started
-    enabled: yes
 
 - name: Ensure Gluster brick and mount directories exist.
-  file:
+  file: "path={{ item }} state=directory mode=0775"
-    path: "{{ item }}"
-    state: directory
-    mode: "0775"
   with_items:
     - "{{ gluster_brick_dir }}"
     - "{{ gluster_mount_dir }}"
 
 - name: Configure Gluster volume with replicas
-  gluster.gluster.gluster_volume:
+  gluster_volume:
     state: present
     name: "{{ gluster_brick_name }}"
     brick: "{{ gluster_brick_dir }}"
     replicas: "{{ groups['gfs-cluster'] | length }}"
-    cluster: "{% for item in groups['gfs-cluster'] -%}{{ hostvars[item]['ip'] | default(hostvars[item].ansible_default_ipv4['address']) }}{% if not loop.last %},{% endif %}{%- endfor %}"
+    cluster: "{% for item in groups['gfs-cluster'] -%}{{ hostvars[item]['ip']|default(hostvars[item].ansible_default_ipv4['address']) }}{% if not loop.last %},{% endif %}{%- endfor %}"
     host: "{{ inventory_hostname }}"
     force: yes
   run_once: true
-  when: groups['gfs-cluster'] | length > 1
+  when: groups['gfs-cluster']|length > 1
 
 - name: Configure Gluster volume without replicas
-  gluster.gluster.gluster_volume:
+  gluster_volume:
     state: present
     name: "{{ gluster_brick_name }}"
     brick: "{{ gluster_brick_dir }}"
-    cluster: "{% for item in groups['gfs-cluster'] -%}{{ hostvars[item]['ip'] | default(hostvars[item].ansible_default_ipv4['address']) }}{% if not loop.last %},{% endif %}{%- endfor %}"
+    cluster: "{% for item in groups['gfs-cluster'] -%}{{ hostvars[item]['ip']|default(hostvars[item].ansible_default_ipv4['address']) }}{% if not loop.last %},{% endif %}{%- endfor %}"
     host: "{{ inventory_hostname }}"
     force: yes
   run_once: true
-  when: groups['gfs-cluster'] | length <= 1
+  when: groups['gfs-cluster']|length <= 1
 
 - name: Mount glusterfs to retrieve disk size
-  ansible.posix.mount:
+  mount:
     name: "{{ gluster_mount_dir }}"
-    src: "{{ ip | default(ansible_default_ipv4['address']) }}:/gluster"
+    src: "{{ ip|default(ansible_default_ipv4['address']) }}:/gluster"
     fstype: glusterfs
     opts: "defaults,_netdev"
     state: mounted
   when: groups['gfs-cluster'] is defined and inventory_hostname == groups['gfs-cluster'][0]
 
 - name: Get Gluster disk size
-  setup:
+  setup: filter=ansible_mounts
-    filter: ansible_mounts
   register: mounts_data
   when: groups['gfs-cluster'] is defined and inventory_hostname == groups['gfs-cluster'][0]
 
 - name: Set Gluster disk size to variable
   set_fact:
-    gluster_disk_size_gb: "{{ (mounts_data.ansible_facts.ansible_mounts | selectattr('mount', 'equalto', gluster_mount_dir) | map(attribute='size_total') | first | int / (1024 * 1024 * 1024)) | int }}"
+    gluster_disk_size_gb: "{{ (mounts_data.ansible_facts.ansible_mounts | selectattr('mount', 'equalto', gluster_mount_dir) | map(attribute='size_total') | first | int / (1024*1024*1024)) | int }}"
   when: groups['gfs-cluster'] is defined and inventory_hostname == groups['gfs-cluster'][0]
 
 - name: Create file on GlusterFS
   template:
     dest: "{{ gluster_mount_dir }}/.test-file.txt"
     src: test-file.txt
-    mode: "0644"
   when: groups['gfs-cluster'] is defined and inventory_hostname == groups['gfs-cluster'][0]
 
 - name: Unmount glusterfs
-  ansible.posix.mount:
+  mount:
     name: "{{ gluster_mount_dir }}"
     fstype: glusterfs
-    src: "{{ ip | default(ansible_default_ipv4['address']) }}:/gluster"
+    src: "{{ ip|default(ansible_default_ipv4['address']) }}:/gluster"
     state: unmounted
   when: groups['gfs-cluster'] is defined and inventory_hostname == groups['gfs-cluster'][0]

contrib/network-storage/glusterfs/roles/glusterfs/server/tasks/setup-Debian.yml

@@ -7,7 +7,7 @@
   register: glusterfs_ppa_added
   when: glusterfs_ppa_use
 
-- name: Ensure GlusterFS will reinstall if the PPA was just added.  # noqa no-handler
+- name: Ensure GlusterFS will reinstall if the PPA was just added.  # noqa 503
   apt:
     name: "{{ item }}"
     state: absent

contrib/network-storage/glusterfs/roles/glusterfs/server/tasks/setup-RedHat.yml

@@ -1,15 +1,11 @@
 ---
 - name: Install Prerequisites
-  package:
+  yum: name={{ item }}  state=present
-    name: "{{ item }}"
-    state: present
   with_items:
     - "centos-release-gluster{{ glusterfs_default_release }}"
 
 - name: Install Packages
-  package:
+  yum: name={{ item }}  state=present
-    name: "{{ item }}"
-    state: present
   with_items:
     - glusterfs-server
     - glusterfs-client

contrib/network-storage/glusterfs/roles/glusterfs/server/tests/test.yml

@@ -0,0 +1,5 @@
+---
+- hosts: all
+
+  roles:
+    - role_under_test

contrib/network-storage/glusterfs/roles/kubernetes-pv/ansible/tasks/main.yaml

@@ -3,13 +3,12 @@
   template:
     src: "{{ item.file }}"
     dest: "{{ kube_config_dir }}/{{ item.dest }}"
-    mode: "0644"
   with_items:
     - { file: glusterfs-kubernetes-endpoint.json.j2, type: ep, dest: glusterfs-kubernetes-endpoint.json}
     - { file: glusterfs-kubernetes-pv.yml.j2, type: pv, dest: glusterfs-kubernetes-pv.yml}
     - { file: glusterfs-kubernetes-endpoint-svc.json.j2, type: svc, dest: glusterfs-kubernetes-endpoint-svc.json}
   register: gluster_pv
-  when: inventory_hostname == groups['kube_control_plane'][0] and groups['gfs-cluster'] is defined and hostvars[groups['gfs-cluster'][0]].gluster_disk_size_gb is defined
+  when: inventory_hostname == groups['kube-master'][0] and groups['gfs-cluster'] is defined and hostvars[groups['gfs-cluster'][0]].gluster_disk_size_gb is defined
 
 - name: Kubernetes Apps | Set GlusterFS endpoint and PV
   kube:
@@ -18,6 +17,6 @@
     kubectl: "{{ bin_dir }}/kubectl"
     resource: "{{ item.item.type }}"
     filename: "{{ kube_config_dir }}/{{ item.item.dest }}"
-    state: "{{ item.changed | ternary('latest', 'present') }}"
+    state: "{{ item.changed | ternary('latest','present') }}"
   with_items: "{{ gluster_pv.results }}"
-  when: inventory_hostname == groups['kube_control_plane'][0] and groups['gfs-cluster'] is defined
+  when: inventory_hostname == groups['kube-master'][0] and groups['gfs-cluster'] is defined

contrib/network-storage/glusterfs/roles/kubernetes-pv/ansible/templates/glusterfs-kubernetes-endpoint.json.j2

@@ -21,3 +21,4 @@
     {% endfor %}
   ]
 }
+

contrib/network-storage/heketi/README.md

@@ -1,26 +1,17 @@
 # Deploy Heketi/Glusterfs into Kubespray/Kubernetes
-
 This playbook aims to automate [this](https://github.com/heketi/heketi/blob/master/docs/admin/install-kubernetes.md) tutorial. It deploys heketi/glusterfs into kubernetes and sets up a storageclass.
 
-## Important notice
-
-> Due to resource limits on the current project maintainers and general lack of contributions we are considering placing Heketi into a [near-maintenance mode](https://github.com/heketi/heketi#important-notice)
-
 ## Client Setup
-
 Heketi provides a CLI that provides users with a means to administer the deployment and configuration of GlusterFS in Kubernetes. [Download and install the heketi-cli](https://github.com/heketi/heketi/releases) on your client machine.
 
 ## Install
-
 Copy the inventory.yml.sample over to inventory/sample/k8s_heketi_inventory.yml and change it according to your setup.
-
+```
-```shell
 ansible-playbook --ask-become -i inventory/sample/k8s_heketi_inventory.yml contrib/network-storage/heketi/heketi.yml
 ```
 
 ## Tear down
-
+```
-```shell
 ansible-playbook --ask-become -i inventory/sample/k8s_heketi_inventory.yml contrib/network-storage/heketi/heketi-tear-down.yml
 ```
 

contrib/network-storage/heketi/heketi-tear-down.yml

@@ -1,11 +1,9 @@
 ---
-- name: Tear down heketi
+- hosts: kube-master[0]
-  hosts: kube_control_plane[0]
   roles:
     - { role: tear-down }
 
-- name: Teardown disks in heketi
+- hosts: heketi-node
-  hosts: heketi-node
   become: yes
   roles:
     - { role: tear-down-disks }

contrib/network-storage/heketi/heketi.yml

@@ -1,11 +1,9 @@
 ---
-- name: Prepare heketi install
+- hosts: heketi-node
-  hosts: heketi-node
   roles:
     - { role: prepare }
 
-- name: Provision heketi
+- hosts: kube-master[0]
-  hosts: kube_control_plane[0]
   tags:
     - "provision"
   roles:

contrib/network-storage/heketi/inventory.yml.sample

@@ -2,25 +2,18 @@ all:
     vars:
         heketi_admin_key: "11elfeinhundertundelf"
         heketi_user_key: "!!einseinseins"
-        glusterfs_daemonset:
-            readiness_probe:
-                timeout_seconds: 3
-                initial_delay_seconds: 3
-            liveness_probe:
-                timeout_seconds: 3
-                initial_delay_seconds: 10
     children:
-        k8s_cluster:
+        k8s-cluster:
             vars:
                 kubelet_fail_swap_on: false
             children:
-                kube_control_plane:
+                kube-master:
                     hosts:
                         node1:
                 etcd:
                     hosts:
                         node2:
-                kube_node:
+                kube-node:
                     hosts: &kube_nodes
                         node1:
                         node2:

contrib/network-storage/heketi/roles/prepare/tasks/main.yml

@@ -5,13 +5,13 @@
     - "dm_snapshot"
     - "dm_mirror"
     - "dm_thin_pool"
-  community.general.modprobe:
+  modprobe:
     name: "{{ item }}"
     state: "present"
 
 - name: "Install glusterfs mount utils (RedHat)"
   become: true
-  package:
+  yum:
     name: "glusterfs-fuse"
     state: "present"
   when: "ansible_os_family == 'RedHat'"

contrib/network-storage/heketi/roles/provision/handlers/main.yml

@@ -1,3 +1,3 @@
 ---
-- name: "Stop port forwarding"
+- name: "stop port forwarding"
   command: "killall "

contrib/network-storage/heketi/roles/provision/tasks/bootstrap.yml

@@ -7,9 +7,9 @@
 
 - name: "Bootstrap heketi."
   when:
-    - "(initial_heketi_state.stdout | from_json | json_query(\"items[?kind=='Service']\")) | length == 0"
+    - "(initial_heketi_state.stdout|from_json|json_query(\"items[?kind=='Service']\"))|length == 0"
-    - "(initial_heketi_state.stdout | from_json | json_query(\"items[?kind=='Deployment']\")) | length == 0"
+    - "(initial_heketi_state.stdout|from_json|json_query(\"items[?kind=='Deployment']\"))|length == 0"
-    - "(initial_heketi_state.stdout | from_json | json_query(\"items[?kind=='Pod']\")) | length == 0"
+    - "(initial_heketi_state.stdout|from_json|json_query(\"items[?kind=='Pod']\"))|length == 0"
   include_tasks: "bootstrap/deploy.yml"
 
 # Prepare heketi topology
@@ -20,11 +20,11 @@
 
 - name: "Ensure heketi bootstrap pod is up."
   assert:
-    that: "(initial_heketi_pod.stdout | from_json | json_query('items[*]')) | length == 1"
+    that: "(initial_heketi_pod.stdout|from_json|json_query('items[*]'))|length == 1"
 
 - name: Store the initial heketi pod name
   set_fact:
-    initial_heketi_pod_name: "{{ initial_heketi_pod.stdout | from_json | json_query(\"items[*].metadata.name | [0]\") }}"
+    initial_heketi_pod_name: "{{ initial_heketi_pod.stdout|from_json|json_query(\"items[*].metadata.name|[0]\") }}"
 
 - name: "Test heketi topology."
   changed_when: false
@@ -32,7 +32,7 @@
   command: "{{ bin_dir }}/kubectl exec {{ initial_heketi_pod_name }} -- heketi-cli --user admin --secret {{ heketi_admin_key }} topology info --json"
 
 - name: "Load heketi topology."
-  when: "heketi_topology.stdout | from_json | json_query(\"clusters[*].nodes[*]\") | flatten | length == 0"
+  when: "heketi_topology.stdout|from_json|json_query(\"clusters[*].nodes[*]\")|flatten|length == 0"
   include_tasks: "bootstrap/topology.yml"
 
 # Provision heketi database volume
@@ -58,7 +58,7 @@
     service_query: "items[?metadata.name=='heketi-storage-endpoints' && kind=='Service']"
     job_query: "items[?metadata.name=='heketi-storage-copy-job' && kind=='Job']"
   when:
-    - "heketi_storage_state.stdout | from_json | json_query(secret_query) | length == 0"
+    - "heketi_storage_state.stdout|from_json|json_query(secret_query)|length == 0"
-    - "heketi_storage_state.stdout | from_json | json_query(endpoints_query) | length == 0"
+    - "heketi_storage_state.stdout|from_json|json_query(endpoints_query)|length == 0"
-    - "heketi_storage_state.stdout | from_json | json_query(service_query) | length == 0"
+    - "heketi_storage_state.stdout|from_json|json_query(service_query)|length == 0"
-    - "heketi_storage_state.stdout | from_json | json_query(job_query) | length == 0"
+    - "heketi_storage_state.stdout|from_json|json_query(job_query)|length == 0"