* Override the default value of containerd's root, state, and oom_score configurations
* Add tests data for containerd_storage_dir, containerd_state_dir and containerd_oom_score variables
Basically we need to make necessary TCP/UDP ports open.
However the necessary ports are so many, and sometimes it is difficult
to figure out that is due to firewall issues or not if facing deployment
issues.
To distinguish a root problem on such situation, this adds contrib
playbook to disable the service firewall for Kubespray development
and test.
* add support for using ansible 2.10.x for deploying kubespray
* move dns-autoscaler-clusterrole{binding}.yml to files/ folder
* note that ansible 2.10 is now experimentally supported
* coredns: move files to templates like before #4341
* add initial MetalLB docs
* metallb allow disabling the deployment of the metallb speaker
* calico>=3.18 allow using calico to advertise service loadbalancer IPs
* Document the use of MetalLB and Calico
* clean MetalLB docs
Since K8S 1.21, BoundServiceAccountTokenVolume feature gate is in beta stage, thus activated by default (anyone who follows CSI guidelines has enabled AllAlpha and faced the issue before 1.21).
With this feature, SA tokens are regenerated every hour.
As a consequence for Calico CNI, token in /etc/cni/net.d/calico-kubeconfig copied from /var/run/secrets/kubernetes.io/serviceaccount in install-cni initContainer expires after one hour and any pod creation fails due to unauthorization.
Calico pods need to be restarted so that /etc/cni/net.d/calico-kubeconfig is updated with the new SA token.
follow new naming conventions for gcr's coredns image.
starting from 1.21 kubeadm assumes it to be `coredns/coredns`:
this causes the kubeadm deployment being unable to pull image, beacuse `v`
was also added in image tag, until the role `kubernetes-apps` ovverides
it with the old name, which is only compatible with <=1.7.
Backward comptability with kubeadm <=1.20 is mantained checking
kubernetes version and falling back to old names (`coredns:1.xx`) when
the version is less than 1.21
* rename ansible groups to use _ instead of -
k8s-cluster -> k8s_cluster
k8s-node -> k8s_node
calico-rr -> calico_rr
no-floating -> no_floating
Note: kube-node,k8s-cluster groups in upgrade CI
need clean-up after v2.16 is tagged
* ensure old groups are mapped to the new ones
* crio: add supported versions 1.20 and 1.21 and align default with k8s version
* cri-o: drop versions 1.17 and 1.18 from version matrix
* update note on cri-o version alignment
* calico: drop support for version 3.15
* drop check for calico version >= 3.3, we are at 3.16 minimum now
* we moved to calico 3.16+ so we can default to /opt/cni/bin/install
* AlmaLinux: ansible>2.9.19 is needed to know about AlmaLinux
* AlmaLinux: identify as a centos derrivative
* AlmaLinux: add AlmaLinux to checks for CentOS
* Use ansible_os_family to compare family and not distribution
As the official document[1], the parameter keepcache should be
'0' or '1' as string. To avoid the following warning message,
this fixes the parameter value:
[WARNING]: The value False (type bool) in a string field was
converted to u'False' (type string). If this does not look
like what you expect, quote the entire value to ensure it
does not change.
https://docs.ansible.com/ansible/latest/collections/ansible/builtin/yum_repository_module.html
Context: Load-balancing in Exoscale is performed by associating many
workers with the same EIP. This works, however, the workers cannot access
themselves via the EIP, which is needed at least for cert-managers
"self-test".
Problem: The old iptables based workaround felt fragile and disappointed
me at least once.
New solution: Add the EIP to a loopback interface on each worker.
* Add containerd_extra_args
This is useful for custom containerd config, e.g. auth
Signed-off-by: Zhong Jianxin <azuwis@gmail.com>
* Make containerd config.toml mode 0640
It may contain sensitive information like password
Signed-off-by: Zhong Jianxin <azuwis@gmail.com>
This PR is to move the cilium kvstore options to the configmap
rather than specifying them in the deployment as args. This
is not technically necessary but keeping all the options in
one place is probably not a bad idea.
Tested with cilium 1.9.5.
When attempting a fresh install without cilium_ipsec_enabled I ran
into the following error:
failed: [k8m01] (item={'name': 'cilium', 'file': 'cilium-secret.yml', 'type': 'secret', 'when': 'cilium_ipsec_enabled'}) =>
{"ansible_loop_var": "item", "changed": false, "item": {"file": "cilium-secret.yml", "name": "cilium", "type": "secret",
"when": "cilium_ipsec_enabled"},"msg": "AnsibleUndefinedVariable: 'cilium_ipsec_key' is undefined"}
Moving the when condition from the item level to the task level solved
the issue.
* Add KubeSchedulerConfiguration for k8s 1.19 and up
With release of version 1.19.0 of kubernetes KubeSchedulerConfiguration
was graduated to beta. It allows to extend different stages of
scheduling with profiles. Such effect is achieved by using plugins and
extensions.
This patch adds KubeSchedulerConfiguration for versions 1.19 and later.
Configuration is set to k8s defaults or to kubespray vars. Moving those
defaults to new vars will be done in following patch.
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
* KubeSchedulerConfiguration: add defaults
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
* Add documentation for audit webhook variables
* Enclose the value of audit_webhook_server_url in a codeblock
* Add default value for audit_webhook_batch_max_wait
Starting with Cilium v1.9 the default ipam mode has changed to "Cluster
Scope". See:
https://docs.cilium.io/en/v1.9/concepts/networking/ipam/
With this ipam mode Cilium handles assigning subnets to nodes to use
for pod ip addresses. The default Kubespray deploy uses the Kube
Controller Manager for this (the --allocate-node-cidrs
kube-controller-manager flag is set). This makes the proper ipam mode
for kubespray using cilium v1.9+ "kubernetes".
Tested with Cilium 1.9.5.
This PR also mounts the cilium-config ConfigMap for this variable
to be read properly.
In the future we can probably remove the kvstore and kvstore-opt
Cilium Operator args since they can be in the ConfigMap. I will tackle
that after this merges.
When upgrading cilium from 1.8.8 to 1.9.5 I ran into the following
error:
level=error msg="Unable to update CRD" error="customresourcedefinitions.apiextensions.k8s.io
\"ciliumnodes.cilium.io\" is forbidden: User \"system:serviceaccount:kube-system:cilium-operator\"
cannot update resource \"customresourcedefinitions\" in API group \"apiextensions.k8s.io\" at the
cluster scope" name=CiliumNode/v2 subsys=k8s
The fix was to add the update verb to the clusterrole. I also added
create to match the clusterrole created by the cilium helm chart.
DNSSEC is off by default on ubuntu/bionic64 (18.04) as per resolved.conf(5).
These tasks are artefacts of obsolete infra configuration, and no longer needed.
Further removing these tasks resolves the issue that the tasks always reports
'changed' and bounces systemd-resolved unneccesarily, even if there was no
actual modification of /etc/systemd/resolved.conf.
* Remove contrib/vault
This is marked as broken since 2018 / 3dcb914607
This still reference apiserver.pem, not used since ddffdb63bf
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Finish nuking vault from the codebase
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
This replaces kube-master with kube_control_plane because of [1]:
The Kubernetes project is moving away from wording that is
considered offensive. A new working group WG Naming was created
to track this work, and the word "master" was declared as offensive.
A proposal was formalized for replacing the word "master" with
"control plane". This means it should be removed from source code,
documentation, and user-facing configuration from Kubernetes and
its sub-projects.
NOTE: The reason why this changes it to kube_control_plane not
kube-control-plane is for valid group names on ansible.
[1]: https://github.com/kubernetes/enhancements/blob/master/keps/sig-cluster-lifecycle/kubeadm/2067-rename-master-label-taint/README.md#motivation
While at it remove force_certificate_regeneration
This boolean only forced the renewal of the apiserver certs
Either manually use k8s-certs-renew.sh or set auto_renew_certificates
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Add crun download_url and checksum
* Change versioning format to crun native versioning
* Download crun using download_file.yml
* Get crun version from download defaults
* Delegate crun binary copy task to crun role
* Download Calico KDD CRDs
* Replace kustomize with lineinfile and use ansible assemble module
* Replace find+lineinfile by sed in shell module to avoid nested loop
* add condition on sed
* use block for kdd tasks + remove supernumerary kdd manifest apply in start "Start Calico resources"
"The error was: 'proxy_disable_env' is undefined\n\nThe error appears to
be in '<censored>scale.yml': line 72, column 7"
Fixes 067db686f6
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
upgrades.md explains how to do upgrade from v1.4.3 to v1.4.6 as an
example. The versions are a little old, and the doc readers would
have a concern the upgrade works fine or not.
This updates versions after verifying the way works fine by hands.
* terraform support for UpCloud
* terraform support for UpCloud
* terraform support for UpCloud
* terraform support for UpCloud
* terraform support for UpCloud
* terraform support for UpCloud
* terraform support for UpCloud
* Updates to README.md and main.tf files
* formatting and updating readme
* added a .terraform_validate CI job
* fixed format issue
* added sample inventory
* added symbolic link to group_vars
* added missing tf variables and minor fixes
* added text formatting
* minor formatting fixes
* add nodeselector and tolerations for metallb
* remove unnecessary commented lines in metallb template
* set default speaker toleration to match original manifest
When privileged is enabled for a container, all the `/dev/*` block
devices from the host are mounted into the guest. The
`privileged_without_host_devices` flag prevents host devices from
being passed to privileged containers.
More information:
* https://github.com/containerd/cri/pull/1225
* 1d0f68156b
The important action in kubeadm-version.yml is the templating of the configuration,
not finding / setting the version
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
kubeadm is the default for a long time now,
and admin.conf is created by it, so let kubeadm handle it
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Using `kubeadm init phase kubeconfig all` breaks kubelet client certificate rotation
as we are missing `kubeadm init phase kubelet-finalize all` to point to `kubelet-client-current.pem`
kubeconfig format is stable so let's just use lineinfile,
this will avoid other future breakage
This revert to the logic before 6fe2248314
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
On CentOS 8 they seem to be ignored by default, but better be extra safe
This also make it easy to exclude other network plugin interfaces
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Add terraform scripts for vSphere
* Fixup: Add terraform scripts for vSphere
* Add inventory generation
* Use machines var to provide IPs
* Add README file
* Add default.tfvars file
* Fix newlines at the end of files
* Remove master.count and worker.count variables
* Fixup cloud-init formatting
* Fixes after initial review
* Add warning about disabled DHCP
* Fixes after second review
* Add sample-inventory
* use external_openstack_lbaas_use_octavia for template openstack-cloud-config
* Delete external_openstack_lbaas_use_octavia from default values. Added description and default values of variables to docs
* markdown fix
* make this simple
* set external_openstack_lbaas_use_octavia in default values
* duplicated variable in doc
This replaces KUBE_MASTERS with KUBE_CONTROL_HOSTS because of [1]:
```
The Kubernetes project is moving away from wording that is
considered offensive. A new working group WG Naming was created
to track this work, and the word "master" was declared as offensive.
A proposal was formalized for replacing the word "master" with
"control plane". This means it should be removed from source code,
documentation, and user-facing configuration from Kubernetes and
its sub-projects.
```
[1]: https://github.com/kubernetes/enhancements/blob/master/keps/sig-cluster-lifecycle/kubeadm/2067-rename-master-label-taint/README.md#motivation
Since a790935d02 all proxy users
should be properly configured
Now when you have *_PROXY vars in your environment it can leads to failure
if NO_PROXY is not correct, or to persistent configuration changes
as seen with kubeadm in 1c5391dda7
Instead of playing constant whack-a-bug, inject empty *_PROXY vars everywhere
at the play level, and override at the task level when needed
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Before this commit, we were gathering:
1 !all
7 network
7 hardware
After we are gathering:
1 !all
1 network
1 hardware
ansible_distribution_major_version is gathered by '!all'
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Move proxy_env to kubespray-defaults/defaults
There is no reasons to use set_facts here
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
* Ensure kubeadm doesn't use proxy
*_proxy variables might be present in the environment (/etc/environment, bash profile, ...)
When this is the case we end up with those proxy configuration in /etc/kubernetes/manifests/kube-*.yaml manifests
We cannot unset env variables, but kubeadm is nice enough to ignore empty vars
93d288e2a4/cmd/kubeadm/app/util/env.go (L27)
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
Ubuntu 18.04 crio package ships with 'mountopt = "nodev,metacopy=on"'
even if GA kernel is 4.15 (HWE Kernel can be more recent)
Fedora package ships without metacopy=on
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
By default Ansible stat module compute checksum, list extended attributes and find mime type
To find all stat invocations that really use one of those:
git grep -F stat. | grep -vE 'stat.(islnk|exists|lnk_source|writeable)'
Signed-off-by: Etienne Champetier <e.champetier@ateme.com>
`containerd.io` is the companion package of `docker-ce` and is the
proper package name. This is needed to avoid apt upgrade/dist-upgrade
from breaking kubernetes.
Running remove-node.yml tasks for clean up cluster on Fedora CoreOS.
The task failed to restart network daemon (task name: "reset | Restart network").
Fedora CoreOS is essentially using NetworkManager, but this task returns network.
Signed-off-by: Takashi IIGUNI <iiguni.tks@gmail.com>
* Add unique annotation on coredns deployment and only remove existing deployment if annotation is missing.
* Ignore errors when gathering coredns deployment details to handle case where it doesn't exist yet
* Remove run_once, deletegate_to and add to when statement
* Added force_etcd_cert_refresh var to maintain existing functionality. Broke out etcd node cert syncing from member and admin cert sync logic. Now first etcd will sync node certs to other etcd members on every run to keep all etcds up to date after adding additional worker nodes to the cluster
* Updated etcd cert check tasks to better detect when new certificates need to be generated
* Move usage of force_etcd_cert_refresh var to gen_certs fact set
* Force etcd cert generation per server if force_etcd_cert_refresh is set to true
* Include gathering of node certs even if k8s-cluster member and in etcd group.
* Removed run_once due to when statement
Helm v3.5.2 is a security (patch) release. Users are strongly
recommended to update to this release. It fixes two security issues in
upstream dependencies and one security issue in the Helm codebase.
See https://github.com/helm/helm/releases/tag/v3.5.2
This makes the docker role work the same as the containerd role.
Being able to override this is needed when you have your own debian
repository. E.g. when performing an airgapped installation
* contrib/terraform/exoscale: Rework SSH public keys
Exoscale has a few limitations with `exoscale_ssh_keypair` resources.
Creating several clusters with these scripts may lead to an error like:
```
Error: API error ParamError 431 (InvalidParameterValueException 4350): The key pair "lj-sc-ssh-key" already has this fingerprint
```
This patch reworks handling of SSH public keys. Specifically, we rely on
the more cloud-agnostic way of configuring SSH public keys via
`cloud-init`.
* contrib/terraform/exoscale: terraform fmt
* contrib/terraform/exoscale: Add terraform validate
* contrib/terraform/exoscale: Inline public SSH keys
The Terraform scripts need to install some SSH key, so that Kubespray
(i.e., the "Ansible part") can take over. Initially, we pointed the
Terraform scripts to `~/.ssh/id_rsa.pub`. This proved to be suboptimal:
Operators sharing responbility for a cluster risk unnecessarily replacing resources.
Therefore, it has been determined that it's best to inline the public
SSH keys. The chosen variable `ssh_public_keys` provides some uniformity
with `contrib/azurerm`.
* Fix Terraform Exoscale test
* Fix Terraform 0.14 test
* update local-path-storage config template to version v0.0.19
* changes local_path_provisioner image tag to v0.0.19
* removes copy paste example from rancher local-path-provisioner repo
According to the following recommendation, this moves the directory
to control-plane:
The Kubernetes project is moving away from wording that is considered
offensive. A new working group WG Naming was created to track this work,
and the word "master" was declared as offensive. A proposal was formalized
for replacing the word "master" with "control plane".
Fixes the following error when using Bastion Node with the sample config.
```
fatal: [bastion]: FAILED! => {"msg": "The task includes an option with an undefined variable. The error was: 'dict object' has no attribute 'bastion'\n\nThe error appears to be in '/home/felix/inovex/kubespray/roles/bastion-ssh-config/tasks/main.yml': line 2, column 3, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n---\n- name: set bastion host IP\n ^ here\n"}
```
Previous check for presence of NM assumed "systemctl show
NetworkManager" would exit with a nonzero status code, which seems not
the case anymore with recent Flatcar Container Linux.
This new check also checks the activeness of network manager, as
`is-active` implies presence.
Signed-off-by Jorik Jonker <jorik@kippendief.biz>
This was introduced in 143e2272ff
Extra repo is enabled by default in CentOS, and is not the right repo for EL8
Instead of adding a CentOS repo to RHEL, enable the needed RHEL repos with rhsm_repository
For RHEL 7, we need the "extras" repo for container-selinux
For RHEL 8, we need the "appstream" repo for container-selinux, ipvsadm and socat
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Only checking the kubernetes api on the first master when upgrading is not enough.
Each master needs to be checked before it's upgrade.
Signed-off-by: Rick Haan <rickhaan94@gmail.com>
yum_repository expect really different params, so nothing to factor here
Ubuntu is not an ansible_os_family, the OS family for Ubuntu is Debian
Check for ansible_pkg_mgr == apt
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
we don't need rpm_key, so nothing to factor here
Ubuntu is not an ansible_os_family, the OS family for Ubuntu is Debian
Check for ansible_pkg_mgr == apt
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Here the desciption from Ansible docs
Corresponds to the --force-yes to apt-get and implies allow_unauthenticated: yes
This option will disable checking both the packages' signatures and the certificates of the web servers they are downloaded from.
This option *is not* the equivalent of passing the -f flag to apt-get on the command line
**This is a destructive operation with the potential to destroy your system, and it should almost never be used.** Please also see man apt-get for more information.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
This variable was added as KUBE_MASTERS_MASTERS. That's probably a typo.
Remove the redundant `_MASTERS` suffix. Also, document the variable in the
help message.
TASK [Generate a list of information about the images on a node]
registers list of container images to docker_images.
Then the next TASK [Set pull_required if the desired image is not
yet loaded] does based on expecting images are registered.
However sometimes the first TASK was failed as [1] but the failure
is ignored due to failed_when:false and it makes another issue.
This removes this unnecessary failed_when to detect the failure
at the point.
In addition, this removes no_log:true also because the output doesn't
contain any sensitive data and now it just makes debugging difficult.
[1]: https://gitlab.com/kargo-ci/kubernetes-sigs-kubespray/-/jobs/934714534#L2953
no_proxy is a pain to get right, and having proxy variables present causes issues
(k8s components get proxy configuration after upgrade, see #7100)
It's better to only configure what require proxy:
- the runtime (containerd/docker/crio)
- the package manager + apt_key
- the download tasks
Tested with the following clusters
- 4 CentOS 8 nodes
- 1 Ubuntu 20.04 node
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
In some environments, it might not be possible to ping the IP address
of the nodes, e.g., because ICMP echo is blocked.
This commit allows kubespray to be configured to disable the ping
check, while performing all other checks.
TASK [network_plugin/calico : Calico | Configure calico network pool] **********
task path: /builds/kargo-ci/kubernetes-sigs-kubespray/roles/network_plugin/calico/tasks/install.yml:138
Friday 08 January 2021 17:10:12 +0000 (0:00:01.521) 0:11:36.885 ********
[WARNING]: The value {'kind': 'IPPool', 'apiVersion': 'projectcalico.org/v3',
'metadata': {'name': 'default-pool'}, 'spec': {'blockSize': 24, 'cidr':
'10.233.64.0/18', 'ipipMode': 'Always', 'vxlanMode': 'Never', 'natOutgoing':
True}} (type dict) in a string field was converted to "{'kind': 'IPPool',
'apiVersion': 'projectcalico.org/v3', 'metadata': {'name': 'default-pool'},
'spec': {'blockSize': 24, 'cidr': '10.233.64.0/18', 'ipipMode': 'Always',
'vxlanMode': 'Never', 'natOutgoing': True}}" (type string). If this does not
look like what you expect, quote the entire value to ensure it does not change.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
This fixes the following failures:
./contrib/offline/README.md:14:1 MD014/commands-show-output Dollar signs used before commands without showing output [Context: "$ ./manage-offline-container-i..."]
./contrib/offline/README.md:20:1 MD014/commands-show-output Dollar signs used before commands without showing output [Context: "$ ./manage-offline-container-i..."]
* Remove because of empty need_http_proxy.rc if http/https_proxy and skip_http_proxy_on_os_packages=true is set
* Modify sample for debian and centos skip_http_proxy
* Modify sample for debian and centos skip_http_proxy
If some settings were changed from the default but not commited into an inventory repo,
we risk breaking the cluster / cause downtime, so add some extra checks
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Upgrading docker / containerd without adapting the configuration might break the node,
so disable docker-ce repo by default.
We are already using dpkg hold for Debian.
All containerd.io packages provide /usr/bin/runc, so no need to check
yum_conf was never used for containerd
module_hotfixes should not be needed with the EL8 repo
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* [terraform/aws] Fix Terraform >=0.13 warnings
Terraform >=0.13 gives the following warning:
```
Warning: Interpolation-only expressions are deprecated
```
The fix was tested as follows:
```
rm -rf .terraform && terraform0.12.26 init && terraform0.12.26 validate
rm -rf .terraform && terraform0.13.5 init && terraform0.13.5 validate
rm -rf .terraform && terraform0.14.3 init && terraform0.14.3 validate
```
which gave no errors nor warnings.
* [terraform/openstack] Fixes for Terraform >=0.13
Terraform >=0.13 gives the following error:
```
Error: Failed to install providers
Could not find required providers, but found possible alternatives:
hashicorp/openstack -> terraform-provider-openstack/openstack
```
This patch fixes these errors.
This fix was tested as follows:
```
rm -rf .terraform && terraform0.12.26 init && terraform0.12.26 validate
rm -rf .terraform && terraform0.13.5 init && terraform0.13.5 validate
rm -rf .terraform && terraform0.14.3 init && terraform0.14.3 validate
```
which gave no errors nor warnings for Terraform 0.13.5 and Terraform
0.14.3. Unfortunately, 0.12.x gives a harmless warning, but
with 0.14.3 out the door, I guess we need to move on.
* [terraform/packet] Fixes for Terraform >=0.13
This fix was tested as follows:
```
export PACKET_AUTH_TOKEN=blah-blah
rm -rf .terraform && terraform0.12.26 init && terraform0.12.26 validate
rm -rf .terraform && terraform0.13.5 init && terraform0.13.5 validate
rm -rf .terraform && terraform0.14.3 init && terraform0.14.3 validate
```
Errors are gone, but warnings still remain. It is impossible to please
all three versions of Terraform.
* Add tests for Terraform >=0.13
* Fedora CoreOS: Fix for ethtool pre-installed
Fix error in rpm-ostree when ethtool is already insatlled (FCOS >= 32.20201104.3.0)
* Fedora CoreOS: Fix connection lost
Fedora CoreOS: Ignore connection lost due to reboot and continues the playbook
Now markdownlint covers ./README.md and md files under ./docs only.
However we have a lot of md files under different directories also.
This enables markdownlint for other md files also.
We are currently setting the IP variable to hostIP,
Before https://github.com/projectcalico/node/pull/593 (not yet released)
Calico interpret that as hostIP/32
Using 'can-reach' we get the future behavior
This fixes vxlan and IPIP CrossSubnet modes
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Just after creating a namespace, the corresponding token could not be
created and sometimes the pod creation might be failed.
This adds check of the token in the new namespace to make this test
case stable.
* update files to handle multi-asn bgp peering conditions.
* put back in the serviceClusterIPs. Bad merge.
* remove extraneous environment var.
* update files as discussed with mirwan
* update titles.
* add not in.
* add a conditional for using bgp to advertise cluster ips.
Co-authored-by: marlow-h <mweston@habana.ai>
If cluster-name is not set, the default value "kubernetes" is used.
The loadbalancees created by Kubernetes follow the format:
kube_service_clusterName_serviceNamespace_serviceName
If 2 clusters create a loadbalancer for the same service in the same
namespace, they will share the same non-working loadbalancer.
Signed-off-by: Cedric Hnyda <cedric.hnyda@itera.io>
tests/scripts/ansible-lint.sh was written on the doc, but there was
not such file actually. We can use ansible-lint command to check
ansible yml files without any options.
This updates to use the command.
If a branch name contains '.sh', current shellcheck checks the branch
file under .git/ and outputs error because the format is not shell
script one.
This makes shellcheck exclude files under .git/ to avoid this issue.
* Update hashes and set default version to 1.19.5
Signed-off-by: anthr76 <hello@anthonyrabbito.com>
* Reorder hashes
1.19.5 hashes should be near 1.19.x
* Added back blank line
This fixes the following warning:
[kubernetes/client : Generate admin kubeconfig with external api endpoint]
[WARNING]: Consider using the file module with state=directory rather than
running 'mkdir'. If you need to use command because file is insufficient
you can
RedHat 8.3 merged nf_conntrack_ipv4 in nf_conntrack but still advertise 4.18
so just try to modprobe and decide depending on the success
Also nf_conntrack is a dependency of ip_vs, so no need to care about it
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Ensure libseccomp is installed before starting containerd on CentOS 8
* Simplify libseccomp install on CentOS 8
- Uses `package` module
- Replaces complex version check with 'state: latest'. The version must
be > 2.3 when using with cri-o.
- Removes unnecessary `not is_ostree` condition as CentOS 8 does not use
ostree
* copying ssh key no longer required, works with password auth
* use copy module instead of synchronize (which requires sshpass)
* less tasks and always changed tasks
* containerd docker hub registry mirror support
* add docs
* fix typo
* fix yamllint
* fix indent in sample
and ansible-playbook param in testcases_run
* fix md
* mv common vars to tests/common/_docker_hub_registry_mirror.yml
* checkout vars to upgrade tests
If crictl (and docker) binaries are deployed to the directories
that are not in standard PATH (e.g. /usr/local/bin), it is required
to specify full path to the binaries.
The task outputs the following warning:
TASK [kubernetes/preinstall : Enable ip forwarding]
[WARNING]: The value 1 (type int) in a string field was converted
to u'1' (type string). If this does not look like what you expect,
quote the entire value to ensure it does not change.
This new version uses the same base image as kube-proxy
(k8s.gcr.io/build-image/debian-iptables)
This allow to automatically pick iptables-legacy or iptables-nft,
and be compatible with RHEL/CentOS 8
https://github.com/kubernetes/dns/pull/367
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* fix flake8 errors in Kubespray CI - tox-inventory-builder
* Invalidate CRI-O kubic repo's cache
Signed-off-by: Victor Morales <v.morales@samsung.com>
* add support to configure pkg install retries
and use in CI job tf-ovh_ubuntu18-calico (due to it failing often)
* Switch Calico, Cilium and MetalLB image repos to Quay.io
Co-authored-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Barry Melbourne <9964974+bmelbourne@users.noreply.github.com>
calico PODs are first started and then in a handler killed and
restarted for no reason, nothing has changed.
By using the existing variable 'calico_cni_config' (only defined when
calico has already started) the restart can be skipped.
* create a wrapper script with pki options
* supports all kubespray managed container engines
Co-authored-by: Hans Feldt <hafe@users.noreply.github.com>
* Allow the eventRecordQPS setting to be set.
The eventRecordQPS parameter controls rate limiting for event recording. When zero, unlimited events can cause denial-of-service situations. For my situation, I don't need more than a setting of "5". This change allows me to configure the setting before creating the cluster.
* Allow the eventRecordQPS setting to be set.
The default settings (see types.go) is five. So, this change does not affect the cluster provisioning. However, it does allow for the setting to be changed.
Fedora 31 uses Cgroups v2 by default. This change by passes the kernel
parameter systemd.unified_cgroup_hierarchy=0.
Signed-off-by: Victor Morales <v.morales@samsung.com>
When https://kubespray.io/#/docs/comparisons is generated, having the link in the heading creates the following HTML. When displayed there is no space between "vs" and the link. I simply moved the link into the following paragraph.
```
<h2 id="kubespray-vs-kops"><a href="#/docs/comparisons?id=kubespray-vs-kops" data-id="kubespray-vs-kops" class="anchor"><span>Kubespray vs </span></a><a href="https://github.com/kubernetes/kops" target="_blank" rel="noopener">Kops</a></h2>
```
* Add note about changing private IP in admin.conf.
When I run kubespray, a load balancer is created which should be used instead of the ip of the controller node.
* Procedure to find load balancer and update admin.conf
When I run kubespray, a load balancer is used instead of the private ip of the controller.
* update version of ingress-nginx controller.
Change tag from controller-v0.34.0 to controller-v0.40.2 to use newest tag.
* Update docs about aws deploy templates.
In the yaml templates, there is no mention of idle timeouts. This is why I removed the documentation about it. This might be a mistake. Please verify this. I don't know enough to verify it myself.
* Change label when checking version.
When checking for `app.kubernetes.io/name=ingress-nginx`, a completed pod was selected which is not helpful when trying to `exec`. Changing the label selects the running controller pod.
* put back the information about ELB Idle Timeouts.
When I removed the information, I had overlooked that it was mentioned in the L7 yaml file. Thanks.
and thereby support upgrade from e.g. 1.18.x to 1.19.y
Included OSes:
- Centos7/8
- Ubuntu18/20
New variables for overriding by default installed packages:
- centos_crio_packages
- ubuntu_crio_packages
* Enable Kata Containers for CRI-O runtime
Kata Containers is an OCI runtime where containers are run inside
lightweight VMs. This runtime has been enabled for containerd runtime
thru the kata_containers_enabled variable. This change enables Kata
Containers to CRI-O container runtime.
Signed-off-by: Victor Morales <v.morales@samsung.com>
* Set appropiate conmon_cgroup when crio_cgroup_manager is 'cgroupfs'
* Set manage_ns_lifecycle=true when KataContainers is enabed
* Add preinstall check for katacontainers
Signed-off-by: Victor Morales <v.morales@samsung.com>
Co-authored-by: Pasquale Toscano <pasqualetoscano90@gmail.com>
Command line flags aren't added to kube-proxy which results in missing
feature gates set in this component. Add appropriate setting to
ConfigMap instead.
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
'ansible.vars.hostvars.HostVarsVars object' has no attribute 'kubeadm_upload_cert'
kubeadm_upload_cert will never be found as a hostvar for the first
master since the task is executed for a worker.
Fix by executing the upload task for the first master and register
the needed key. After that, workers can read hostvars for the master
Var kubeadm_etcd_refresh_cert_key removed since it no longer has
any use.
* Adding option to disable gloablly applying a proxy to etc/yum.conf
* Change made to proxy_yum_globaly basedon reviewer feedback
* fix trailing spaces in ymllint
crio refuses to delete pods when cni is unavailable which is the
case e.g. using calico with kdd datastore. See:
https://github.com/cri-o/cri-o/issues/4084
Fix by deleting storage associated with containers. Stop and disable
crio service so switching container runtime can be done.
* Added option to force apiserver and respective client certificate to be regenerated without necessarily needing to bump the K8S cluster version
* Removed extra blank line
Handlers with the same name (Kubeadm | restart kubelet) leads to incorrect playbook execution. As a result, after completing the tasks, kubelet does not restart. This PR fix this behavior
After upgrading to newer Kubernetes(v1.17 at least), kubectl command
shows the following warning message:
WARNING: Kubernetes configuration file is group-readable.
This is insecure. Location: /home/foo/.kube/config
The kubeconfig was copied from {{ artifacts_dir }}/admin.conf with
kubeconfig_localhost feature. It is better to set valid file mode
at getting it on Kubespray.
The label triage/support has been reclassified as kind/support. The
kind/* family of labels makes more logical sense, as they describe the
"kind" of thing an issue or PR is.
For more information, see the announcement email:
https://groups.google.com/g/kubernetes-dev/c/YcaJpsjjLKw/m/i15cLLx5CAAJ
If the `mitogen.yml` playbook is run, it installs Mitogen in this path, causing Git to believe there to 500+ changes. This simply excludes that external module from git
The 0d0cc8cf9c change creates several
DaemonSets to cover the Flannel CNI installation for different CPU
architectures. This change removes the unnecessary architecture value
from the docker tag value.
Signed-off-by: Victor Morales <v.morales@samsung.com>
In case multiple nodeselectors are specified in ingress_nginx_nodeselector, the generated daemonset yaml template for nginx is invalid due to missing indentation starting with the second nodeselector
When stopping at the check of "Stop if ip var does not match local ips"
the error message is like:
fatal: [single-k8s]: FAILED! => {
"assertion": "ip in ansible_all_ipv4_addresses",
"changed": false,
"evaluated_to": false,
"msg": "Assertion failed"
}
That doesn't contain actual IP addresses and it is difficult to understand
what was wrong. This adds the error message which contain actual IP addresses
to investigate the issue if happens.
* calico: add constant calico_min_version_required
and verify current deployed version against it.
* calico: remove upgrade support with data migration
The tool was used pre v3.0.0 and is no longer needed.
* calico: remove old version support from tasks
* calico: remove old ver support from policy ctrl
* calico: remove old ver support from node
* canal: remove old ver support
* remove unused calicoctl download checksums
calico_min_version_required is the oldest version that can be installed
Older versions can be removed.
* Add retries to update calico-rr data in etcd through calicoctl
* Update update-node yaml syntax
* Add comment to clarify ansible block loop
* Remove trailing space
* Fix reserved memory unit in kubelet configuration
Signed-off-by: Wang Zhen <lazybetrayer@gmail.com>
* Move systemReserved default values from template
Signed-off-by: Wang Zhen <lazybetrayer@gmail.com>
* Added ability to set calico vxlan vni and port. defaults to calico's documented defaults.
* Check if calico_network_backend is defined prior to checking value
* Removed calico hidden defaults for vxlan port and vni
* Fixed FELIX_VXLANVNI typo
I kept seeing `TLS handshake error from 10.250.250.158:63770: EOF` from two IP addresses that correlate to my ELB. Changing the health check from TCP to HTTPS stopped the errors from being generated.
* Added support for setting tiller_service_account and tiller_replicas
* Specify helm 2 version to ensure we have a test path that still hits helm 2 code
* Moved tiller_service_account to defaults.yml. Fixed is tiller_replicas defined check.
It was documented as if it were an Ansible variable, but it is a Terraform variable.
This also means the colon syntax was incorrect. TF variables are assigned with an equals sign.
Co-authored-by: rptaylor <rptaylor@uvic.ca>
* Make metallb image repos configurable
* Moved metallb image repo definitions to download role defaults
* Removed comment. These are set in download defaults
After host reboot kubelet and crio goes into a loop and no container is started.
storage_driver in crio.conf overrides system defaults in etc/containers/storage.conf
/etc/containers/storage.conf is installed by package containers-common dependency
installed from cri-o (centos7) and contains "overlay".
Hosts already configured with overlay2 should be reconfigured and the
/var/lib/containers content removed.
* Add comment from roles/kubespray-defaults/defaults/main.yaml clarifying network allocation and sizes
Signed-off-by: Mikael Johansson <mik.json@gmail.com>
* Rewrite of the comment and added new examples
Signed-off-by: Mikael Johansson <mik.json@gmail.com>
* remove podman cni plugin
* configure networkamanger global dns
* allow installation of python3-libselinux by disabling update repo temporary
* remove ipv4 section because it is not a valid configuration
Removes these startup warnings:
Warning: For remote container runtime, --pod-infra-container-image is ignored in kubelet, which should be set in that remote runtime instead
Using "/var/run/crio/crio.sock" as endpoint is deprecated, please consider using full url format "unix:///var/run/crio/crio.sock".
* add snapshot-controller and v1beta1 snapshot api
* fix typo
* udpate manifest to v1beta1
* update
* update manifests
* fix spelling
* wait until crd is applied
* fix missing info in kube module
* revert snapshotclass
* add snapshot crds before applying the csi driver
* add crds, missed them in last commit
* use pull policy from kubespray
* Update CustomResourceDefinition for kubecontrollersconfigurations.crd.projectcalico.org to v1
* Align ClusterRole for kube-controllers with upstream (calico)
* Add support for openstack application credentials
* Add some lines for readability
* Update external_openstack_tenant_id check
Do not check external_openstack_tenant_id when application credentials are defined
* Add check for external_openstack_domain_id
* Fix typo
By default do not allow "unqualified" (without a registry) images
because it is considered unsecure and subject to mitm attacks.
To enable insecure pull configure for example:
crio_registries:
- "docker.io"
- "quay.io"
* Use proper openssl command to differentiate between host and ip in current certificate check
* fixup! Use proper openssl command to differentiate between host and ip in current certificate check
The bootstrap-os role uses a bootstrap script to provision a
python interpreter on flatcar and container os hosts. As the
pypy project switched to another hoster, the download url changed.
If applied this will use the new proper pypy download url in bootstrap script
* Update the cilium svc proxy test to HA mode
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
* Fix cilium strict kube-proxy in HA
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
* Add a single global endpoint variable
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
* Add cilium docs about kube-proxy replacement
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
* Fix issues in docs
Signed-off-by: Arthur Outhenin-Chalandre <arthur@cri.epita.fr>
Nit alert. Sample inventory throws an error when processed
by yamllint. The default line is currently commented out.
However, when uncommenting it our linters fail.
* Option for MetalLB to talk BGP
* Check for BGP peers when metallb_protocol is bgp
* README clarification
* Commented values as documentation only in the sample inventory
* layer 2 or BGP, not both
* log level by default increased to 'info'
* cgroup manager by default set to 'systemd'
* stream port (used by kubelet) bound to 127.0.0.1 for security reasons
* metrics can be enabled and port specified
To make it less confusing for users who uncommented whole block of
local path provisioner [1] the samples should point at least to
version 0.0.3 which supports helper image [2] configured by
local_path_provisioner_helper_image_repo variable. As 0.0.3 is a bit old
samples could point to current newest release 0.0.14.
[1] 45a177e2a0 (commitcomment-38625688)
[2] 315d67fa8c
Trying to layer this package on Fedora 32 causes the install to crash
and furthermore it looks like the original bug linked to in the comment
has been resolved for Fedora 31
* Update calico_veth_mtu to FELIX_IPINIP variable
calico_veth_mtu is specified in the configuration, but since it only works for wireguard, modify it to work for IP-in-IP users.
* Update template with more cleaner expression
* Add additional metadata configuration option to external Openstack CCM (kubernetes-sigs#6338)
* Set the variable external_openstack_metadata_search_order undefined by default
* Fix kubelet cgroup driver detection for crio
Remove fact standalone_kubelet since it is not used
* Fix yamllint complaints of roles/kubernetes/node/tasks/facts.yml
Co-authored-by: Hans Feldt <hafe@users.noreply.github.com>
This changes MetalLB contrib to one of addons for deploying MetalLB with
Kubernetes cluster deployment. By the default, Kubespray doesn't deploy
MetalLB addon.
inventory_builder creates hosts.yaml file with hostnames like "node1",
"node2", etc. Even if specifying override_system_hostname=false, the
output of "kubectl get nodes" shows those hostnames ("node1", etc.)
without using actual hostnames.
To solve this issue, this adds an option USE_REAL_HOSTNAME to get
actual hostnames when creating hosts.yaml file instead of "node1", etc.
Support for Ambassador OSS as an Ingress Controller when
settings `ingress_ambassador_enabled: true`.
Signed-off-by: Alvaro Saurin <alvaro.saurin@gmail.com>
Now the in-tree cloud provider is deprecated and it is recommended to
the external cloud provider for OpenStack instead.
The doc described how to upgrade from the in-tree cloud provider, but
it is better to describe how to deploy the external cloud provider from
scratch instead for current situation.
This updates the OpenStack doc for this usecase.
* Install Kata Containers as additional container runtime
* Create RuntimeClasses for Kata Containers
* Updated Vagrant to optionally run without Docker as container manager
* Updated Vagrant to optionally use Libvirt nested virtualization
* Add Kata Containers documentation
* Fix lint errors
* Add kata_containers_enabled to kubespray-defaults
* Fixed typo error
* Fixed typo error
We need to specify either external_openstack_tenant_name or
external_openstack_tenant_id. Those values were checked by seeing they
are defined or they have actual values separately.
However those values are always defined because of the following code
of openstack/defaults/main.yml:
external_openstack_tenant_id: "{{ lookup('env','OS_TENANT_ID')| default(lookup('env','OS_PROJECT_ID'),true) }}"
external_openstack_tenant_name: "{{ lookup('env','OS_TENANT_NAME')| default(lookup('env','OS_PROJECT_NAME'),true) }}"
So even if not specifying both values, those checks could not detect
the misconfiguration. This fixes this to detect the misconfiguration.
* MINOR: Check kernel version before enable modprobe nf_conntrack
* CLEANUP: no more need to ignore error of this task
* MINOR: Fixing yaml and ansible lint error - remove trailling-space
If the special parameter "$@" is not quoted, the following command will not work:
./kubectl.sh patch storageclass my-storage-class -p '{"metadata": {"annotations":{"storageclass.kubernetes.io/is-default-class":"true"}}}'
* Add oraclelinux8 and disable firewalld
Add oraclelinux8 image and disable firewalld on oraclelinux VMs
* Fix Oracle Linux repositories
As documented in: http://yum.oracle.com/getting-started.html#installing-software-from-oracle-linux-yum-server
public-yum-ol7.repo was deprecated on release 7.6. Some repos were integrated into oracle-linux-ol7.repo (i.e.: ol7_latest, ol7_addons) and other are available as packages (epel). This also adds support for oraclelinux8
* Fix to use ansible_distribution_version
Instead of ansible_distribution_major_version
* Update README.md
On OpenStack history, we used to call "tenant" for separeted namespace.
However we use "project" now instead.
Then we have replaced "tenant" with "project". Then all "TENANT" variables
also are renamed to "PROJECT".
This makes Kubespray search "PROJECT" variable also for newer OpenStack
clouds.
with the Python ruamel.yml library
- Change True/False to true/false in a few places so file can
be more easily round-tripped with the Python ruamel.yml library
flannel, ovn and multus network plugins did not support all taint keys. This
update changes the tolerations to support them all.
According to the documentation:
```
There are two special cases: An empty key with operator Exists matches all keys,
values and effects which means this will tolerate everything. An empty effect matches
all effects with key key.
```
Usage of the empty `key` and `effect` ensures the network plugin daemonset will
be deployed on every nodes (ex: in case of custom taints, or NoExecute effect)
Since MetalLB v0.8[1], metallb:speaker has started publishing an event
nodeAssigned on k8s resource.
To support MetalLB v0.8+, this allows metallb:speaker to create events.
[1]: 5cc6e23776 (diff-60053ad6fecb5a3cfabb6f3d9e720899R246)
Since weave 2.5.1, `NoExecute` taint effect is no more supported,
this changes the daemonset tolerations to change this behavior.
Also remove the toleration key `CriticalAddonsOnly` not required anymore.
If running MetalLB v0.7.3 on k8s v1.18.2, metallb pods output the
following parsing error of v1.ServiceList:
$ kubectl logs controller-dbb46cf84-fw8h8 -n metallb-system
{
"caller":"reflector.go:205",
"level":"error",
"msg":"go.universe.tf/metallb/internal/k8s/k8s.go:231:
Failed to list *v1.Service: v1.ServiceList:
Items: []v1.Service: v1.Service: ObjectMeta:
v1.ObjectMeta: readObjectFieldAsBytes:
expect : after object field, parsing 1605
Then an external IP address is never allocated to the Service of
LoadBalancer type.
By updating MetalLB version to the latest v0.9[1] today, this issue
can be solved.
[1]: https://hub.docker.com/r/metallb/controller/tags
* fix(kubelet): exec notify restart kubelet service when kube-config.yml changed
* Revert "refactor(kubelet handler): change task name("reload kubelet") this is misleading"
This reverts commit 8f5d29560802c7c997293adb1ce9f84d3b20b6cb.
* fix(handlers,kubelet): setting right notify task name
* update documentation to add and remove nodes
* add information about parameters to change when adding multiple etcd nodes
* add information about reset_nodes
* add documentation about adding existing nodes to ectd masters.
* Add additional network configuration options to external Openstack CCM (#6083)
* Change the default version of external openstack cloud controller image to v1.18.1 since there was an issue in v1.18.0 where some IPs of the private network were ignored
* Change Network section in external-openstack-cloud-config.j2 to Networking
* Add networking customization information in the openstack documentation
This updates MetalLB README as following
- Remove unnecessary markdown to read it easily on github
- Make words consistency (kubernetes, loadbalancer)
- Add change-required option
Due to lack of requirements installation on Azure README, the error
can happen:
"The ipaddr filter requires python's netaddr be installed on the
ansible controller"
It is nice to add the installation for Azure users.
The 98e7a07fba commit udpates the
dashboard version to 2.0.0 but it enable skip login flag wasn't
updated. This change updates its identation to avoid issues when
dashboard_skip_login is enabled.
apply-rg.sh was for Azure command version 1("azure" command) and the
command is old and version 2("az" command) is officially used today.
apply-rg_2.sh was for the version 2. In addition, the README[1] says
we need to run apply-rg.sh for applying templates.
This renames apply-rg_2.sh to apply-rg.sh for common usages of the
version 2.
[1]: https://github.com/kubernetes-sigs/kubespray/tree/master/contrib/azurerm#generating-and-applying
The ansible-playbook needs to ssh-login to Azure virtual machines with
ssh keypair, and users need to specify ssh_public_keys for their own
ssh public key. The change of ssh_public_keys is mandatory.
So this updates contrib/azurerm/README.md to explain that.
In addition, the path of all.yml was wrong. That also is updated with
this.
apply-rg_2.sh uses 'az group deployment' command but the command is
deprecated like the following warning message:
"This command is implicitly deprecated because command group
'group deployment' is deprecated and will be removed in a future release.
Use 'deployment group' instead."
This updates these deprecated commands.
FYI: The command has been deprecated since [1] on azure-cli side.
[1]: 991cb7cc7c (diff-2057bbb8441166e4910b34b09d22b58cR222)
* bump to dashboard 2.0 rc6 with metrics scrapper
* fix missing yaml seperator making Replicaset complaining about missing ServiceAccount
* unwanted legay gross hack forgot to remove before
* no need namespace on CrBinding
* bump to 2.0.0 release
* remove dashboard_metrics_scrapper_enabled
* add strategy mitogen_linear when installed mitogen
* add small docs
Rename playbook file
The raw action executes as a regular Mitogen connection, which requires Python on the target, so add strategy: linear to bootstrap-os role playbook.
* add mitogen to CI test
fix typo
* enable mitogen test on deploy-part1 tests
change version from master to release
download tar.gz archive
* run all CI tests with mitogen
* disable mitogen with upgrade CI tests
* enable mitogen on CI tests via env vars
* disable mitogen on CI test by default, enable on some different OS
* disable mitogen CI test on centos8
(get error /usr/bin/python: No such file or directory)
* replace removed repo with kubic repository for centos 7
* add crio configuration for centos8
* add crio configurations for debian
* use correct crio version for fedora
* simplify calulation of required crio version
- gives possibility to overwrite
* change default path for runc
* change default for seccomp path
* change default for conmon
* declare kubic repo for ubuntu
* do not install crictl twice
* move fedora repo modular tasks to crio_repo file
* move centos repo tasks to crio_repo
* declare crio version matrix for ubuntu
* update documentation crio support for ubuntu
cloud_provider option exists in ./inventory/sample/group_vars/all/all.yml
In addition, the quick start shows to create configuration by copying
./inventory/sample. So this updates path of all.yml for fitting the above.
* Add proxy support to CRI-O service
The crio.service requires proxy environment variables when it's
deployed behind a corporated network. This change creates a systemd
configuration file when the proxy variables are defined.
* Remove unnecesary crio's tasks
The playbook that bootstrap openSUSE servers assumes that the
/etc/sysconfig/proxy file exists but the execution fails when
these file is not present. This change guarantees its existence.
The Terraform installation part states that is for CentOS 7, but the echo command refers to OS X binary. Updated the echo command to use the Linux version.
* assembly fallback_ips and no_proxy var only one time on localhost and populate result on all hosts
* add tag always, fix ansible lint errors
* workaround to mitogen issue dw/mitogen#663
* do not gather fact before install python on coreos like distros
* try to pass docker molecule test
* fix upgrade of crio on fcos
- update documents
* install conntrack required by kube-proxy
- like commit 48c41bcbe7
* enable fedora modular repo for crio
* allow to override crio configuration
- set cgroup manager same to kubelet_cgroup_driver if defined
- path of seccomp_profile depends on distribution
* allow to override crio configuration
- fix path for ubuntu
* allow to override crio configuration
- fix cni path for fcos
* added required permissions for querying endpointslice resources
* copy-pasted role permissions from cilium install manifests
* bumped cilium version to v1.7.2
* Fix proxy and module_hotfixes
On CentOS 8 with proxy ansible render inline `proxy` and `module_hotfixes` options.
For example:
`proxy=http://127.0.0.1:3128module_hotfixes=True`
But expected result:
```
proxy=http://127.0.0.1:3128
module_hotfixes=True
```
* Use ini_file module for work with ini files
* Prevent duplicates proxy= option in /etc/yum.conf
Module `lineinfile` is weak, use most powerful module `ini_file` and add or remove `proxy=` when `http_proxy` is defined or not.
* etcd: etcd-events doesn't depend on etcd_cluster_setup
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: remove condition already present on include_tasks
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: fix scaling up
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: use *access_addresses, do not delegate to etcd[0]
We want to wait for the full cluster to be healthy,
so use all the cluster addresses
Also we should be able to run the playbook when etcd[0] is down
(not tested), so do not delegate to etcd[0]
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* etcd: use failed_when for health check
unhealthy cluster is expected on first run, so use failed_when
instead of ignore_errors to remove scary red messages
Also use run_once
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes/preinstall: ensure ansible_fqdn is up to date after changing /etc/hosts
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes/master: regenerate apiserver cert if needed
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Fix chicken and egg problem with proxy_env not defined on the first envinronment usage.
* Disable fact gathering for the first proxy_env evaluation.
* Move proxy_env var set up from the role defaults to the root playbooks as fact.
* requirements.txt: Bump versions
Ansible 2.8+ allow ansible_python_interpreter autodetection
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* tests: do not force ansible_python_interpreter
we do not expect people to set ansible_python_interpreter, so we should not set it in the CI
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Add CentOS 8 Calico to CI
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* requirements.txt: Bump versions
Ansible 2.8+ allow ansible_python_interpreter autodetection
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* tests: do not force ansible_python_interpreter
we do not expect people to set ansible_python_interpreter, so we should not set it in the CI
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubernetes-sigs-kubespray #5824
Added support nodes which are part of Virtual Machine Scale Sets(VMSS)
* kubernetes-sigs-kubespray #5824
* kubernetes-sigs-kubespray #5824
Added comments and updatetd azure docs.
* kubernetes-sigs-kubespray #5824
Added supported values comments for "azure_vmtype" in azure.yml
Before this commit, the bastion entry in the inventary was not honored,
so machines behind firewalls or with unrouted addresses were not
reachable for ansible.
The variable is defined in `kubernetes/preinstall` role and used in several roles. Since `kubernetes/preinstall` is not always included when `ansible-playbook` is run with tag selectors (see #5734 for reason), they will fail, or individual roles must copy the same fact definitions (as in #3846). Moving the definition to the always-included `kubespray-defaults` role will resolve the dependency problem.
- This solves issue #5721 & #5713 (dupes)
- Provide a cleaner default usage pattern for the download role
around etcd that supports 'host' and 'docker' properly
- Extract the 'etcdctl' as a separate task install piece and reuse it where
appropriate
- Update the kubeadm-etcd task to reflect the above change
* fedora coreos support
- bootstrap and new fact for
* fedora coreos support
- fix bootstrap condition
* fedora coreos support
- allow customize packages for fedora coreos bootstrap
* fedora coreos support
- prevent install ptyhon3 and epel via dnf for fedora coreos
* fedora coreos support
- handle all ostree like os in same way
* fedora coreos support
- handle all ostree like os in same way for crio
* fedora coreos support
- add fcos documentations
* Support configuring the insert mode
Defaults to the upstream default https://docs.projectcalico.org/v3.9/reference/felix/configuration
so nothing should change for existing deployments.
This allows coexistence with other firewall management technologies.
* Add a note to the sample config
* Add docker-ce 19.03 packages for Debian & Ubuntu
K8s has updated the recommended Docker version to 19.03. More
specifically it should be 19.03.4, but since we used 18.06.7 instead of
.2, I'm assuming the latest patch version should be used here as well.
* Add docker 19.03 for redhat
The 'regexp' parameter matches last occurrence of a line starting with 'proxy=' and replaces it with the one defined in 'line' parameter. If no match - it works same way as before. This fixes resuming cluster deployments failed after that task (if there was no more than one line starting with 'proxy' in the yum.conf file - this condition should also be reassured with the change introduced here) eg. if they were initiated with Terraform.
refs #5277
As the issue describes, when no external or local load-balanced is used,
kube-proxy won't be able to contact apiserver at 127.0.0.1. So the
config map should be left as is.
* Upgrade etcd to 3.3.18
* Try with etcd 3.3.15 (kubeadm 1.16.7 default)
* Back to square one
* Try with 3.3.11
* Upgrade etcd to 3.3.18 (take 2)
* Try with 3.3.12
* add documentation for how to upgrade to the new external cloud provider
* add migrate_openstack_provider playbook
* fix codeblock syntax highligth
* make docs for migrating cloud provider better
* update grammar
* fix typo
* Make sure the code is correct markdown
* remove Fenced code blocks
* fix markdown syntax
* remove extra lines and fix trailing spaces
* download file
* download containers
* fix push image to nodes
* pull if none image on host
* fix
* improve docker image tag checks.
do not pull already cached images
* rebase fix merge conflict
* add support download_run_once when upgrade and scale cluster
add some test with download_run_once
* set default values to temp flag for every download cycle
* add save,load abilty for containerd and crio when download_run_once=true
* return redefine image save/load command to set_docker_image_facts.yml
* move set command to set_container_facts
* ctr in containerd_bin_dir
* fix order of ctr image export arguments
* temporary disable download_run_once for containerd and crio
due https://github.com/containerd/containerd/issues/4075
* remove unused files
* fix strict yaml linter warning and errors
* refactor logical conditions to pull and cache container images
* remove comment due lint check
* document role
* remove image_load_on_localhost, because cached images are always loaded to docker on remote sites
* remove XXX from debug output
* Run 'container-engine' after drain.
Move possibly disruptive role 'container-engine' to run after the node
is drained.
As that role have to be run on non-cluster nodes as well (etcd and
calico-rr), and those nodes are not drained, add play for that case.
* Check if api is up before upgrade.
If container engine is restarted in previous role, api controller can
take some time to start. This check ensures api is up before upgrade.
When kube-router is used as cni, rules might be added to the mangle table
to support external IPs. Therefore, mangle table should be flushed during
reset as well.
This 38688a4486 change replaces the
value for dockerproject_.+_repo_.+ docker variables but their new
value was previously defined in other variables. This change removes
the dockerproject_.+_repo_.+ docker variables in favor of the older
ones.
* Fix incorrect assertion comparison for kube_network_node_prefix
* Ignore assertion comparison for kube_network_node_prefix when using calico
* Adding more var docs description for kube_network_node_prefix
* Fixing trailing whitespaces
* External OpenStack Cloud Controller Manager implementation
* Adding controller image tag
* Minor fixes
* Restructuring the external cloud controller to work with KubeADM
* Added in code to allow control over pull policy for local path provisioner
* change to imagePullPolicy to use globally used variable k8s_image_pull_policy
* removed unusued variable from defaults
* updated contiv-etcd and cinder-csi-controllerplugin to use k8s_image_pull_policy variable
* Introduce kubelet_config_extra_args and kubelet_node_config_extra_args to pass params to kubelet via YAML config
* kubelet_config_extra_args is not the alternative
* Fix recover-control-plane to work with etcd 3.3.x and add CI
* Set default values for testcase
* Add actual test jobs
* Attempt to satisty gitlab ci linter
* Fix ansible targets
* Set etcd_member_name as stated in the docs...
* Recovering from 0 masters is not supported yet
* Add other master to broken_kube-master group as well
* Increase number of retries to see if etcd needs more time to heal
* Make number of retries for ETCD loops configurable, increase it for recovery CI and document it
* containerd: add proxy support
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kubespray-defaults: add kube_service_addresses / kube_pods_subnet to no_proxy
CIDR notation in no_proxy is supported by a lot of programs/languages,
including go: https://github.com/golang/go/issues/16704
Without that containerd cannot talk the the API server (kube_apiserver_ip),
but it should not go through an external proxy for the nodes/pods/services
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Change dockerproject.org to download.docker.com
dockerproject.org was deprecated in 2017 and has gone down.
* Restore yum repo for containerd
Change-Id: I883bb512a2164a85865b1bd4fb569af0358c8c2b
Co-authored-by: Craig Rodrigues <rodrigc@crodrigues.org>
When running with serial != 100%, like upgrade_cluster.yml, we need to apply this fixup each time
Problem was introduced in 05dc2b3a09
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Raises limit from 100 to 300 because the default is far too low
and the pod can handle 300 with the given resources.
Change-Id: Ib1eec10da3d09d198933fcfe87291587e58d7cdb
I've tested this update by deploying a containerd / etcd cluster on top CentOS7,
MetalLB + NGINX Ingress. Upgrade using upgrade-cluster.yml
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Resolves issue where kubectl cache of <v1.16 api schema
interferes with interacting with daemonsets and deployments.
Change-Id: I63b7046958f2008eb144b6da0004c598f945e0ae
* Fix crictl
* Reload systemd daemon before enabling service
* Typo
* Add crictl template
* Remove seccomp.json for ubuntu
* Set runtime path of runc for ubuntu
* Change path to conmon
There is no cri-tools package in CentOS/EPEL/Red Hat.
Additionally, cri-tools is provided into the installation via
roles/download/defaults/main.yml:104:crictl_download_url.
* Fix python3-libselinux installation for RHEL/CentOS 8
In bootstrap-centos.yml we haven't gathered the facts,
so #5127 couldn't work
Minimum ansible version to run kubespray is 2.7.8,
so ansible_distribution_major_version is defined an there is no need to default it
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Restart NetworkManager for RHEL/CentOS 8
network.service doesn't exist anymore
# systemctl status network
Unit network.service could not be found.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Add module_hotfixes=True to docker / containerd yum repo config
https://bugzilla.redhat.com/show_bug.cgi?id=1734081https://bugzilla.redhat.com/show_bug.cgi?id=1756473
Without this setting you end up with the following error:
# yum install docker-ce
Failed to set locale, defaulting to C
Last metadata expiration check: 0:03:21 ago on Thu Sep 26 22:00:05 2019.
Error:
Problem: package docker-ce-3:19.03.2-3.el7.x86_64 requires containerd.io >= 1.2.2-3, but none of the providers can be installed
- cannot install the best candidate for the job
- package containerd.io-1.2.2-3.3.el7.x86_64 is excluded
- package containerd.io-1.2.2-3.el7.x86_64 is excluded
- package containerd.io-1.2.4-3.1.el7.x86_64 is excluded
- package containerd.io-1.2.5-3.1.el7.x86_64 is excluded
- package containerd.io-1.2.6-3.3.el7.x86_64 is excluded
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* add support for nova servergroups
* Add documentation for openstack nova servergroups
* uppdate to TF 0.12.12 format and fix etcd
* revert for_each change
* fix variables and formatting in main.tf
* try to avoid errors
* update variable
* Update main.tf
* Update main.tf
* update all other instance resources
Initially this was to fix a mis-indented approvers key. However, it turns
out that 'oilbeater' is not a member of kubernetes-sigs nor
kubernetes-incubator (the org this repo was migrated from). Thus this
OWNERS file is failing prow's validation check.
As a workaround I've opted to move them to emeritus_approver, which
isn't valiated and can be used as a hint for other approvers in this
repo
This fixes the scenario where masters are upgraded one at a time
and coredns gets improperly scaled back up to 2 replicas.
Change-Id: I7cc9283f40efcfd61b5813c89a5805c95d901567
* Update parsing of terraform state file for 0.12.12
* Resource does not seem to have a module element but instead has
provider
* Return the boolean right way if it is already a bool since a bool does
not have an lower method
* Remove the setting of ansible_ssh_user to root for all Packet
Not all servers in packet are accessed as root by default. CoreOS
systems use the `core` user. Removing this allows the user to specify
the remote user with an extra_var or in an ansible.cfg file.
* Default to root user for packet devices except on CoreOS
* Update TF_VERSION for packet in tf-validate-packet
Update TV_VERSION to 0.12.12 for gitlab-ci tf-validate-packet tests
* convert packet terraform files to TV_VERSION 4
* initalize terraform before copying the variable file to the top level dir
Kubespray Pull Request #5084 (https://github.com/kubernetes-sigs/kubespray/pull/5084) caused more problems than it solved due to limitations with the synchronize module. See comments on Kubespray Issues #5059 (https://github.com/kubernetes-sigs/kubespray/issues/5059) and #5116 (https://github.com/kubernetes-sigs/kubespray/issues/5116). Details from Ansible documentation: "Currently, synchronize is limited to elevating permissions via passwordless sudo. This is because rsync itself is connecting to the remote machine and rsync doesn’t give us a way to pass sudo credentials in. ... Currently there are only a few connection types which support synchronize (ssh, paramiko, local, and docker) because a sync strategy has been determined for those connection types. Note that the connection for these must not need a password as rsync itself is making the connection and rsync does not provide us a way to pass a password to the connection. ..." Thus, reverting Pull Request #5084.
* Add support for Kubernetes 1.16.1
* Defaults to 1.16.1
* add 1.16.2 checksums and set new version as default
* correct 1.16.2 checksums and add 1.15.5 checksums
Since it is unsupported to skip upgrades, I've detailed the steps for upgrading a step at a time and removed some language that indicated it should work
When using cluster.yml or scale.yml to add/scale nodes in the existing
k8s cluster, the `kubeadm init` wouldn't run. As a result, kube-proxy
wouldn't be created, and therefore the kube-proxy deletion task would
fail, e.g. in the case where kube-router is used and "kube_proxy_remove"
is set to true. As a workaround, add ignore_errors to the kube-proxy
deletion task.
It's unnecessary and breaks when running from within a docker container:
```
An exception occurred during task execution. To see the full traceback, use -vvv. The error was: TimeoutError: Timer expired after 10 seconds
fatal: [localhost]: FAILED! => {"changed": false, "cmd": "/usr/sbin/udevadm info --query property --name /dev/mapper/vg00-root", "msg": "Timer expired after 10 seconds", "rc": 257}
```
The script is not usable unless you are in the '.vagrant/provisioners/ansible/inventory/artifacts' folder.
This update makes this usable from anywhere.
- do not run etcd role when etcd_kubeadm_enabled == true
- remove default value 'systemd' for cgroup driver in containerd role.
this value override autodetect in kubelet_cgroup_driver_detected from docker info
This allows to easily override the gcr, quay, and docker repos with the
mirror repos in countries like China, where the default accesses are
blocked or unstable.
mydict.keys() should be converted to list,
otherwise it causes errors in loop iteration.
Remove extra space after class name, which broke configmap.
Also allow set reclaimPolicy property.
Cleaned up deprecated APIs:
apps/v1beta1
apps/v1beta2
extensions/v1beta1 for ds,deploy,rs
Add workaround for deploying helm using incompatible
deployment manifest.
Change-Id: I78b36741348f47a999df3841ee63cf4e6f377830
* Use python3-libselinux on RHEL8/Centos8
* The fact ansible_facts.distribution_major_version is not present on older Ansible version.
Default it to 0 in when not present and use libselinux-python as package to get current
default behaviour.
Fix for Kubespray Issue #5059 (https://github.com/kubernetes-sigs/kubespray/issues/5059). There is a known issue with the 'fetch' module that will sometimes lead to it failing with a memory error. See ansible/ansible#11702 (https://github.com/ansible/ansible/issues/11702). I encountered this issue with the "Copy kubectl binary to ansible host" task in kubespray/roles/kubernetes/client/tasks/main.yml, and it caused my entire deployment to error out (see "Output of ansible run" above). Replacing 'fetch' with 'synchronize' fixes this issue.
Updated Openstack to terraform 0.12 (#5062)
* update openstack to terraform 0.12(.5)
* replace cluter.tf with cluster.tfvars
* update README.md to terraform 0.12
* update Openstack CI tests to use terraform 0.12
* specify terraform version in openstack README
* gitlab CI to copy cluster.tfvars in case of openstack provider
* The terraform/openstack dynamic inventory can read
tfstate v4 (generated by terraform 0.12) and convert them internally
ro v3 (as generated by terraform 0.11.x).
Additionally the script has been updated to Python 3.
* run 'task download_container | Copy image to ansible host cache' with synchronize on download_delegate host
* try to run task copy file to ansible host on all inventory, not only on first random host
* update openstack to terraform 0.12(.5)
* replace cluter.tf with cluster.tfvars
* update README.md to terraform 0.12
* update Openstack CI tests to use terraform 0.12
* specify terraform version in openstack README
* gitlab CI to copy cluster.tfvars in case of openstack provider
* The terraform/openstack dynamic inventory can read
tfstate v4 (generated by terraform 0.12) and convert them internally
ro v3 (as generated by terraform 0.11.x).
Additionally the script has been updated to Python 3.
Fixes situation when using manual mode because it
tries to download coredns v1.3.1 from the same
image repository where kubernetes images are
downloaded from.
Change-Id: Ibbec8a72c8162ce8befa74e2013a268737ea5f8a
* Refactor calico-rr to run in k8s cluster with taint
Change-Id: I75a3169ff5b36ce8302fc7ef1c32d3eb697b5afa
* add preinstall checks
* rework calico/rr role
Change-Id: I2f0a7e6cb77cf91ad4a615923680760d2e5d9ca8
* add empty calico-rr group
Change-Id: I006c0a60db9b72d02245bf8fdfabcf982144a5ad
* lvm packages removal during tear down skipped by default
* lvm utils execution PATH fixed for CentOS/RH
* Heketi updated to the latest version 9
Signed-off-by: Vitaliy Dmitriev <vi7alya@gmail.com>
* Let Premoderator script add labels
* Fix JQ error
* Minor fixes
* Debug patch label output
* Try again
* Try again
* Try again
* Try again
* Try again
* Minor cleanup
* Enable nodes to run calicoctl
per-node tasks require waiting for calico-node to be applied
Change-Id: Ibe1076b7334a2da0332f2dd766fde0c3f172d1f2
* cleanup tasks that should run on master
Change-Id: I43a837879ef41596f14657ecd7f813899b6865ae
* Switch run_once calico logic to just run on first master
Change-Id: I6893711e354f63c5e1eaf6ac2e23d9a6347a555d
Update README.md to link to the open issue that shows Ansible 2.8.x doesn't work with Kubespray. The requirements.txt file is already fixed to 2.7.8 so only the README needed updating, I think.
* Enable containerd to deploy vanilla containerd package
Fixes kubeadm references to CRI socket for containerd
Fixes download role cache feature to work with containerd
Change-Id: I2ab8f0031107e2f0d1a85c39b4beb66f08509a01
* use containerd for flannel-addons job
Change-Id: Ied375c7d65e64a625ffbd995ff16f2374067dee6
* add containerd vars
Change-Id: Ib9a8a04e501c481a86235413cbec63f3672baf91
* fixup vars
Change-Id: Ibea64e4b18405a578b52a13da100384582aa24c2
* more fixes
* fix rh repo
Change-Id: I00575a77cfb7b81d6095db5d918a52023c8f13ba
* Adjust helm host install for containerd
* Add calico 3.7.3 support
* add calico_datastore variable to policy controller role
* add missing clusterrole rules for calico policy controller
* disable calico kube controller when kdd mode is used for versions < 3.6
8080 is a pretty common port, using nodelocaldns_ip:8080 still
prevents node processes or hostNetwork=true processes to bind to *:8080
so switch to 9254 by default (prometheus port is 9253)
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* Use K8s 1.15
* Use Kubernetes 1.15 and use kubeadm.k8s.io/v1beta2 for
InitConfiguration.
* bump to v1.15.0
* Remove k8s 1.13 checksums.
* Update README kubernetes version 1.15.0.
* Update metrics server 0.3.3 for k8s 1.15
* Remove less than k8s 1.14 related code
* Use kubeadm with --upload-certs instead of --experimental-upload-certs due to depricate
* Update dnsautoscaler 1.6.0
* Skip certificateKey if it's not defined
* Add kubeadm-conftolplane.v2beta2 for k8s 1.15 or later
* Support kubeadm control plane for k8s 1.15
* Update sonobuoy version 0.15.0 for k8s 1.15
* Add limited containerd support
Containerd support for Ubuntu + Calico
* Added CRI-O support for ubuntu
* containerd support.
* Reset containerd support.
* fix lint.
* implemented feedback
* Change task name cri xx instead of cri-o in reset task and timeout condition.
* set crictl to fixed version
* Use docker-ce's container.io package for containerd.
* Add check containerd is installable or not.
* Avoid stop docker when use containerd and optimize retry for reset.
* Add config.toml.
* Fixed containerd for kubelet.env.
* Merge PR #4629
* Remove unused ubuntu variable for containerd
* Polish code for containerd and cri-o
* Refactoring cri socket configuration.
* Configurable conmon.
* Remove unused crictl/runc download
* Now crictl and runc is downloaded by common crictl.yml.
* fixed yamllint error
* Fixed brokenfiles by conflict.
* Remove commented line in config.toml
* Remove readded v1.12.x version
* Fixed broken set_docker_image_facts
* Fix yamllint errors.
* Remove unused apt source
* Fix crictl could not be installed
* Add containerd config from skolekonov's PR #4601
* add macvlan cni to kubespray
* macvlan: lint yaml files and fix sample config file
* macvlan: add OWNERS file
* add macvlan to README
* macvlan : CI first shoot
* macvlan : CI add full masquerade
* delegate retrive pod cidr to master only
* macvlan: add config for CI
* macvlan: add netchecker deployment
kubernetes/master role defines this value as an empty string
when using a cloud provider, not undefined. The check was updated
accordingly.
Change-Id: I58dc31ef4fd568a717a6753eb89ca687933018ae
* Require minimum version of Kubernetes
* Remove checksums for kubernetes version 1.12
* Add kube_version to precheck output and add min required version to README
* Fix merge
* Fix defaults
* Fix typo in precheck
* File and container image downloads are now cached localy, so that repeated vagrant up/down runs do not trigger downloading of those files. This is especially useful on laptops with kubernetes runnig locally on vm's. The total size of the cache, after an ansible run, is currently around 800MB, so bandwidth (=time) savings can be quite significant.
* When download_run_once is false, the default is still not to cache, but setting download_force_cache will still enable caching.
* The local cache location can be set with download_cache_dir and defaults to /tmp/kubernetes_cache
* A local docker instance is no longer required to cache docker images; Images are cached to file. A local docker instance is still required, though, if you wish to download images on localhost.
* Fixed a FIXME, wher the argument was that delegate_to doesn't play nice with omit. That is a correct observation and the fix is to use default(inventory_host) instead of default(omit). See ansible/ansible#26009
* Removed "Register docker images info" task from download_container and set_docker_image_facts because it was faulty and unused.
* Removed redundant when:download.{container,enabled,run_once} conditions from {sync,download}_container.yml
* All features of commit d6fd0d2aca by Timoses <timosesu@gmail.com>, merged May 1st 2019, are included in this patch. Not all code was included verbatim, but each feature of that commit was checked to be working in this patch. One notable change: The actual downloading of the kubeadm images was moved to {download,sync)_container, to enable caching.
Note 1: I considered splitting this patch, but most changes that are not directly related to caching, are a pleasant by-product of implementing the caching code, so splitting would be impractical.
Note 2: I have my doubts about the usefulness of the upload, download and upgrade tags in the download role. Must they remain or can they be removed? If anybody knows, then please speak up.
* Make local volume provisioner dir mode a variable
I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
* Make local volume provisioner dir mode a variable
I need to change this for Nagios monitoring. Others may
need to as well. Had to close previous commits, sorry for
the spam.
Task "kube-roter | Set cni directory permissions"
sets ownership of /opt/cni/bin to "kube"
Task "kube-router | Copy cni plugins"
copies the binaries from the archive setting the ownership
back to "root"
Fix "kube-roter" typo
Signed-off-by: Alberto Murillo <albertomurillosilva@gmail.com>
* Add support for arm images for hyperkube, kubeadm and cni_binary
* Add dummy etcd checksum for arm
This commit adds dummy etcd checksum for arm to avoid "no attribute" error
during setup.
* Add etcd host assert check
* Add 1.13.4 checksums of kubeadm and hyperkube for arm
* Update checksums of kubeadm and hyperkube for arm
* Add dummy checksums for calicoctl_binary_checksums dict
* disable gather_facts because it causes tests to fail
* Remove architecture check for etcd, due to unable to run tests
Long option --become was used in the example but in the comment describing it the short option -b was used.
Use same option in description and example to avoid confusion.
* Added pod psp in Rancher Local Path Provisioner
Added pod security policy (psp) in Rancher Local Path Provisioner.
Signed-off-by: André R. de Miranda <andre@miranda.work>
* Apply psp for Rancher Local Path Provisioner only when local_path_provisioner_namespace is not kube-system and also reorganized the templates
Kubespray waits exit of every drain before run other one.
Running drain every after each other seems better than parallel, because we should check resources availability every time.
But, this way, we have one additional problem: possible restart pods on the nodes that are killed little bit later.
Fast cordon before heavy drain seems like an easy solution.
Error starting nginx because in requiredDropCapabilities is dropped all capabilities.
The nginx requires the following capabilities:
- CHOWN
- SETGID
- SETUID
Signed-off-by: André R. de Miranda <andre@miranda.work>
* updated ansible pinning to prevent more possibilities of breaking changes
* more exact pinning of ansible version
* more exact pinning of ansible version and also all the rest
* added testing requirements.txt pinning settings
* removed boto from testing requirements.txt
Without this, pulls are considered for all
hosts groups, even if not targetted by the downloads
`groups` list. Hence, a download/sync is triggered
even though the host does not require the image.
* Disable kube_api_anonymous_auth by default to secure the setup
* Disable metrics-server in addons. Health endpoint is slow and unstable
* Fix anonymous-auth missing in configuration
* Cleanup a bit
* Fix kube anon auth
* Download to delegate and sync files when download_run_once
* Fail on error after saving container image
* Do not set changed status when downloaded container was up to date
* Only sync containers when they are actually required
Previously, non-required images (pull_required=false as
image existed on target host) were synced to the target
hosts. This failed as the image was not downloaded to
the download_delegate and hence was not available for
syncing.
* Sync containers when only missing on some hosts
* Consider images with multiple repo tags
* Enable kubeadm images pull/syncing with download_delegate
* Use kubeadm images list to pull/sync
'kubeadm config images pull' is replaced by collecting the images
list with 'kubeadm config images list' and using the commonly
used method of pull/syncing the images.
* Ensure containers are downloaded and synced for all hosts
* Fix download/syncing when download_delegate is a kubernetes host
When docker_container_storage_setup is false,
docker service should not depend on docker-storage-setup service,
because it's not installed.
For example, when using overlay2 on recent RHEL 7/Centos 7 kernels,
you most likely don't need it.
* Fix nodeselectors for contiv and nginx-ingress
Change-Id: Ib3eb6bd87193c69a90ee944c9164a0b6792c79ba
* Set kube proxy mode to iptables for addons task
Change-Id: Iff71a71f672405c74b4708c71db15ddc4391a53a
Cilium requires a high kernel. rhel7 and centos7 are too low, so they are removed.
Bumping ubuntu to ubuntu-1804
Change-Id: Ib1bffa45b8f9ed0ba500f751714372b3a3f7878b
* Mark "Calico | Set global as_num" as "unchanged"
This command executes with "--skip-exists" parameter, so it is idempotent
and should not be marked as "changed".
* trigger ci
add the support of the folling property in azure-credential-check.yml
- azure_loadbalancer_sku: Sku of Load Balancer and Public IP. Candidate values are: basic and standard.
- azure_exclude_master_from_standard_lb: excludes master nodes from standard load balancer.
- azure_disable_outbound_snat: disables the outbound SNAT for public load balancer rules
- useInstanceMetadata: Use instance metadata service where possible
- azure_primary_availability_set: (Optional) The name of the availability set that should be used as the load balancer backend
We don't need to support upgrades from 2 year old installs,
just from the last major version.
Also changed most retried tasks to 1s delay instead of longer.
* Add README to bootstrap-os role
* Rework bootstrap-os once more
* Document workarounds for bugs/deficiencies in Ansible modules
* Unify and document role variables
* Remove installation of additional packages and repositories
* Merge Ubuntu and Debian tasks
* Remove pipelining setting from default playbooks
* Fix OpenSUSE not running its required tasks
Ansible 2.0 has deprecated the “ssh” from ansible_ssh_host.
Updating the docs to be more aligned with the Ansible version used in the sample/inventory.ini file as well.
Also adding `[bastion]` group in the docs to avoid confusion.
The docker service provided by the containers-basic bundle is masked
in ClearLinux distribution. This is causing errors in the following
steps. This commit ensures that the unit is not masked.
* Use K8s 1.14 and add kubeadm experimental control plane mode
This reverts commit d39c273d96.
* Cleanup kubeadm setup run on first master
* pin kubeadm_certificate_key in test
* Remove kubelet autolabel of kube-node, add symlink for pki dir
Change-Id: Id5e74dd667c60675dbfe4193b0bc9fb44380e1ca
The BINDIR variable defined on the runc's Makefile[1] defines
installation path is on $(PREFIX)/sbin which used for most of the
Linux distributions. This change fixes the absolute path used for
non-ClearLinux distributions (CentOS, Ubuntu).
[1] https://github.com/opencontainers/runc/blob/master/Makefile#L10
The Stateless ClearLinux feature[1] requires the creation of folders
in /etc folder. This change ensure the existence of the
/etc/bash_completion.d/ folder for ClearLinux Distribution.
[1] https://clearlinux.org/features/stateless
* PHASE 2 - Enable Packet-CI in gitlab
* Add gitlab files
* Reset files back and only keep Packet
* Include packet
* Add missing Upgrade Tests
* Update GCE jobs etc
* Fix bug
* Yaml lint all gitlab files
* Remove GCE
* Test
* Test again
* Enable GCE again
* Install requirements
* Cleanup the gitlab file
* Cleanup runner tags
* Install requirements
* Test
* Test variables for gce
* Test again
* Test again
* Fix
* Update
* Add k8s_allowed_remote_ips variable
Useful for defining CIDRs allowed to initiate a SSH connection when
you don't want to use a bastion.
* Add TF_VAR_k8s_allowed_remote_ips variable to tf-apply-ovh
* Enable nodelocaldns by default
* Enable nodelocaldns by default
* nodelocaldns is now default
* Disable enable_nodelocaldns for the addons CI jobs
Disable enable_nodelocaldns for the addons CI jobs to make sure things still work without nodelocaldns
* Add ansible-lint as gitlab-ci step
* Fix jinja2 syntax in include_tasks that breaks ansible-lint
* Use a block scalar to get around gitlab quoting/escaping rules
* Run ansible-lint in verbose mode in CI
* Update CI to use 2.9.0 release and update Dockerfile to now use 18.04
* Update CI to use 2.9.0 release and update Dockerfile to now use 18.04
* Update the kubectl bin
This will fix error: error converting YAML to JSON: yaml: line 36: mapping values are not allowed in this context
Signed-off-by: Abdulaziz AlMalki <almalki.a@gmail.com>
2019-04-09 05:23:06 -07:00
1243 changed files with 65303 additions and 15934 deletions
about: Support request or question relating to Kubespray
labels: kind/support
---
<!--
STOP -- PLEASE READ!
GitHub is not the right place for support requests.
If you're looking for help, check [Stack Overflow](https://stackoverflow.com/questions/tagged/kubespray) and the [troubleshooting guide](https://kubernetes.io/docs/tasks/debug-application-cluster/troubleshooting/).
You can also post your question on the [Kubernetes Slack](http://slack.k8s.io/) or the [Discuss Kubernetes](https://discuss.kubernetes.io/) forum.
If the matter is security related, please disclose it privately via https://kubernetes.io/security/.
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, please read our contributor guidelines: https://git.k8s.io/community/contributors/guide/first-contribution.md and developer guide https://git.k8s.io/community/contributors/devel/development.md
2. Please label this pull request according to what type of issue you are addressing, especially if this is a release targeted pull request. For reference on required PR/issue labels, read here:
3. Ensure you have added or ran the appropriate tests for your PR: https://git.k8s.io/community/contributors/devel/sig-testing/testing.md
4. If you want*faster* PR reviews, read how: https://git.k8s.io/community/contributors/guide/pull-requests.md#best-practices-for-faster-reviews
5. Follow the instructions for writing a release note: https://git.k8s.io/community/contributors/guide/release-notes.md
6. If the PR is unfinished, see how to mark it: https://git.k8s.io/community/contributors/guide/pull-requests.md#marking-unfinished-pull-requests
-->
**What type of PR is this?**
> Uncomment only one ` /kind <>` line, hit enter to put that in a new line, and remove leading whitespaces from that line:
>
> /kind api-change
> /kind bug
> /kind cleanup
> /kind design
> /kind documentation
> /kind failing-test
> /kind feature
> /kind flake
**What this PR does / why we need it**:
**Which issue(s) this PR fixes**:
<!--
*Automatically closes linked issue when PR is merged.
Usage: `Fixes #<issue number>`, or `Fixes (paste link of issue)`.
_If PR is about `failing-tests or flakes`, please post the related issues/tests in a comment and do not use `Fixes`_*
-->
Fixes #
**Special notes for your reviewer**:
**Does this PR introduce a user-facing change?**:
<!--
If no, just write "NONE" in the release-note block below.
If yes, a release note is required:
Enter your extended release note in the block below. If the PR requires additional action from users switching to the new release, include the string "action required".
## How to become a contributor and submit your own code
### Environment setup
It is recommended to use filter to manage the GitHub email notification, see [examples for setting filters to Kubernetes Github notifications](https://github.com/kubernetes/community/blob/master/communication/best-practices.md#examples-for-setting-filters-to-kubernetes-github-notifications)
To install development dependencies you can use `pip install -r tests/requirements.txt`
#### Linting
Kubespray uses `yamllint` and `ansible-lint`. To run them locally use `yamllint .` and `ansible-lint`
#### Molecule
[molecule](https://github.com/ansible-community/molecule) is designed to help the development and testing of Ansible roles. In Kubespray you can run it all for all roles with `./tests/scripts/molecule_run.sh` or for a specific role (that you are working with) with `molecule test` from the role directory (`cd roles/my-role`).
When developing or debugging a role it can be useful to run `molecule create` and `molecule converge` separately. Then you can use `molecule login` to SSH into the test environment.
#### Vagrant
Vagrant with VirtualBox or libvirt driver helps you to quickly spin test clusters to test things end to end. See [README.md#vagrant](README.md)
### Contributing A Patch
1. Submit an issue describing your proposed change to the repo in question.
2. The [repo owners](OWNERS) will respond to your issue promptly.
3. Fork the desired repo, develop and test your code changes.
4. Sign the CNCF CLA (https://git.k8s.io/community/CLA.md#the-contributor-license-agreement)
4. Sign the CNCF CLA (<https://git.k8s.io/community/CLA.md#the-contributor-license-agreement>)
If you have questions, check the [documentation](https://kubespray.io) and join us on the [kubernetes slack](https://kubernetes.slack.com), channel **\#kubespray**.
If you have questions, check the documentation at [kubespray.io](https://kubespray.io) and join us on the [kubernetes slack](https://kubernetes.slack.com), channel **\#kubespray**.
You can get your invite [here](http://slack.k8s.io/)
- Can be deployed on **AWS, GCE, Azure, OpenStack, vSphere, Packet (bare metal), Oracle Cloud Infrastructure (Experimental), or Baremetal**
- **Highly available** cluster
- **Composable** (Choice of the network plugin for instance)
- Supports most popular **Linux distributions**
- **Continuous integration tests**
- Can be deployed on **[AWS](docs/aws.md), GCE, [Azure](docs/azure.md), [OpenStack](docs/openstack.md), [vSphere](docs/vsphere.md), [Packet](docs/packet.md) (bare metal), Oracle Cloud Infrastructure (Experimental), or Baremetal**
- **Highly available** cluster
- **Composable** (Choice of the network plugin for instance)
- Supports most popular **Linux distributions**
- **Continuous integration tests**
Quick Start
-----------
## Quick Start
To deploy the cluster you can use :
@ -21,191 +19,226 @@ To deploy the cluster you can use :
#### Usage
# Install dependencies from ``requirements.txt``
sudo pip install -r requirements.txt
```ShellSession
# Install dependencies from ``requirements.txt``
sudo pip3 install -r requirements.txt
# Copy ``inventory/sample`` as ``inventory/mycluster``
cp -rfp inventory/sample inventory/mycluster
# Copy ``inventory/sample`` as ``inventory/mycluster``
cp -rfp inventory/sample inventory/mycluster
# Update Ansible inventory file with inventory builder
Note: When Ansible is already installed via system packages on the control machine, other python packages installed via `sudo pip install -r requirements.txt` will go to a different directory tree (e.g. `/usr/local/lib/python2.7/dist-packages` on Ubuntu) from Ansible's (e.g. `/usr/lib/python2.7/dist-packages/ansible` still on Ubuntu).
As a consequence, `ansible-playbook` command will fail with:
```
```raw
ERROR! no action detected in task. This often indicates a misspelled module name, or incorrect module path.
```
probably pointing on a task depending on a module present in requirements.txt (i.e. "unseal vault").
probably pointing on a task depending on a module present in requirements.txt.
One way of solving this would be to uninstall the Ansible package and then, to install it via pip but it is not always possible.
A workaround consists of setting `ANSIBLE_LIBRARY` and `ANSIBLE_MODULE_UTILS` environment variables respectively to the `ansible/modules` and `ansible/module_utils` subdirectories of pip packages installation location, which can be found in the Location field of the output of `pip show [package]` before executing `ansible-playbook`.
A simple way to ensure you get all the correct version of Ansible is to use the [pre-built docker image from Quay](https://quay.io/repository/kubespray/kubespray?tab=tags).
You will then need to use [bind mounts](https://docs.docker.com/storage/bind-mounts/) to get the inventory and ssh key into the container, like this:
```ShellSession
docker pull quay.io/kubespray/kubespray:v2.15.1
docker run --rm -it --mount type=bind,source="$(pwd)"/inventory/sample,dst=/inventory \
For Vagrant we need to install python dependencies for provisioning tasks.
Check if Python and pip are installed:
python -V && pip -V
```ShellSession
python -V && pip -V
```
If this returns the version of the software, you're good to go. If not, download and install Python from here <https://www.python.org/downloads/source/>
Install the necessary requirements
sudo pip install -r requirements.txt
vagrant up
```ShellSession
sudo pip install -r requirements.txt
vagrant up
```
Documents
---------
## Documents
- [Requirements](#requirements)
- [Kubespray vs ...](docs/comparisons.md)
- [Getting started](docs/getting-started.md)
- [Ansible inventory and tags](docs/ansible.md)
- [Integration with existing ansible repo](docs/integration.md)
- [Deployment data variables](docs/vars.md)
- [DNS stack](docs/dns-stack.md)
- [HA mode](docs/ha-mode.md)
- [Network plugins](#network-plugins)
- [Vagrant install](docs/vagrant.md)
- [CoreOS bootstrap](docs/coreos.md)
- [Debian Jessie setup](docs/debian.md)
- [openSUSE setup](docs/opensuse.md)
- [Downloaded artifacts](docs/downloads.md)
- [Cloud providers](docs/cloud.md)
- [OpenStack](docs/openstack.md)
- [AWS](docs/aws.md)
- [Azure](docs/azure.md)
- [vSphere](docs/vsphere.md)
- [Packet Host](docs/packet.md)
- [Large deployments](docs/large-deployments.md)
- [Upgrades basics](docs/upgrades.md)
- [Roadmap](docs/roadmap.md)
- [Requirements](#requirements)
- [Kubespray vs ...](docs/comparisons.md)
- [Getting started](docs/getting-started.md)
- [Setting up your first cluster](docs/setting-up-your-first-cluster.md)
- [Ansible inventory and tags](docs/ansible.md)
- [Integration with existing ansible repo](docs/integration.md)
- [Deployment data variables](docs/vars.md)
- [DNS stack](docs/dns-stack.md)
- [HA mode](docs/ha-mode.md)
- [Network plugins](#network-plugins)
- [Vagrant install](docs/vagrant.md)
- [Flatcar Container Linux bootstrap](docs/flatcar.md)
Note: The list of validated [docker versions](https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG-1.13.md) was updated to 1.11.1, 1.12.1, 1.13.1, 17.03, 17.06, 17.09, 18.06. kubeadm now properly recognizes Docker 18.09.0 and newer, but still treats 18.06 as the default supported version. The kubelet might break on docker's non-standard version numbering (it no longer uses semantic versioning). To ensure auto-updates don't break your cluster look into e.g. yum versionlock plugin or apt pin).
## Container Runtime Notes
Note 2: rkt support as docker alternative is limited to control plane (etcd and
kubelet). Docker is still used for Kubernetes cluster workloads and network
plugins' related OS services. Also note, only one of the supported network
plugins can be deployed for a given single cluster.
- The list of available docker version is 18.09, 19.03 and 20.10. The recommended docker version is 19.03. The kubelet might break on docker's non-standard version numbering (it no longer uses semantic versioning). To ensure auto-updates don't break your cluster look into e.g. yum versionlock plugin or apt pin).
- The cri-o version should be aligned with the respective kubernetes version (i.e. kube_version=1.20.x, crio_version=1.20)
Requirements
------------
## Requirements
- **Ansible v2.7.6 (or newer) and python-netaddr is installed on the machine
that will run Ansible commands**
- **Jinja 2.9 (or newer) is required to run the Ansible Playbooks**
- The target servers must have **access to the Internet** in order to pull docker images. Otherwise, additional configuration is required (See [Offline Environment](https://github.com/kubernetes-sigs/kubespray/blob/master/docs/downloads.md#offline-environment))
- The target servers are configured to allow **IPv4 forwarding**.
- **Your ssh key must be copied** to all the servers part of your inventory.
- The **firewalls are not managed**, you'll need to implement your own rules the way you used to.
- **Minimum required version of Kubernetes is v1.19**
- **Ansible v2.9.x, Jinja 2.11+ and python-netaddr is installed on the machine that will run Ansible commands, Ansible 2.10.x is experimentally supported for now**
- The target servers must have **access to the Internet** in order to pull docker images. Otherwise, additional configuration is required (See [Offline Environment](docs/offline-environment.md))
- The target servers are configured to allow **IPv4 forwarding**.
- If using IPv6 for pods and services, the target servers are configured to allow **IPv6 forwarding**.
- The **firewalls are not managed**, you'll need to implement your own rules the way you used to.
in order to avoid any issue during deployment you should disable your firewall.
- If kubespray is ran from non-root user account, correct privilege escalation method
- If kubespray is ran from non-root user account, correct privilege escalation method
should be configured in the target servers. Then the `ansible_become` flag
or command parameters `--become or -b` should be specified.
Hardware:
Hardware:
These limits are safe guarded by Kubespray. Actual requirements for your workload can differ. For a sizing guide go to the [Building Large Clusters](https://kubernetes.io/docs/setup/cluster-large/#size-of-master-and-master-components) guide.
- Master
- Memory: 1500 MB
- Node
- Memory: 1024 MB
- Master
- Memory: 1500 MB
- Node
- Memory: 1024 MB
Network Plugins
---------------
## Network Plugins
You can choose between 6 network plugins. (default: `calico`, except Vagrant uses `flannel`)
You can choose between 10 network plugins. (default: `calico`, except Vagrant uses `flannel`)
- [Calico](https://docs.projectcalico.org/latest/introduction/) is a networking and network policy provider. Calico supports a flexible set of networking options
designed to give you the most efficient networking across a range of situations, including non-overlay
and overlay networks, with or without BGP. Calico uses the same engine to enforce network policy for hosts,
pods, and (if using Istio and Envoy) applications at the service mesh layer.
- [canal](https://github.com/projectcalico/canal): a composition of calico and flannel plugins.
- [canal](https://github.com/projectcalico/canal): a composition of calico and flannel plugins.
- [cilium](http://docs.cilium.io/en/latest/): layer 3/4 networking (as well as layer 7 to protect and secure application protocols), supports dynamic insertion of BPF bytecode into the Linux kernel to implement security services, networking and visibility logic.
- [cilium](http://docs.cilium.io/en/latest/): layer 3/4 networking (as well as layer 7 to protect and secure application protocols), supports dynamic insertion of BPF bytecode into the Linux kernel to implement security services, networking and visibility logic.
- [contiv](docs/contiv.md): supports vlan, vxlan, bgp and Cisco SDN networking. This plugin is able to
apply firewall policies, segregate containers in multiple network and bridging pods onto physical networks.
- [ovn4nfv](docs/ovn4nfv.md): [ovn4nfv-k8s-plugins](https://github.com/opnfv/ovn4nfv-k8s-plugin) is the network controller, OVS agent and CNI server to offer basic SFC and OVN overlay networking.
- [weave](docs/weave.md): Weave is a lightweight container overlay network that doesn't require an external K/V database cluster.
(Please refer to `weave` [troubleshooting documentation](http://docs.weave.works/weave/latest_release/troubleshooting.html)).
- [weave](docs/weave.md): Weave is a lightweight container overlay network that doesn't require an external K/V database cluster.
(Please refer to `weave` [troubleshooting documentation](https://www.weave.works/docs/net/latest/troubleshooting/)).
- [kube-router](docs/kube-router.md): Kube-router is a L3 CNI for Kubernetes networking aiming to provide operational
- [kube-ovn](docs/kube-ovn.md): Kube-OVN integrates the OVN-based Network Virtualization with Kubernetes. It offers an advanced Container Network Fabric for Enterprises.
- [kube-router](docs/kube-router.md): Kube-router is a L3 CNI for Kubernetes networking aiming to provide operational
simplicity and high performance: it uses IPVS to provide Kube Services Proxy (if setup to replace kube-proxy),
iptables for network policies, and BGP for ods L3 networking (with optionally BGP peering with out-of-cluster BGP peers).
It can also optionally advertise routes to Kubernetes cluster Pods CIDRs, ClusterIPs, ExternalIPs and LoadBalancerIPs.
- [multus](docs/multus.md): Multus is a meta CNI plugin that provides multiple network interface support to pods. For each interface Multus delegates CNI calls to secondary CNI plugins such as Calico, macvlan, etc.
- [macvlan](docs/macvlan.md): Macvlan is a Linux network driver. Pods have their own unique Mac and Ip address, connected directly the physical (layer 2) network.
- [multus](docs/multus.md): Multus is a meta CNI plugin that provides multiple network interface support to pods. For each interface Multus delegates CNI calls to secondary CNI plugins such as Calico, macvlan, etc.
The choice is defined with the variable `kube_network_plugin`. There is also an
option to leverage built-in cloud provider networking instead.
The Kubespray Project is released on an as-needed basis. The process is as follows:
1. An issue is proposing a new release with a changelog since the last release
2. At least one of the [OWNERS](OWNERS) must LGTM this release
3.An OWNER runs `git tag -s $VERSION` and inserts the changelog and pushes the tag with `git push $VERSION`
4.The release issue is closed
5. An announcement email is sent to `kubernetes-dev@googlegroups.com` with the subject `[ANNOUNCE] Kubespray $VERSION is released`
2. At least one of the [approvers](OWNERS_ALIASES) must approve this release
3.The `kube_version_min_required` variable is set to `n-1`
4.Remove hashes for [EOL versions](https://github.com/kubernetes/sig-release/blob/master/releases/patch-releases.md) of kubernetes from `*_checksums` variables.
5. An approver creates [new release in GitHub](https://github.com/kubernetes-sigs/kubespray/releases/new) using a version and tag name like `vX.Y.Z` and attaching the release notes
6. An approver creates a release branch in the form `release-X.Y`
7. The corresponding version of [quay.io/kubespray/kubespray:vX.Y.Z](https://quay.io/repository/kubespray/kubespray) and [quay.io/kubespray/vagrant:vX.Y.Z](https://quay.io/repository/kubespray/vagrant) docker images are built and tagged
8. The `KUBESPRAY_VERSION` variable is updated in `.gitlab-ci.yml`
9. The release issue is closed
10. An announcement email is sent to `kubernetes-dev@googlegroups.com` with the subject `[ANNOUNCE] Kubespray $VERSION is released`
11. The topic of the #kubespray channel is updated with `vX.Y.Z is released! | ...`
## Major/minor releases, merge freezes and milestones
## Major/minor releases and milestones
* Kubespray does not maintain stable branches for releases. Releases are tags, not
branches, and there are no backports. Therefore, there is no need for merge
freezes as well.
* For major releases (vX.Y) Kubespray maintains one branch (`release-X.Y`). Minor releases (vX.Y.Z) are available only as tags.
*Fixes for major releases (vX.x.0) and minor releases (vX.Y.x) are delivered
*Security patches and bugs might be backported.
* Fixes for major releases (vX.Y) and minor releases (vX.Y.Z) are delivered
via maintenance releases (vX.Y.Z) and assigned to the corresponding open
milestone (vX.Y). That milestone remains open for the major/minor releases
support lifetime, which ends once the milestone closed. Then only a next major
# node that can be used to access the masters and minions
use_bastion: false
# Set this to a prefered name that will be used as the first part of the dns name for your bastotion host. For example: k8s-bastion.<azureregion>.cloudapp.azure.com.
# Set this to a preferred name that will be used as the first part of the dns name for your bastotion host. For example: k8s-bastion.<azureregion>.cloudapp.azure.com.
# This is convenient when exceptions have to be configured on a firewall to allow ssh to the given bastion host.
# Running systemd-machine-id-setup doesn't create a unique id for each node container on Debian,
# handle manually
- name:Re-create unique machine-id (as we may just get what comes in the docker image), needed by some CNIs for mac address seeding (notably weave)
- name:Re-create unique machine-id (as we may just get what comes in the docker image), needed by some CNIs for mac address seeding (notably weave)# noqa 301
MetalLB hooks into your Kubernetes cluster, and provides a network load-balancer implementation. In short, it allows you to create Kubernetes services of type “LoadBalancer” in clusters that don’t run on a cloud provider, and thus cannot simply hook into paid products to provide load-balancers.
```
This playbook aims to automate [this](https://metallb.universe.tf/tutorial/layer2/tutorial). It deploys MetalLB into kubernetes and sets up a layer 2 loadbalancer.
@ -8,19 +8,19 @@ In the same directory of this ReadMe file you should find a file named `inventor
Change that file to reflect your local setup (adding more machines or removing them and setting the adequate ip numbers), and save it to `inventory/sample/k8s_gfs_inventory`. Make sure that the settings on `inventory/sample/group_vars/all.yml` make sense with your deployment. Then execute change to the kubespray root folder, and execute (supposing that the machines are all using ubuntu):
If your machines are not using Ubuntu, you need to change the `--user=ubuntu` to the correct user. Alternatively, if your Kubernetes machines are using one OS and your GlusterFS a different one, you can instead specify the `ansible_ssh_user=<correct-user>` variable in the inventory file that you just created, for each machine/VM:
First step is to fill in a `my-kubespray-gluster-cluster.tfvars` file with the specification desired for your cluster. An example with all required variables would look like:
As explained in the general terraform/openstack guide, you need to source your OpenStack credentials file, add your ssh-key to the ssh-agent and setup environment variables for terraform:
@ -8,7 +8,7 @@ Installs and configures GlusterFS on Linux.
For GlusterFS to connect between servers, TCP ports `24007`, `24008`, and `24009`/`49152`+ (that port, plus an additional incremented port for each additional server in the cluster; the latter if GlusterFS is version 3.4+), and TCP/UDP port `111` must be open. You can open these using whatever firewall you wish (this can easily be configured using the `geerlingguy.firewall` role).
This role performs basic installation and setup of Gluster, but it does not configure or mount bricks (volumes), since that step is easier to do in a series of plays in your own playbook. Ansible 1.9+ includes the [`gluster_volume`](https://docs.ansible.com/gluster_volume_module.html) module to ease the management of Gluster volumes.
This role performs basic installation and setup of Gluster, but it does not configure or mount bricks (volumes), since that step is easier to do in a series of plays in your own playbook. Ansible 1.9+ includes the [`gluster_volume`](https://docs.ansible.com/ansible/latest/collections/gluster/gluster/gluster_volume_module.html) module to ease the management of Gluster volumes.
## Role Variables
@ -21,7 +21,7 @@ You can specify a `default_release` for apt on Debian/Ubuntu by overriding this
glusterfs_ppa_use: yes
glusterfs_ppa_version: "3.5"
For Ubuntu, specify whether to use the official Gluster PPA, and which version of the PPA to use. See Gluster's [Getting Started Guide](http://www.gluster.org/community/documentation/index.php/Getting_started_install) for more info.
For Ubuntu, specify whether to use the official Gluster PPA, and which version of the PPA to use. See Gluster's [Getting Started Guide](https://docs.gluster.org/en/latest/Quick-Start-Guide/Quickstart/) for more info.
cluster:"{% for item in groups['gfs-cluster'] -%}{{ hostvars[item]['ip']|default(hostvars[item].ansible_default_ipv4['address']) }}{% if not loop.last %},{% endif %}{%- endfor %}"
when:inventory_hostname == groups['kube-master'][0] and groups['gfs-cluster'] is defined and hostvars[groups['gfs-cluster'][0]].gluster_disk_size_gb is defined
when:inventory_hostname == groups['kube_control_plane'][0] and groups['gfs-cluster'] is defined and hostvars[groups['gfs-cluster'][0]].gluster_disk_size_gb is defined
- name:Kubernetes Apps | Set GlusterFS endpoint and PV
# Deploy Heketi/Glusterfs into Kubespray/Kubernetes
This playbook aims to automate [this](https://github.com/heketi/heketi/blob/master/docs/admin/install-kubernetes.md) tutorial. It deploys heketi/glusterfs into kubernetes and sets up a storageclass.
## Important notice
> Due to resource limits on the current project maintainers and general lack of contributions we are considering placing Heketi into a [near-maintenance mode](https://github.com/heketi/heketi#important-notice)
## Client Setup
Heketi provides a CLI that provides users with a means to administer the deployment and configuration of GlusterFS in Kubernetes. [Download and install the heketi-cli](https://github.com/heketi/heketi/releases) on your client machine.
## Install
Copy the inventory.yml.sample over to inventory/sample/k8s_heketi_inventory.yml and change it according to your setup.
Container image collecting script for offline deployment
This script has two features:
(1) Get container images from an environment which is deployed online.
(2) Deploy local container registry and register the container images to the registry.
Step(1) should be done online site as a preparation, then we bring the gotten images
to the target offline environment.
Then we will run step(2) for registering the images to local registry.
Step(1) can be operated with:
```shell
manage-offline-container-images.sh create
```
Step(2) can be operated with:
```shell
manage-offline-container-images.sh register
```
## generate_list.sh
This script generates the list of downloaded files and the list of container images by `roles/download/defaults/main.yml` file.
Run this script will generates three files, all downloaded files url in files.list, all container images in images.list, all component version in generate.sh.
```shell
bash generate_list.sh
tree temp
temp
├── files.list
├── generate.sh
└── images.list
0 directories, 3 files
```
In some cases you may want to update some component version, you can edit `generate.sh` file, then run `bash generate.sh | grep 'https' > files.list` to update file.list or run `bash generate.sh | grep -v 'https'> images.list` to update images.list.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
